Doing some dyno runs on these awesome pipes made by Morgan, from wild west garage. Here is a link to his channel. • UFOs Sighted in BC For more product or porting info visit my website worksaws.com
Пікірлер: 310
@1d1hamby Жыл бұрын
RIP Jed Walters. 🙏
@fabzacres-blackcat Жыл бұрын
Jed or “JEDI” as I referred to him was a good man. I sent him some chains awhile back and he handfiled them sqr/sqr Jed style - sent them back to me with a file too! I had some good convo with him but never had the pleasure of meeting him in person … there’s a go fund me on guiltily of treason channel to help the wife and children he leaves behind …. RIP JEDI
@mmg6282 Жыл бұрын
Very tragic. He seemed like a very nice Man.
@hardcoreplayafromthehimala4888 Жыл бұрын
Who is he?
@JDESTR0Y Жыл бұрын
@@hardcoreplayafromthehimala4888 watch Jacob rogers videos /guilty of treeson he was good buddys with Jed and worked with him
@JDESTR0Y Жыл бұрын
Rest in peace Jed
@TurboDog73TX Жыл бұрын
I'm so pleased to see that they DID actually make more power than just a gutted can, and the craftsmanship alone is worth the price of admission if they ever become available. Works of art indeed. It would really be a fun experiment to alter the dimensions, and diameters to see if the same design could be tweaked to raise the power peaks even higher. Great work Morgan!
@jonathanhoekstra6174 Жыл бұрын
I agree!
@fabzacres-blackcat Жыл бұрын
@Gearhead modded can with deflectors , piped modded can will not equal these style pipes - I’ve tested my version of the Bearclaw muffler against a stock can , dual port can , piped can and they ALL LOSE
@Super-Dave-Outdoors Жыл бұрын
Ufo pipe is slick. Pretty interesting to see the power characteristics change that much with a pipe that only occupies factory exhaust space.
@wayneanderson991 Жыл бұрын
Nice gains from a bolt on pipe! I think this would be a great addition to enhance a ported saw. Thanks for the testing Joe! Nice work Morgan!
@diegovd7215 Жыл бұрын
Congratulations on 10k+. Thank you for doing this test. "If you can't measure it, you can't improve it" is the motto in many places. Well done Morgan!
@dynojoemods2764 Жыл бұрын
Thank you!
@srankin8022 Жыл бұрын
Would love to see the factory muffler opened up and compared to these three. You have to be careful running pipes that dump out the front. In big timber about two thirds of the way through the log it can block the exhaust and lean your saw right out. Ask me how I known. lol Took me a few cuts to figure out what was going on, because I had just built the saw I kept thinking something was wrong with the saw itself. Thanks Joe for a great video great work on the pipes Morgan.
@rakersdownnz Жыл бұрын
Beautiful pipes, glad to see a significant gain on both, as cool as the enterprise looks I have personally always liked the look of the UFO best, don't know why, just do. As stated in other comments would be good to see how these percentage gains stack up against an opened up stock pipe, key to the bush etc. Thanks for your time Joe, always, always appreciated.
@Bigcheif360 Жыл бұрын
In my opinion 1/2 hp gain with chainsaw bling it’s definitely a win win. I think Morgan is onto something there with those sleek custom pipes. Could he be an innovator in the next big chainsaw thing?
@kennydillon7635 Жыл бұрын
Absolutely beautiful craftsmanship! As well as the Ram Horn pipe that Bucking runs on his saws there's a lot of effort that goes into producing and perfecting a muffler such as these. Great Work Morgan!!! They may not be for everyone, but they do perform and have proven that on the dyno, thanks Joe for producing this video and showing off the work of a master metal crafter.
@tome.joyner887 Жыл бұрын
I knew that Morgan had built more than artwork. Great job my friend and thank you Dyno Joe for testing them!
@bmp0149 Жыл бұрын
The value of having a dyno.... it dont have an opinion just tells it like it is. Thanks for bringing the results to us, it just stops all the chit-chat stone dead.
@jdsolberg7613 Жыл бұрын
It looks like the un-modded muffler performed better at wide open throttle (WOT). When cutting wood, I've got the throttle at WOT 80% or more of the time. Plus, if you're thinking they may interfere with the safety bar or the wood being cut, I think I'd just keep my Stihl, stock. Form follows function, in my opinion.
@walkerscountrylife Жыл бұрын
Great work Morgan & Joe. Can't wait to get my hands on one for my little channel. RIP Jed.
@OpenAirAdventure Жыл бұрын
I was hoping the ufo would improve hp over the others, also wondering if modded stock pipe would increase hp. Morgan is a genius. Thanks Dyno Joe.
