DSC NEO PG9945 How to enroll or delete

This video Shows how to enroll and remove the DSC NEO PG9945.
Click here to subscribe to my channel bit.ly/1UeLONG
This transmitter has selectable inputs as NO, NC and EOL Supervision
link to the
DSC NEO PG9945 amzn.to/1la20ov

[@lr5648]

Great video man. Thank you! Didn't know exactly how to install this sensor and you cleared it out for me.

[@adamsargent8929]

Im using one just regular install, and I was told by DSC if your using a metal frame, to use PG9945, i've done that, so im not using the reed switch...and originally it worked, i did my test, but after powering down and back up, im getting a "not networked" trouble, now that goes away eventually but the zone doesn't operate anymore.

[@francisgabagat2291]

this video saved my ass. thank you

[@theautomationguy4726]

Your welcome.

[@LonnieSells-oz8po]

How do you delete and add a wireless zone on a dsc rfk5500

[@mmmerter12558]

did you had any issues with wireless contact on cold weather, battery, moisture?

[@zaf88]

very helpful, however i cannot get in to wireless config to use the aux inputs. when i use my neo touchscreen and go to 804, then to zone 3, then toggles the only option i can do is supervised Y or N. Says more options as well but cant select that by pressing start (just gives long beep). any help would be appreciated

[@alextran10]

Please make video PG9945 hook up to waterflow sprinkler. Thank you

[@8Jallin]

Did you figure it out

[@alextran10]

@@8Jallin not yet. Got the idea but still not sure

[@8Jallin]

I think you need the pg9985

[@guesswhomartin9249]

Thank for sharing this video, but I do have a question; or maybe I missed it. You said you CANNOT use the same transmitter for both hardwire and wireless. I'm not sure that to be correct. I'll have to do a test on that, or call DSC tech support direct. I think it is do-able. but I could be wrong. e.I with the same transmitter, wireless on zone 8, hardwire zone 9. but same transmitter. I will look into this. I'll let you know what I find. you might be right, but I think you're wrong.

[@rohamtavakkoli7562]

Manual says the same thing. Did you ever confirm this with the manufacturer?

[@guesswhomartin9249]

@@rohamtavakkoli7562 I think I did prove you wrong. But it's been such a long time. I don't remember anymore. I also got away from DSC completely. Today I deal only with Vista Family Products, The Bosch Panel. I don't know how long its been, I haven't touched DSC in yrs. I guess I moved on. Good luck to you. Have a great day.

[@rohamtavakkoli7562]

@@guesswhomartin9249 I meant that the manual seems to suggest that the aux and wireless can be used at the same time. Ok, thank you, have good day!

[@jamesmorgan_o2716]

Hi I have this cellular trbl error, how do I clear the error

[@Formates]

thank you.

[@user-br1or6fb1d]

What could cause the dsc neo not to recognise wireless motion sensors? Try multiple wireless sensors and none work

[@mrshiester6057]

How do you remove the sensor on the left

[@TheRealThrillaGorilla]

Great videos!

[@willisv]

Great video thanks!

[@bricende1]

NICE VIDEO THAT HELP L WAS WONDERING WHY L COULD NOT BE ABLE TO USE THE TERMINAL L CHECK ON USER GUIDE NOTHING EXPLAIN L JUST REALISED THAT L WAS SUPPOSE TO JUST GO ON SECTION 804 AND EDIT THE ZONE TO BE ABLE TO OPERATED LIKE A TERMINAL BY TURN ON THE TERMINAL , AND TURN OFF THE RED SWITCH

[@ade4783]

3:41 min still you have error even you covered the device .