DSTV NO SIGNAL PROBLEM, HOW TO SOLVE IT STEP BY STEP - Rofixtech

[@viviankennedy7495]

Was helpful. Thank you

[@rofixtech-bonifacenebo5498]

Thanks Vivian for your message. I am happy to hear that from you.

[@DanielJames-hm7qb]

So which position should the dish face coz my dstv doesn't want to find signal

[@rofixtech-bonifacenebo5498]

Hi James, Your DStv dish should face East. Then slowly move the Azimuth and the Elevation until you get the signal. Thanks.

[@segunadeniran3951]

So, what if I don't have meter?.. I'm having same problems and some channels are skipping

[@rofixtech-bonifacenebo5498]

Hi Segun, Working satellite with the meter is the best thing you can do to help yourself otherwise you will stay in tracking one satellite signals for days with wondering eyes.

[@Adebisioluwaseun-kb3ro]

My secondary decoder displays E48 while the primary decoder it’s fine,but noticed that the secondary decoder signal street is on 1 vey low,pls advise

[@rofixtech-bonifacenebo5498]

Hi Adebisi, Thanks for reaching out to me. Just check the connection running from the dish to the secondary decoder, including the F-Connector to ensure they are all in other.

[@princehenry6125]

i’ve change the LNB but it’s still no working. what could be the cause?

[@rofixtech-bonifacenebo5498]

Hi Prince. Kindly use a satellite finder to check the signal strength and quality of your DStv dish outside. It might have been shifted away from the signal point.

[@modupeolalere8500]

​@@rofixtech-bonifacenebo5498how do 1 get d meter swirch

[@DestinyAtokpe]

Please, my dstv is showing no signal, but the dish is still I'm tack

[@rofixtech-bonifacenebo5498]

Check if the dish signals is ok with a satellite finder. Also, check if there is any place where the wire was joined for a possible rust so you can correct it.

[@v.b.2868]

Mine is showing me 1% as my signal strength and quality please what can I do

[@rofixtech-bonifacenebo5498]

Kindly work on the dish with a satellite finder so as to increase the signal strength and quality then the whole channels will come up.

[@tommytee8944]

Please mine is showing only the channel 100 and others keep saying no signal What do I do

[@rofixtech-bonifacenebo5498]

Hi Tommy, You need to work on the signal strength and quality of your DStv so that other channels can start working fine. Thanks.

[@SiliasTlou5]

My dstv other channels are reported no signal on screen and can show other channels please help

[@rofixtech-bonifacenebo5498]

Hi Silas, It means that the signal strength and quality of your DStv dish has reduced. So, use your satellite finder to reset the signal to a very high signal levels so that other channels will start showing. Thanks.

[@SiliasTlou5]

@@rofixtech-bonifacenebo5498 so where I must get assistance

[@IncognitoTS]

Well unfortunately this wasn't helpful because there was no straight forward points to learn how to resolve the signal issue, it was more of you showing that you can do the job. The typical Joe doesn't have that device, should one try to skew the LNB and actually showcase on that, or if possible realigning of the dish is needed and how to do that and avoiding long winded conversations that are out of what the actual title of the video states

[@rofixtech-bonifacenebo5498]

Hi Wanda, You can watch other videos in my channel to get more insight on how to track satellite signals.

[@azeezmuheez4616]

Our Dstv saying no signal and on -1% on the tuner status.

[@rofixtech-bonifacenebo5498]

Hi Azeez, I have messaged you already. Kindly check your messages and act accordingly so you can get your signals back. Thanks.

[@gabrieldennis708]

Help too, I’m facing same problem

[@noelobaseki2808]

​@@rofixtech-bonifacenebo5498boss talk am for here. Other ppl dey face the same problem too which one be dm

[@pholemofokeng2242]

.5🎉

[@sinazotom357]

Same problem please help

[@gideonmutuku9898]

it tells me installation wizard

[@rofixtech-bonifacenebo5498]

Ok, Follow the step by step guidelines in my DStv full installation tutorial to get your signals and pictures back. Thanks for reaching out to me.

[@mwemezidickson7908]

You talk too much...

[@rofixtech-bonifacenebo5498]

Ok sir, I was only trying to drive some points. However, I have noted your observation. Thanks.