Homemade e-GoKart 72v 3000W FULL PROCES by Unior

[@repairtech9320]

Your shop is cleaner than a hospital. 😯

[@jmyd83]

only after he tidys up 😂

[@thepuppy9089]

He is the doctor...👨‍⚕️

[@Fatpumpumlovah2]

Thats cuz all it ever does is house tools and parts. Thats not a shop just a pretty hole in the wall to fool you guys and sell some tools.

[@repairtech9320]

@@Fatpumpumlovah2 It does look fake. Something new in the same empty storage.

[@asu-57tankoffical]

Mine is a landfill or a active warzone lol

[@rgreerjr]

my right ear is loving this....

[@pecilijevelicanstveni4973]

Hi! Good job! Thank you! Very important: if it is possible ALWAYS, I repeat ALWAYS put the screws from the top down and washers and nuts from the bottom up! This is because of the vibrations. The screw connections are very good friends when mounted properly but worst enemy if they don't. So, the nuts and bolts always have tend to loosen due to vibration. If the bolt is mounted from bottom up it will fall down because of gravity and you loose the connection. The result could be... I don't even want to think about it... Otherwise if the nut falls down the screw will stay and you will have loose connection but you WILL HAVE connection. You will hear that something is wrong and fix it. Believe my 50+ years of experience 🙂

[@bojanmajic]

...but so you find out about the "loose" connection ^^

[@pecilijevelicanstveni4973]

@@bojanmajic Izgleda da ne razumem odgovor. Ako može objašnjenje 🙂

[@no29reggiecOGKRC]

Great work, Just a tip for the cornering on karts, they don't have differentials so if you lean into corners the inside tire will scrub causing you to go slower, so if you want to go faster lean outwards of the corner so that your inside wheel lifts up.

[@douglasr.c.5622]

So nice to see someone clean their machine before going to work on it.

[@wirtdonners4212]

Благодаря этому видео я научился мыть детали и вещи вокруг себя.

[@tjacksondolph4026]

This project is underpowered considering the insane work you put in the build, but great job! This My1020 motor can handle twice what you're using (6kw) easy, but considering the weight, you would need to spend $1500+ on 2 tandem motors, lithium 72-92v's, and 10kw+ controller to compete with gas engines. Actually you could smoke gas engines because of the electric torque.

[@LuigisDesign]

Even more power, not as much than mine but ~30kw peak

[@codyjarvis3426]

A Dr. Keeps everything nice and clean.. you make everything you do look so easy. . Wish I had your talent. I've attempted diy homemade builds alot in the past. Only a couple came o ut right lol ,my chainsaw bike was a good one ...

[@critical]

KZbin should really make a mono button for videos like these

[@norrisabram9577]

Now this is how all how to videos, should be made, we should have a choice, talking or no talking, think you, Job well done 😎

[@davidC-o8q]

I used the same motor, same speed controller "minor alterations", I built a lifepo4 72v 12ah pack, built the cart from scrap steel and a 100$ welder, put good 10" tires on it, with a 3.33 gear ratio, same exact 428 chain as video. I reached 82 mph.

[@kuba5680]

where did you buy the motor?

[@pmp13drc13]

@@kuba5680 Amazon

[@kuba5680]

@@pmp13drc13 and where did you get the battery from?

[@brysoncartmell8536]

I have a feeling he wasn’t using a 72v pack or it wasn’t lithium probably still waiting on his final battery you should be able to hit well over 70mph he was barely going 40

[@DTB2.0]

​@brysoncartmell8536 70? Umm not with that motor and controller

[@thomasguerra6718]

Excellence. Major attention to details. You must have awesome mentors.

[@anthonyreddy2834]

Don't listen to the haters/gonna hate, Phenomenal job!

[@billypoe3703]

Very nice soldering techniques at the battery terminals. Well done.

[@overyonderjustapiece]

there was a plug he just did not want to use. Should NOT have soldered like he did.

[@manicmods]

Nice build and video!! I just used same motor on a mini-atv build, and it hits the ground today 😁 GoKart is next!

[@adamobrien9088]

Dude you just became like one of my biggest heroes did you are awesome

[@patricklacson]

That was an amazing... tool commercial.

[@iulicamincu6057]

Este o încântare sa te privesc. Magic! Super scule!

[@Lasse.haertl]

right ear sound, SOOOO NICE

[@mornevanderwatt7965]

That's a clean Garage ... I like it

[@Jigdoeslife]

the new motor sprocket one looked better but it meshed so much nicer

[@Panzerbaer100]

Absoluter Werbefilm...😮

[@dumpsterfire6351]

All that hardware in one bucket 😂 have a good time dude

[@kockefar]

Where did you buy the battery?

[@tyronbamping6104]

Lov the way you work man. All in order!

[@victorgutierrez8669]

Que buenos videos amigo!!!! Felicitaciones!!!

[@ИванА-в9б]

Вот это отличная работа! Карт получился огонь!

