Homemade Exhaust MUFFLER For Trimmer ?

Aldin : / @aldin7382
Skiljo & Experiments TV : / channel
INSTAGRAM : / doctords17
FACEBOOK : / david.skrbin.1
If I have helped you and if you liked this creative video sure to subscribe and like the video;) I'd much helped me ...;)
...
Ako sam vam imalo pomogao i ako vam se svidio ovaj kreativni video obavezno se pretplatite i lajkujte video ;) PUNO BIH MI POMOGLI... ;)

[@DShomemade]

Homemade Chain for TRIMMER ? + TEST kzbin.info/www/bejne/h3_beHdvrqiWaLs

[@prefabbricatiromanisrlroma8546]

Doctor D.

[@jazzysking5070]

Looks pretty cool to me if do it just to pass off my mom lol

[@santosandiana390]

Tyler Stewart

[@0BRAINS0]

Doctor D.S. its struggling for air intake because you fucked up the back pressure. I did this last year using a high performance scooter muffler on one of my husquaverna trimmers and after tinkering with a few things like a larger fuel line that is braided stainless steel, opened up the air intake and installed a multistage/terminal spark plug and put a crossdrilled saw blade and aluminum chain saw blade(2) and I use it on jobs where I'm clearing out high brush/thicket. People ask me a lot "wtf is that?" Lol. Works really good for what I use it for.

[@BerntJacGketel]

Doctor D.S. K

[@goliathprojects7354]

Isn't a muffler supposed to silence it? *task failed successfully*

[@tonyv1505]

It is a custom muffler you know what they say about custom mufflers its the opposite of silent lol

[@DShomemade]

Homemade DOUBLE Exhaust MUFFLER For Trimmer ? :D kzbin.info/www/bejne/iInQh5KHjp5goNk

[@ScarryMarian2012]

Doctor D.S. The ideea is great,only one BAD thing you did...you used very thick materials and that will be very overheating after 30 minutes of work,BAD RESULT,good result you get if you are using (maximum) 0.8mm steel sheet,otherwise the muffler will overheat very bad because cannot cool fast enough due the thickness of the materials...consider this as one of my previous experience with a home made (similar type of build) muffler on a chainsaw,great noise reduction (without loosing power) but severe overheat 20 minutes later...the plastic case around started to melt and i stopped the engine and water spray to cooldown the muffler mounting back the original muffler was a better ideea untill i built a new muffler but with thinner materials (this time welded with oxyacethilenic torch),with 0.6mm steel sheet and 0.8mm wall thickness pipe,that was a HUUGE improovement,after 7 years,that muffler still sits on the chainsaw,haven't used since 3 years because i moved on city with rent apartment. But the building ideea is great !

[@paolavolker3954]

Doctor D.S. tkcdzj7ivan

[@kardiata6481]

Doctor D.S.

[@phongphan7198]

Paola Volker Chào

[@user-yy2rd1nt7q]

Зато по хрдкору

[@bullainsworth3130]

Hey buddy. I think you are confused as to what the word “muffler” means.

[@ksich8142]

A muffler can be made to make more noise or less

[@goldenchicken9326]

I've never heard anyone say '"let's muffle this thing nice and loud"

[@henninghellerud]

@@ksich8142 no. That is maybe the general idea of that a muffler is the box at the end of the exhaust. A muffler is technically a silencer or something to reduce noice. When you are talking about making it louder you are using a resonator made specifically to make the noise louder, as a normal resonator is made to make it less loud.

[@ksich8142]

@@henninghellerud not necessarily as resonators are typically used to muffle the sound at different rpm ranges/frequencies. Usually the louder and faster sound waves are captured by the resonator then the muffler receives the lower end of frequencies

[@callenpickard820]

Is a mini chairy bomb muffler look it up you can buy them

[@skinwalker6024]

It sounds like Honda civic . Good job

[@O_ADG]

What year Honda Civic is that

[@Cheetahtos]

The new muffler you made is more like silencer for 4 stroke engine. I believe your engine is 2 stroke. In 2 stroke engine you need resonance chamber before the silencer, otherwise your fuel consumption will be higher and your engine will loose power at certain rpm.