@frankz1125 Жыл бұрын
Real numbers are great to see. Thanks Joe. I would have never guessed a half horse increase. Cheers
@tomnielsen6439 Жыл бұрын
Defiantly a work of art. I use to weld for a living and took pride in my work. Those are beautifully done. There is some thought and time in those.
@freddy7700 Жыл бұрын
Amazing that an exhaust the size of the stock exhaust gives 10% more power. Thanx a bunch Joe.
@mattlynch2823 Жыл бұрын
Props to Morgan! I built the iron horse pipe for my 372 x torque last year and buckin's key to the Bush for my 385 and to see the amazing craftsmanship in these 2 pipes is awesome! It's not easy to build a pipe that nice that makes good gains! I hope Morgan will decide to market them! Great work!
@dentondunn4346 Жыл бұрын
I'd buy one for my 372xp
@stevessaws3612 Жыл бұрын
I agree. I was in a large power tool shop this morning and was told by an employee (sadly) in Victoria, Australia, alot of councils, Vic Roads and utility maintenance government bodies are no longer using petrol powered tools. They have to use battery power.
@chrisroberts500 Жыл бұрын
@@dentondunn4346 I would as well
@paulgreco2188 Жыл бұрын
Pretty awesome to see that u sent these away. I am not surprised that they work very well...significant gains. Great work.
@richevy5224 Жыл бұрын
Interesting results Joe. I'd be curious to see a run with one of your muffler modded deflectors on the same saw. See how he traditional muffler mod does on Dyno.
@TractorTech Жыл бұрын
Me too.
@gravytrainoutdoors Жыл бұрын
That’s really cool that you got a couple of Morgan’s pipes to test out. He lives about 40 mins away from me. The guy is one heck of a metalworker.
@user-ou8nx6vo7z Жыл бұрын
Can't wait to see mogans mini expansion chamber on the dyno he does beautiful work
@joehackett9471 Жыл бұрын
I love these pipes espesially the UFO, after seeing the dyno runs I want one even more! Great video! Great work Morgan!
@davidrasmussen2975 Жыл бұрын
Enterprise dual outlet is lower temp on the side where cooling air comes from. Doesn’t mean internal air flow is uneven based on color alone.
@Chuckrussell75 Жыл бұрын
I like both Morgan's pipes, but definitely like the UFO pipe the best. I just cut firewood, but would love a cool pipe lke that. Morgan's a helluva' tin knocker, & from the looks of his work, understands the dynamics of expansion chambers, & exhaust theories. Thanks Joseph.
@SCouch-cw6je Жыл бұрын
As I get older I like the quieter sounds!! I like the stock pipe with added port myself
@gutrali Жыл бұрын
I was looking for this comment..... Chainsaws are so loud and annoying to begin with, I can't imagine someone he uses it every day would want it to be even louder. Stock all the way!! I wish people would make pipes that are quieter AND more powerful. I don't even want to know the price of these shown, that make them louder.... I'm sure it's insane. Kind of reminds me of the kids that like putting $400 titanium fart cannons on their Civics, and think it sounds and looks good 🤣
@SCouch-cw6je Жыл бұрын
@@gutrali agree!! I do residential tree work so I want to keep the noise down. I do modify my own saws. I just take a step bit into the can and weld or braze the appropriate size pipe. I’ve used metal broom handles, curtain rods all kinds of things. Depending on the angle and how much is inside can will determine the loudness in my experience. I try to angle it down away from exhaust port and 1.5-2 inches inside and 1-1.5 on the stick out on outside. They work well for my likings. My coworkers and saws I’ve built the operator seems to be happy. Had a friend straight shot a 562 muffler and it was so obnoxiously loud and sounded horrible
@gutrali Жыл бұрын
@@SCouch-cw6je I guess we should let these boys have their loud fun before our country eventually forces everyone to go electric anyway lol. I love my husq 440
@SCouch-cw6je Жыл бұрын
@@gutrali I run 3 series, 346,359,365sp and 372’s. The 3 series are my favorite series of any husqvarna series I’ve ncluding the 5’s
@scottwilson4396 Жыл бұрын
Morgan makes metal look and sound awesome ❤
@tdawg8605 Жыл бұрын
Nice to see the actual numbers of these mufflers. The dyno certainly proves the theory of increasing the performance of a saw as the number don't lie. I would imagine the results in the wood would be similar if not a slight improvement when the saw is under a natural load, doing what it was designed to do. Just due to the fact that it can exhaust the air swifter in grunt mode, so to speak. If the price is right I would go for one of each for sure to experiment on my saws. (268xp & 272xp). Would be interesting to see the "Ram Horn & The Ironhorse" on the dyno as well and compare them all "Amano Amano". Thanks Dyno Joe and Morgan for this great experiment and now proof of concept.
@AndyH-13 Жыл бұрын
Great video with proven results. I would have one of the these pipes just for the looks and sound, and the 11.5% improvement is a bonus.