[@TechyRodsWire]

I’d like to see updated video dual motors lol that be sick

[@cliftoncordell7201]

Sweet tool setup

[@thasanmahalingam8197]

Wow gut gemacht bro 👍

[@thasanmahalingam8197]

Dankeschön meine liebe Angel😘👰💞🤗

[@LuigisDesign]

Nice job!🎉

[@jb-fh2og]

whatttt!!!!!!! i watched this video, great build. but you gotta drive it like you have a liscense, because it doesnt look like you do

[@ΛευτερηςΣπυρελλης]

ΤΕΛΙΟ ΜΠΡΑΒΟ ΘΑ ΓΙΝΗΣ ΠΟΛΥ ΚΑΛΟΣ ΜΑΣΤΟΡΑΣ

[@TexasNEV]

Those are great little motors. I did an exhaustive video series on these as well. Nice job!

[@andymuzzo8568]

Sweet build man.

[@Timxela]

sieht gut aus

[@larryperdue508]

You need a pressurewasher and a ultrasonic parts cleaner 😊don't forget the sandblaster 🎉

[@miguelangelvalderrama1808]

Very beautiful kart 😲😲😲😲😲.

[@Drxxx]

odlican kanal, svaka cast!

[@filipr732]

Great job, great performance. Subscribed...

[@Daviddingman-mn8vs]

Nice video mate👍👍👍👍

[@Macim-u6x]

Wow! You did it beautifully!! Can you please tell me what motor you used?😅

[@orlandocamargoneto4439]

Parabéns 👏 que limpeza e organização

[@giveitatryguy6784]

Excellent!!!! Clean workmanship professional job and drives very well I will subscribe good video

[@ceyhunceyhan3633]

Everything is perfect. : )

[@UncleUrgant]

it is better, what i seen in start 2023

[@ufukbozkurt6409]

Nice job 👌👏👏

[@MrDKDIY]

Nice video bro

[@DShomemade]

❤❤❤

[@timbang9231]

You should make and sell a course on how to do this, u will make banks. I would definitely buy the course.

[@flobrka]

Bravo Majstore pratim od pocetka,nebrem verovati jos ve do kud si dosel a lefko bi rekel prek noci Svaka Čast ima nade za dobre projekte samo gass!! Evo i moje price ako kog zanima popratite 😋🇭🇷👌

[@shahaan-shah]

This is incredible! Great stuff

[@pancudowny]

Okay... now how about a list of links to the supplier of the parts used in this build, so we--the audience--can build something of our own powered by this combination?😕

[@VIGGZEN14]

What’s the the top speed

[@Justin-e6h]

Great job please pit a protective body shell on it to protect your work

[@k1ortia]

All that amazing craftsmanship, to be let down by a puny motor.

[@VeydinZain]

Glad I landed on your cannel! Awesome Job and j00 got some talent! Keep doin what u do! LOL ... I did the same with the paint remover, does wonders but what a mess!

[@ilhommuhammadiyv7591]

Wow. Well 👌

[@vandinh2585]

Wow videos very gôd👍🙏

[@verbonloucks6498]

This is not about changing to electric, its about making. A place for ads for the tool company!

[@manicmods]

Love this! Did similar build on eATV but the mishaps and delays leveled me! I finally replaced motor kit and back in action. How did your build hold up, kart is next on my list 😃

[@john_deere_185_hydro3]

When are you doing more with the garden tractor?

[@PrivKc]

Bro made his own Segway 😂😳

[@AspenNguyen]

Loved everything except for the wire management and the fact that you soldered into the battery terminals instead of just getting a compatible connector, which would make it removable and able to be charged easier.

[@Fanatic1704]

and where are FUSEs? Imagine any accident, it will explode like a bomb

[@MrRestoration9999]

Absolutely great video! Leaving a like!

[@alfreny2901]

Good Job! for more speed (80-90 kmh) you need a bigger motor plate...

[@luisfernandocaetano1]

Sensacional mais uma vez 🇧🇷🇧🇷

[@michaelstump6933]

You'll want about 15,000 watts for this type of project

[@luupski]

So you make everything look nice, but yet you do a terrible wiring job. ‘Why’ is the thing that comes to mind ?

[@olli.]

Hey mate, great video! I converted a kart into an electric one myself too, but my reverse and 3 gear switch doesn’t work properly. Do you have any sort of wiring manual? I switched the direction of the motor running (because of building reasons), could this be an issue with the functions not working?

[@cikatomo3092]

I can't pinpoint what tool brand you like the most.

[@DavLiKas]

very nice

[@matteopirone3099]

Ottimo lavoro direi

[@paucarneado487]

Great video, can you explain how did you manage to get the chain always at perfect tension?

[@AidenRisk]

I can explain: karts have adjustable engine mounts, they can be moved forward and backwards on the chassis thus controlling the tension of the chain, he made a new motor support with the existing mounts so the chain can be adjusted like a regular kart.

[@billypoe3703]

You could at a heatsink to the motor.

[@normellow]

Use a 6” diameter forklift motor. Get rid of the riff raff .

[@Kevin.OBrien44]

That’s what I have lol

[@normellow]

@@Kevin.OBrien44 , yea you did it right and you used a good size. I have one that’s about 4 inches longer than the one you have and it’s a beast. I was going to run mine at 123vdc off a Curtis controller. But unfortunately I never finished it. If you want to run your motor at higher voltage. You can advance your brushes. Anyway nice care chief!