[@henninghellerud]

What he made is just a fancy straight pipe…

[@eattanachos8271]

Not only is it heavier now, I am dumber now for watching the whole thing!

[@charlesborders2893]

hehehehe aha haha aha hahaha

[@uravggamer4620]

You saved me, thank you

[@andyh7537]

"A grinder and paint...makes me the welder I ain't". Nice work man.

[@aero5937]

How to rice out your trimmer

[@esteracing7049]

Excuse me? That's some glorious 2 stroke sound

[@SpaceShipDeathstar]

How to double the weight of your mower.

[@jayomega29]

That exhaust will burn the piston out in a season of regular use. 2 stroke motors need specific exhaust if they don’t have expansion chambers

[@nadoveza4961]

please shut up.. exhaust is exhaust..

[@harunattal]

You’re right

[@monoracer_]

@@nadoveza4961 and you is stupid :)

[@joejones6968]

NOW ALL the you need is chrome handles, dual intake, bigger yard rope head, chrome plated of course, 3rd stage wing, and a hand brake for those really big drifts, around those trees and bird baths, your all set!!!

[@foxsquirrel3038]

Weeds are shaking with terror… neighbors are jealous

[@TecumsehRulesbcserk]

That is quite a burn hazard mate

[@theoperator9474]

Id cook my arm either way.

[@Predic94]

This muffler doesn't do anything. It can only reduce the power od the engine itself. 2t engines requier resonating muffler.

[@lorenzo42p]

choking the exhaust. the revving at the end of the video was required or it would stall out. I recognize that sound.

[@henmich]

You need to install a muffler on that music.

[@jurriendw050]

Nice honda

[@AXNJXN1]

Smart build... Any DB ratings to know for sure if the volume of sound was deadend?

[@scottwieskamp2420]

That metal is so thick it should last about 2000 years😂

[@user-ym4jj9uw5v]

Толщина металла маловато.надо было с 10ки делать.

[@user-ge8tq4ki1m]

Согласен, как то не то 😂

[@Doug56]

Just as loud, and nice when you touch it on your bare arm.

[@vitominaudo7440]

Che cose

[@brazilchem]

You dropped a good 2dB mate. The paintjob is badass tho.

[@AlexeyWas]

Глушитель весить будет как триммер в сборе 😂

[@jamescarter1500]

A burn is the worst pain there is. And you have for sure got something right there that when it burns you your gonna wear the mark the rest of your life👆💯

[@andyjota8906]

Home mace muffler 10 times the size of stock and its louder........😂😂😂😂😂😂 you didnt make a muffler you made an amplifier

[@ktmkiller2968]

New Stihl racing exhaust available on your nearest workshop!!! Awesome dude! I really like it👍👍

[@jamesexploringonline872]

Great job, very functional. Like the way you go about

[@doorguner01]

Glasspack nice! Only problem is the glass wool will be soaked in oil over time May be quieter too?

[@nickmagee4747]

terry jenkins it would make it louder that's why with two stroke exhaust you have to repack them

[@xxyvng6831]

How to annoy neighbor

[@44punisherable]

Cool idea and for fun, I'd do something similar just to annoy my fancy neighbors with the electric trimmer. Well done mate!!

[@MickB235]

Yeah I think you need to test it in the same spot .not surprised it sounded a crap ton louder in your shed than the first test you did completely outside

[@gattonpc]

Ha ha ha ha.. Epic sound. Dude you are crazy.. in a good way.. nice job. ha ha ha.

[@stuartjohnson6476]

I'm no welder, but I don't think you had the amps up enough. You kept sticking! Also, was there any real difference? To me it sounded louder.

[@neoplasmax]

was it more quiet? Sounded just a little deeper.. You have a decibel meter? before and after readout..

[@frankscamarcia6474]

La verdad está súper buenísimo! Te felicito.....

[@h0ax4316]

Here I am thinking it was gonna be a video on making it quieter... I guess I was wrong 😂

[@DShomemade]

hahahahaha xd

[@nagyattila-gyorgy9686]

Me to ....

[@serje8927]

Толку почти ноль. А вот как себя поведет поршневая на бедной смеси это скоро увидишь.

[@igorgoryainow2437]

Да. К сожалению движок бензокосы слабоват для нормального глушителя

[@jackfisher9833]

Probably the best idea so far.