@snowysnobdds7842 Жыл бұрын
Nice work from Morgan. The dyno is the arbiter of truth. They work.
@bronkourness7289 Жыл бұрын
Wow. Enterprise, Dual outlet is my fav. Morgan did a beautiful job on those. Killer sound! Can’t wait to get my hands on one!
@joutdoorsmen23 Жыл бұрын
Congratulations on 10K+ Joe, and Morgan pipes are cool
@Andyshine77 Жыл бұрын
Good deal. I'd really like to see how a stock modded muffler with a deflector would do. 😉
@jonathanhensley8685 Жыл бұрын
Great work, Morgan and Joe. I would love to see a dino run with the factory muffler modded.
@OpenAirAdventure Жыл бұрын
Just thinking the same
@darrellpeak2914 Жыл бұрын
Yes, add an exhaust port to the factory gutted muffler and see what the gains are.
@bcdog1994 Жыл бұрын
Have been waiting for these results since Morgan mentioned sending them this direction. I truly enjoy seeing the all of the dyno results and hope to see videos continue in the future. Nice job on the pipes Morgan. How about a few for the stihls as well.
@wednesdar452 Жыл бұрын
Very cool. Thank you for taking the time to test these!!
@BuckinBillyRaySmith Жыл бұрын
good stuff , pretty much what the wood told me, thx for takin' this on Joseph
@sethwolpert1391 Жыл бұрын
Thanks for the video and testing Morgan’s pipes
@maxgood42 Жыл бұрын
So I paused the video to make this comment before knowing the results, I was sure the UFO pipe would be a winner for power, and the Enterprise pipe would make an interesting sound.
@maxgood42 Жыл бұрын
Ok I wasn't sure if the Enterprise would be so close to the UFO, but hay look at that. If the the guy who makes these went into prodution and sold them on Etsy I think he would do really well.
@dustinadams9136 Жыл бұрын
Very nice pieces, glad to see the numbers. Sure hope he starts to sell them!
@christopherandkathrynmorro9357 Жыл бұрын
Great video Joe. It’s always nice to see the numbers you have a leg up in my opinion because you can do that. I like the enterprise looks but your point on needing a brace makes sense. Keep on rolling love the channel.
@jonathanhoekstra6174 Жыл бұрын
Both are beautiful, like you said art. Really like the UFO. Was surprised by how close all three were in the higher RPM range.
@RP-fp5bh4 ай бұрын
Thanks for the testing and showing us the results. I would like to have a ported designed use a on my 550xp for bucking and smaller work
@aaronpowell4885 Жыл бұрын
Thank you Joe for testing these pipes for Morgan! He does some incredible work👍🏻 tho I don't currently own a saw those would fit on without modification, it would be awesome at some point in time to own one!
@nseric1233 Жыл бұрын
I made a similar comment on buckins video on these. The pipes are a bit too big, if they were 25% smaller they'd run better and be snappier. They're basically smaller can mufflers with giant outlets, if the outlet was equal to about a one inch pipe they'd be better. If Morgan is ok with it, weld up the outlet making it close to one inch square total, I bet it makes more power and has better response.
@steelcityperformancesaws Жыл бұрын
great video I figured we would see these sorta results across the board. I'm lucky enough to have the enterprise pipe and i love it
@timnevitt2993 Жыл бұрын
i dont even have a chain saw but that ufo sounded awesome
@echoglen8649 Жыл бұрын
The creativity and design is great! 🤙🏼😎
@novicelumberjack Жыл бұрын
Excellent build quality. I like the way the Enterprise looks...a lot. I haven't gotten to the numbers yet, but my guess is that there will be no discernible difference between the two pipes, and I'm hoping you compare them to a regular modified can, although I understand if you don't.
@lumbearjack1439 Жыл бұрын
Yea, I think a regular high flow modded can will be right there with em, or close
@dynojoemods2764 Жыл бұрын
They were very very close. And a normal modified can is usually worth 5-8%
@reillystsb Жыл бұрын
I'd like to see the stock muffler with a dual outlet...... the other 2 pipes are Works of art..🐚
@dankrzeminski6370 Жыл бұрын
Jetting needs played with now. Thanks for your hard work
@mattkrumm8141 Жыл бұрын
my buddies and I ran Walkerized saws 20 years ago. This was a ported exhaust with dual outlets.
@meskalin643 күн бұрын
I think they look awesome. Im gonna get a weld and create some new ones myself.
@mikegamba580 Жыл бұрын
Motorized bicycle engine builders are going to be asking for these especially the guys running chainsaw top ends. Those pipes look beautiful but boy they sound mean absolutely love it
@ls2005019227 Жыл бұрын
Really enjoy seeing mods tested in this way. Thanks!
