10 3d Printer Slicer Suggestions for Better Prints (Part 1)

[@hoggif]

Very good tips. A beginner will search those for a while. Nice to have those all in one video.

[@stephh8186]

Thank. For your content and easy to follow tutorials... yes im really learning. Who said old digs cant learn! Thank you also for straight talking with zero expletives. It makes listening and learning a breeze without having to filter out stuff... your a brilliant teacher... my grandaughters are also learning with you because of this. ... kind regards

[@MakeWithTech]

Thanks for the kind words.

[@JohnHavord]

Very useful video. Look forward to part 2.

[@johnkelley9877]

I was wondering about rather the the fill or wall thickness was the most important and you have answered that question. Thanks so much.

[@MakeWithTech]

Glad I was able to help.

[@HighbridgeD]

Your channel really does deserve to have more subscribers. I look forward to the full series of topics being presented here. Thanks for sharing!

[@MakeWithTech]

Thanks.

[@henryrummins973]

The channel is great and it's growing which it deserves to.

[@r3dsign]

You save lives thanks

[@stolz5573]

Another great video! Looking forward to Part 2

[@gilabrody6339]

AMAZING VIDEO!

[@rapalma38]

*Eres un gran maestro, describes paso a paso, para que todo el mundo entienda, los mejores saludos desde argentina, espero pronto el proximo video* You are a great teacher, you describe step by step, so that everyone understands, the best greetings from Argentina, I hope soon the next video

[@rustynutsnboltz]

Thanks Dr Vax. Awesome info. I just printed a test Benchy but am having trouble getting the bas off the bottom. Can you tell me hat settings I should be looking at please? Cheers

[@henryrummins973]

Excellent as always Dr Vax, this is really good stuff and first rate narration by your good self!

[@polemagnetfpv]

Thanks Doc you straightened me out on a few thinks. Love your channel.

[@terrylindsay445]

Hi , Have you ever made a part 2? Would be great!

[@C-M-E]

I've been chasing an under extrusion problem on a new printer for days now, going through settings with a microscope, doing test prints on evolutions of findings, bed leveling after bed leveling (though I did also find that the bed is so warped that I got a replacement out of the warranty department) etc, and still having them fail. I came across one of your videos (and have been binging them in the background since!) and may have finally found the problem, and man, it's a massive face palm. Somehow in all the custom profiles I made for a non-supported printer (a massive delta in Cura), after upgrading to 4.5, the filament reverted to the base 2.85, and of course I'm using 1.75. And somehow I got through the printer tab just fine and missed the extruder tab. Oh $#!t!! Guess who just had a massive deletion party wiping 2 weeks of prep models...

[@russwoodward8251]

Great stuff Dr. Vax. Thank you.

[@MakeWithTech]

Thanks for commenting

[@danielweitz6632]

These are very helpful. Do you have a video on printer maintenance?

[@MakeWithTech]

No. But a great idea. Let me get in into the schedule.

[@karipenttila2655]

You are always so cheer, i like you mood and of course topics.

[@deonholt]

Thank you so much for this. I cannot find the right setting so see everything the same you do when previewing. I cannot see all the colours you have in Cura. I also have it set to layer view and Line Type. Any advice will be most welcome.

[@soggynode]

Very good video as always and a nice nod to Stefan over at CNC Kitchen. I have a long list of channels I watch when I want to know how to do something with my printer. DrVax, Chep, Michael over at Teaching Tech, Thomas Sanladerer, Angus at Makers Muse... the list goes on and on. Generally, when I want to know why I'm doing something, I visit Stefan's channel. Keep up the good work and I look forward to watching part two of this topic.

[@vrich3733]

Your vids are so helpful! Thank you!

[@cache4pat]

Again an awesomely instructional video. I was hoping you would have commented on Gyroid Fill type, but otherwise all the detail was very helpful.

[@MakeWithTech]

I am planning to do a video where I will print without tops each of the fill patterns available and show and discuss them in a video. My list of potential videos is getting quite long and I have two new printer reviews I will be doing over the next few weeks. So it may be a while but I will get to it.

[@MultiAnnelore]

your a good teacher thanks alot

[@MakeWithTech]

Thanks for the comment.

[@davodduncan]

Thank you for great videoI was wonderingIs it possibleTo use optimise wall in Prusa Slicer.?Keep up the great work.

[@laurahowrey1572]

This was so helpful, but I can't find part 2!

[@woodwaker1]

Great video. What version of CURA are you using? I have never seen the option to see the print progress of a layer. I use the preview all the time, but can only see one layer at a time, not the movement within a layer.

[@MakeWithTech]

4.1

[@kubo527]

If You can't see it, your graphic card is obsolete and Cura runs in compatibility mode.

[@woodwaker1]

@@kubo527 Thanks for the idea. I'm running an I5 using the internal on chip graphics, would that be the problem?

[@kubo527]

@@woodwaker1 Most likely yes...

[@ath_greek]

have you tried Stereolithography (SLA) printer or DLP?

[@MakeWithTech]

Not yet

[@koolkevin2357]

You, Sir, are a national treasure. Thanks for sharing, the way you do it is so easy and enjoyable to learn. ~(:~)

[@MakeWithTech]

Many thanks!

[@rickthornton6167]

new to cure looking to be better at it were can I find information

[@ka5kla]

God bless you sir

[@equistremo]

Can't find part 2

[@thebeststooge]

Seems to me this was 90% Cura which I don't use.

[@MakeWithTech]

Yep. However why the names of parameters are different the concepts are similar across slicers.