[@AvidFlyer1928]

GREAT IDEA & CONGRATULATIONS FOR ....PROVING YOUR CONCEPT!!!

[@user-nr2qb4ii1x]

Надо было из рельса делать.

[@2fast4you25]

All that work FOR NOOOOTHING 👌👌👌👌😏😏😏😏😏

[@user-sn4cb9sv9l]

Хорошая работа 👍👍👍

[@bossrosado1540]

Just bought a. Shindaiwa. 450 brushcutter, nice video. Very useful.

[@hangugeohaksaeng]

Is it me, or did he make it louder?

[@ronrampfel8226]

That’s what I thought. Changed the sound, didn’t make it quieter tho.

[@greggsincock238]

@@ronrampfel8226 Should of at least made it a double pass ie.. 2 tubes. Offret would of been a bit different but may of helped out instead of cutting shroud away. Even a side entry would of worked. Mind you, it wont rot out in a hurry lol

[@DanielDaniel-do8uu]

Erorre!

[@ryanle6286]

You're suppose to make a 2 stroke pipe... not a muffler

[@patthesoundguy]

That exhaust is not a bad idea at all! It will definitely get the heat out of that cylinder better than the stock can ever will. Might be slightly louder but it will help the engine last longer as long as the carb gets adjusted after the mod to compensate for the better flow.

[@Wadlen]

для 2тактных двигателей обьем глушителя , должен соответствовать обьему камеры сгорания . Как вы производили расчет глушителя ?

[@Eszentric]

That muffler may be just what I need for my loud-mouth mother-in-law

[@izzeystarz7578]

LMAO.

[@MrDavidelliottjr]

I like it. It sounds way better

[@alex-fz3dh]

Следующий раз банку от противогаза приделай, лайк за бестолковые труды

[@a2cryss]

So it is louder now? 2cycles are notoriously hard to quiet down. I tried 2 car mufflers at once on a snowmobile engine with no success. I think it needs to be tuned to the motor.

[@patthesoundguy]

That exhaust is actually a straight pipe now. He should have put fiberglass in the outer pipe before putting it together. You don't have to tune an exhaust but you can build them them tuned. Stock exhausts are not really tuned for performance just noise control. That pipe he built is a little large to be a performance gain for a stock cylinder but should be fine. With kind the of change to the flow that exhaust makes you must re adjust the carb to compensate because it will run lean and potentially burn up the cylinder. With the carb adjustment it could be a good pipe. Good video

[@sayjay6235]

A lot of these Guys in the comments don’t understand that this was just a little project and something fun to do for a video. You guys act like this is a car or dirt bike or something lol just let the man have his fun crafting sheesh.

[@lukepippin4781]

Completely ridiculous, not even slightly practical, but I absolutely love it.

[@tonyd1149]

Nice work. ¿Did throttle response or power improve? Thanks for making & posting this video.

[@user-fs2si5jr8d]

Great idea.Ill make myself. !!

[@user-oy8vk3lq2n]

сказка о потерянном времени

[@ExtremeRenzie_official]

lol

[@DShomemade]

You want a trimmer with two Exhaust?????? XDDDD

[@nikolaisyrtin2031]

Молодец. Четко сделано и быстро.

[@angelmiranda1518]

Dude that sounds bad ass good job

[@illestgeneral9870]

It legit sounds like a Mazda rotary engine. That's lit

[@DShomemade]

Hahahaha xd

[@coastcafeequipment]

what was the point of that ? thought it was going to be quieter

[@deepakm6459]

Great job,awesome

[@uravggamer4620]

Congratulations! Your weed eater is now ready to compete in the Indy 500!🤣

[@jati9782]

Zaboravljas da rukujes sa 2T masinom. Cak iako je u pitanju trimer koji snagu ostvaruje na visokim obrtajima a ne na momentu, on u tom fabrickom "auspuhu" mora da ima barem blagi oblik rezone, jer 2T masina mora da ima bar neki minimalan oblik povratnog potiska. A ti si tom protocnom cijevi izgubio povratni pritisak.

