Dyno Tuning a BTR Stage 3 LS3 Camaro on E85 + FPCM Tuning

[@bubah5723]

Thanks again for another great video, I would love a gen 3 flame throwing video for 2 step tuning, just for funzys, 😊

[@Lunatikgixxer]

Man GMs are so simple to tune. Nice vid.

[@SpeedDemonCBR]

I went with 60 pound injectors with a ZL1 fuel pump for my LS3 running e85

[@fasnuf]

How are you dealing with Rich after Reflash issue?. ITT has to be stableized to 122°F before I can do a log and heat soak is a big issue

[@jdcustomz]

Don't forget that valve temperatures should be below 178 degrees Fahrenheit, which will also cause similar issues. Usually, after a flash, you will see 19X degrees Fahrenheit.

[@LynnTwinCustoms513]

Another good informative video!

[@LoneWolfSnowplowing]

Thank you for this.

[@lsxjunkie]

Nice video man as always. Didn’t know voltage adjustments like this were possible. So in tuning in open loop like this is PE engaged?

[@Matt_Sanford]

PE comes in as soon as the threshold to active PE is met.

[@lsxjunkie]

@@Matt_Sanford duh I should have thought before I commented. PE is open loop. Lol big dummie sometimes. Looking forward for more man.

[@LynnTwinCustoms513]

Much appreciated!

[@jimmyfreeze3782]

Percent added to maf/ve after each pull?

[@700chavo]

My brother hand me down his 15 v6 camaro last year on my 18th birthday and have always loved the 5th gen camaros and man do I want to build a ls3 1le to 700hp. I have the funds for the mods just need to find the car to finance it but what’s killing me is the weight of the car and the manual transmission knowing most automatics are beating any manual cars unless your high on hp or very light on weight. The bmw with b58s are running the racing scene right now for overall roll racing and digs, makes me wanna second guess my self in buying a v8 Camaro but I can’t get over the raw v8 sound being cammed. Hard decision. What would you do if where in my position?

[@H111-y8f]

I am chevy owner i have boosted build engine corvette C7 and stroked L83 single turbo sierra but i will go with B58

[@harrybronson8352]

Nice video. Your driver side 02 sensor is dead, that’s why the stft is always returning to the same thing 😊

[@matthewmuniz2442]

Do you have any vids on how to make the car pop like that for a gen lv ls ? I have a 2010 Camaro ss l99 with headers and tsp cam, i disabled dfco but can't get it to pop like that.

[@SB-qw8bz]

you need to remove -10 on the spark adv high oct and go to base min and -10 there too, don't go lower than 0.16 on the spark table

[@pcmfrenzy1089]

You should do a snap and crackle tune video on Gen 3,4,5 Be a good @ desk video lol.

[@txfperformancetuning]

Bank 1 sensor 1 no bueno