DSPIAE are a Chinese manufacturer. The Eu distributor is Breveco. They also make an awesome circle cutter which is great for cutting masks and some really nice quality cutting mats as well as a top quality anodised aluminium tool holder and a high quality pin vise / hand drill (mentioned below) that suits the standard PCB drill bits.
@barrythornton99476 жыл бұрын
For me , if you have to cut `away from the piece` , with £20 sprue cutters , and then clean up with Xacto blade and file ...... you may as well of used `Poundland` cutters , as the expensive ones gave you nothing.
@brucesharpe10796 жыл бұрын
These look brilliant cutters I will have to get a pair mine are just an average pair of cutters good video thanks Bob
@Flip5ide4 ай бұрын
They look exactly the same as the Meng nipper, did Dspie buy them out? Box and tool and pouch is exactly the same
@lasercreation-world19816 жыл бұрын
Thank you very much for the video, as always done great👍✌
@thewuf6 жыл бұрын
Just got a set and the pin vise and they are top shelf!
@AlfonsoTheTraitor6 жыл бұрын
Do they sell replacement drills and if so are they sold single or do you need to get a new set?
@alexb13406 жыл бұрын
The drills are PCB drills, readily available from many vendors on eBay... Can get sets with sizes varying by 0.1mm from 0.3mm up to 3mm. Normally 10 drills in a set. prices vary but can get from as little as the equivalent of £2.50 for 10 inc P&P if you shop around. They are ALL delicate though in the small sizes so use with care. They are standard shank sizes so fit the DSPIAE handle..
@AlfonsoTheTraitor6 жыл бұрын
Thank you very much for the info I appreciate it a lot.
@gtziaf6 жыл бұрын
Nice review... May forgot to say about the adjustment screw and how it is works, but anyway very informal. Also a question. Can cut metal or brass rods with this. If you work with multimedia kits, like MFH, you definitely wants this option. Thanks for your time.
@feathersareheavierthansteel5 жыл бұрын
I'll order these for the PG RX-93 that's coming out later this year.
@Audiodump5 жыл бұрын
But how do they compare to godhands?
@Nicks3D-dimension6 жыл бұрын
I need a pair of these! Great review
@Kammmm6 жыл бұрын
Nice one Bobbt. Great review thank you
@nathanlee37484 жыл бұрын
How do these compare to Godhand nippers?
@genessismodels4 жыл бұрын
will have to get some godhands mate :-)
@hugosoarespt85536 жыл бұрын
É a 1ªvez que vejo corte de alta qualidade, muito bom.
@sergiogamboa64726 жыл бұрын
Una herramienta excelente ...vale la pena ...gracias
@andreamorris81326 жыл бұрын
Where do you get these from?
@richardperry216 жыл бұрын
Ordered this nipper 4 weeks ago still not showed up...ebay
@jimareas5 жыл бұрын
I bought it but for the price they ask it doesn't worth it. It doesn't give a clean close cut unfortunately. I've tried loads of cutters so far the only close like shave cut that you don't even need to clean afterwards is the Tamiya sharp pointed cutters the 74123. For me that's the best so far. The only one I haven't tried yet is the ridiculous priced gods hand but a friend that he is great modeler and try it he said he prefers the Tamiya one cos even the gods hand doesn't do a shave on the plastic edge. I do trust his judgment.
@SergioCeccherini3 жыл бұрын
Don't buy unless from a shop! I went through the official internet store which sells through AliExpress. I created an account, and paid the sum required. The money has been taken from my card, but I never received a confirmation of my order. My account has also disappeared. Aliexpress has an "account retrieval" service where you put in the some of the digits of your credit card and the price you paid. I tried it, and it says that my credit card has never been used on their site. My bank statement says otherwise. I should have know better than to deal with the Chinese, but you have been advised.
@AlfonsoTheTraitor6 жыл бұрын
I thank you but my wallet hates you. All kidding aside I will be getting a pair of these thank you for sharing.
@RiksModellbau6 жыл бұрын
It's a nice tool :-)
@danielebling6 жыл бұрын
I would we if they are better then the God hands . I find the God hands blades are really fragile
@lasercreation-world19816 жыл бұрын
yes his videos are just great👍✌
@bryan705465 жыл бұрын
God hands are great till you drop um on the floor and the blade breaks.
@fcolon19765 жыл бұрын
You still have to sand the parts down with or without that expensive cutter, sooo what's the point?! Nope I'll pass
@robertbarker26726 жыл бұрын
Wow are those cutters the same as hand of God, they work awesome need them need them need them lol ok..please show the net address again
@danielebling6 жыл бұрын
Robert Barker I've cut a spur with a pair of God hand and the blade snapped
@ytwos16 жыл бұрын
God hand cutters are different, they have a hammer and anvil approach (one arm is thick, the other thin) and it slices towards the anvil, these cutters have two slicers and they slice towards eachother. More like the Tamiya Sharp pointed side cutter, but even thinner, sharper.
@robertbarker26726 жыл бұрын
Thanks for the reply I see what you mean
@MichaelKerney6 жыл бұрын
No, these are single blade with a flat-top cutting surface as well. If the cross-section in the instructions goes by too fast in the video, check dspiae.com and take a close look at the package. The bottom blade is angled, but still flat on the top.
@dsleong83284 жыл бұрын
@@ytwos1 Ermm no, you getting the concept wrong friend, both nipper arm is the same thickness, just that one side is dull and another is sharp, that's what a single edge nipper is