[@DShomemade]

Znam ;) Vratio sam tvornicki auspuh , a ovaj u videu sam napravio iz zezancije ;) Zanimao me zvuk i tjt :D

[@justinw7258]

Is it me or does it sound louder

[@friendlyfriends5046]

I think that was the point. RIP neighbors.

[@jamesb1221222]

Something you could add to the muffler is some insulation like some glasspacks have. That stuff really dampens the noise pretty well.

[@user-gn1zf7ht2c]

Этого автора надо к доктору Дью сводить😅

[@jkgkjgkijk]

Are your arm burns healed up yet?

[@michaelsacy5849]

Before and after sounds the same to me lol

[@PlayingWithFireOutdoors]

Good job. The 2 things i have to comment about. 1 surface prep, grind the paint or rust off. 2 do an undercut when grinding so when you weld it fills the groove. this makes a stronger bond and wont be removed when grinding away excess. good job once again

[@daspedal2730]

How many engines do u buy per season now?

[@SAMPLETEXT285]

Now it looks just like a Honda civic

[@DShomemade]

:D

[@monoracer_]

If u want to do an exhaust on a 2 stroke engine, atleast make an expansion pipe so you also gain allot power. Now the only thing you gained is allot of extra weight with no benefits at all...

[@Umilligecko]

I've been wanting to put a power pipe on my whipper from a RC car with a whipper snipper motor lol that would make more sense

[@cxcre]

Not necessarily it would make more power just not as much an an expansion chamber

[@x_safy]

Pozz doktore jeli izgubio sta snage ili radi isto kao prije

[@ericmayo9415]

Frigging bad ass dude. I dig your skills

[@DEZINHO022]

Por que o cara colocou um escapamento esportivo numa roçadeira? 🤔

[@NathanVdV]

that will destroy your saw, 2stroke exhausts are carefully calculated pieces of art to get the best performance out of the enigne. this is just plain stupid.

[@sbfguy7793]

Hmmm. I think not.

[@charlesborders2893]

hello bud dummys--don't know that people 50 years 10 and up did

[@moneycollectionreview4982]

Zanimljivo😀👏👌👍

[@alexwood7417]

That thing is insane love to have it for my self

[@cameronwyant9015]

Imagine commenting on a two year old video

[@sbfguy7793]

Like you?

[@EdwardMurray06]

Now that you've made a race muffler, try out a baffled silencer type muffler with spark arrestor and see if you can quiet it down a lot.

[@josepmariarieracasadesus2117]

como cambiaras la fibra de cristal o lana de roca, cuando se ensucie de aceites y hollin?...

[@jameswilson197]

Its rather contrary to make a motor quieter but subject your viewer to rock music when the sounds of production were more appropiate. But nice work !

[@luk3.w131]

Don't know why people doing this for garden tools but okay. You lose power with this exaust and ist not really compact with this pipe.

[@HaddixTheKING]

What's the 0-60 on that thing

[@Haroldblingchongtong42]

About 3.4 seconds

[@eugpie716]

the shanks are made of thinner sheet metal. The idea may be good, but it is not an industrial ending. the mower has an additional load of at least 2.5 kg.

[@bobv8219]

Cool man , put some wheels on her. ...... nice job bro

[@Corey497]

there went half the power

[@user-ts7ef1dn4v]

Если была идея увеличить вес, то можно было прицепить гирьку кила на два, а так звук почти тот же. Вывод, убитое время, натруженное плечо.

[@Shypr-4.5.0]

Полностью согласен. Результат нулевой

[@jimkokins9844]

Музон ваще зачётный 💥👍🏄‍♂️💥

[@kermitthefrog6508]

Nice Vtex bro.

[@sunnydoran]

Waist of time. It was noisy and still noisy.

[@hlubforlife]

There's no point putting muffler onto the trimmer, other than making your neighbors think that you have a motorcycle.

[@sveznoi63]

Делай съёмный,и металл тоньше!👍

[@davidmartin8787]

Wonder how many times you burn your arm before putting back to normal

[@DarkSide-yn3sp]

So a civic?

[@hotsauce3700]

Let’s see you make one out of carbon fiber like Yoshimura.

[@DShomemade]

Ohoooo maybeeee :D

[@ciapat81]

Holly Sh.... It's workin WOW❗👍

[@adrianamartinez-dd7yk]

Sounds good