[@Kevin.OBrien44]

@@normellow yeah mines 80v and it’s kinda too low

[@normellow]

@@Kevin.OBrien44 Coat the entire brush holder in heavy varnish to prevent plasma arcs ! Once you get over 90vdc , you’ll notice your wrist watch will become slower. That’s because your bending the space time continuum!

[@Kevin.OBrien44]

@@normellow lol yeah idk if I’ll upgrade my kart or just build a whole new one in a few years probably an ac system

[@nathenboswell9760]

Any why you could Gadd the links the electric kit you used on the go kart? Been wanting to do this but don’t know what kit to get

[@fernandopinco6752]

Excelente, puedes enviar las caracteristicas tecnicas y las piezas que se necesitan para armar un gokart?

[@abdc8006]

Nice build👍 btw may you describe about that tyre and rim? thanks

[@danw1955]

Seems odd to have a one hour infomercial for a Slovenian tool company posing as a 'build' video, but whatever...🤷‍♂

[@curtokio1]

I didn't see you spray oil on your brake rotor did I? 😬 Right around 39:48.

[@anton.r2103]

Nice work ! But somethinks i do not understand XD Using the corect tool for removing the bearings and u use no tool but them corectly in ?

[@hanimt2946]

How do you know how many percent of battery you have left? maybe fix a Battery Capacity Meter?🔋 But otherwise it turned out really nice. good work!! 😉👍

[@ngarmy6602]

Super videi ❤️💪👏👋🙏

[@Damian-v3h7o]

Try drillin holes in the motor so that it cools and install a fan to cool it. I have had a motor kit like this and it smoked after running for 20 minutes

[@austinluker]

did you get a refund? im thinking about buying one

[@Damian-v3h7o]

@@austinluker Yes, I've got 150 dollar refund, as I requested. The motor was fine, but my load was too big and the motor overheated. I installed it on a bike and the gear ratio was 1:4 so it should have been like 1:10 or even more to reduce heating

[@Damian-v3h7o]

I've bought the same motor and drilled holes and installed a fan and now it holds very well, it reaches 45 degrees Celsius after a 1 hour run

[@austinluker]

@@Damian-v3h7o do you have some other way i can message you? i have a few questions about a project im starting if u dont mind me asking

[@mrelnek]

i used a coper pipe around the motor and runed water thru it so it will be cold

[@lukebullock6537]

link in description for the parts you used. electric motor, speed controller etc ?

[@pyroheimwerker2730]

Use a QS 138 90H Motor. This is lots of Power

[@robertsnyder7203]

Cool Build but very slow and not enough battery range - I endurance race a KA100 and we are hitting 85mph on some of the road race courses and the races last from 45 minutes. Very nice build.

[@LeoDDJ]

The amount advertisement is a bit on the nose, don't you think? Really distracts from the amazing project after the 20th time ^^"

[@plethman3669]

Speed is about right for an 8 year old. As is it would not be that much fun for me.

[@ashik712]

Where did you buy this battry

[@hellangel28]

switching left and right audio channels the whole time, having music on one and the actual sound on the other, is quite annoying if you have a headset on... besides that, great video

[@novax4me]

First time I ever saw anyone wash off a go-cart with a paintbrush...

[@renter2572]

You should put dynamos in the wheel rims

[@BarryMillward-v7n]

Hey great conversion 👍 love how thorough you are ! Looks amazing. I’ve built a crazy cooler with the same motor , battery size all 72volt . 20000mah and run time is very poor . What run time were you getting ? Have a volt meter and cuts out on 72 volts. Charges to 83 volts . Probably get around 2 miles at 20mph mid speed (things rapid lol) desperate for advice if you can help ? Thanks

[@suraaj9481]

did you fix it?

[@CrashCarDave]

i wonder what tools were used? i dont think it was mentioned at all 🤣🤣🤣🤣

[@mikasjoman]

I noticed that my 72v motor lacks the fan inside seen in many videos. Do you have issues with over heating destroying the motor? I'm mounting a fan below and drilling the holes up in order to at least get some airflow. What have you done?

[@antitouchable]

You need more than eye protection when dealing with death wheels. Luckily you aren't a fool who takes the shield off.

[@paucarneado487]

Link for the electric motor please

[@РазвинДмитрий]

Китайский кит набор 3000w 72v. Контроллер можно сразу на мусорку отнести, 30 минут езды и двигатель огненный, руку не удержать. Сам мотор еще куда ни шло, но крепление ведущей звезды крайне не надежное, держится на двух фасках на валу. Учитывая из какой сыромятины сделан вал, жить ему полгода максимум. Цена такого набора на али не больше 150 баксов. Нормальный выносной мотор аналогичной мощности стоит 300 долларов + качественный контроллер 180 долларов, + батарея 72v хотя бы 20Ач это 200 долларов. Итого 700 долларов. Цена не убитого мото мотора 0.5 литра, с которым эта тарантайка поедет куда интересней.

[@domenicozagari2443]

Petrol is better than de greaser. If you heat the paint it comes like glass.