@matticus6339 Жыл бұрын
Beautiful pipes and even more so once they blued from the heat, added power is nice to and making a more usable power range.
@cowshottv5867 Жыл бұрын
Good way to pick up half a horse Joe, and they don't sound as annoying as a bark box on a 500I which sound horrible
@waynepedder2033 Жыл бұрын
Great workmanship
@jacobnelson9144 Жыл бұрын
Awesome pipes. A real craftsman.
@christinney9441 Жыл бұрын
Very cool to see how they perform.
@andyjones6361 Жыл бұрын
10% power gain is nothing to sneeze at. In my humble opinion the guy is on to something with the escalating pipe volume peaking out at the dome. It gives some space for expansion. Been thinking that way for awhile wondering if there was a configuration that would act like a tuned pipe
@sgg89707 ай бұрын
Love the 2nd one with double exit pipes. That sounded pretty tough. L8ke them all 4 sure!
@lamarbeachler7738 Жыл бұрын
I'd love a couple UFOs fire wood cutter
@deniseanderson7895 Жыл бұрын
Thanks for testing Morgan' s pipes, they look great
@paulmcreynolds1774 Жыл бұрын
Great job Joe. I've been waiting for this one. Awesome stuff.
@marcduclos9789 Жыл бұрын
I have followed the journey of these pipes. Wow 11%.
@DaveyBlue326 ай бұрын
The UFO is just the perfect amount of saw bling and the fact that it’s actually adding any additional power is huge bonus in my mind!!! That’s a fantastic looking piece of welding skills and I couldn’t get one together that clean without burning up a half dozen flapper wheels!! LMFFAO! I don’t know what exactly they are going to cost but I’m definitely curious!!!! Be the coolest mofo at the wood pile with that piece of saw bling on your rig!!!
@akliving5795 Жыл бұрын
Very nice, good to see these pipes are more than just good looking!
@230e4 Жыл бұрын
Nice job Morgan! True craftsmanship at it's finest. Definitely 2 of the nicest pipes I have seen. I really like the UFO pipe! It is hard to judge the outlet size in the video but I wonder if the outlet was smaller/ 80% of the exhaust port that it may have preformed even better on that saw. I like the outlet pointing straight forward vs out the side on a work saw, with nothing sticking out in front of the case. A screen option as well. They definitely need a support brace for a work saw as you mentioned. I would run one felling timber and cutting firewood. I have experienced the same results on dual outlet pipes with one side flowing more, so I favor the single outlet. I am testing a single port original 372xp muffler with a 3/4" I.D. pipe in place of the stock outlet vs dual port on a stock 372 x-torque muffler on of my stock 372 x-torque. It would be nice to see a run with different mods on the factory muffler. I have several of these saws with this muffler and would like to find what works best to run on all of them. I would definitely be interested in buying a UFO pipe with the above mentioned tweeks. Thanks for sharing Morgan and Joe.
@cathrineyuill8622 Жыл бұрын
Would have been interesting to measure the cylinder head temperature of each set up. Power gains are impressive but if it causes premature or excessive wear on the engine is it it worth it? Other than that...a very cool demonstration.
@HYDETREEWORKS Жыл бұрын
Getting closer to the design of a 2 stroke dirtbike exhaust. Seems to work great for them. Works off sound and supercharges as you know. I thought the ufo would work best due to length of exhaust travel.
@ragercrepair9301 Жыл бұрын
Man those look beautiful for some chainsaw pipes! But I'll bet they improve power and torque! I'm gonna say UFO lol
@mljantz Жыл бұрын
That's cool Joe. Nice work Morgan.
@dankurtzweil900 Жыл бұрын
Really need to follow up with dyno runs with modified mufflers on the same saw. One test with one added port and another test with two added ports. I'm guessing that those tests weren't done for a reason. I do realize that the type of person that wants these is going after a look rather than performance and the guy probably spent a ton of time building these pipes and did a good job making them look nice but if they don't outperform simple muffler mods people should know.
@ernestjoiner3040 Жыл бұрын
Nanu nanu!👽I knew that the UFO was going to be a winner!🛸
@JS-oy6nn Жыл бұрын
I think a properly modded dual port stock can should have been in the mix.? And idk about everyone else but weight is a major factor for me, would like to know the weight difference.? For me it’s a hard no, I appreciate the hard work that went into it but the practicality is not there. I’m pretty sure a properly modded stock can will do the same. Hopefully you’ll see this and try one.? Great video like always Joe 👍🏻
@fabzacres-blackcat Жыл бұрын
No … a modded dual port will NEVER equal these style pipes … I’ve tested them all in the timber , stock can vs dual port can vs piped can vs my version of the Bearclaw design which I call the Rowdy pipe and the piped exhaust is superior in every aspect. I can also produce them relatively inexpensively vs Morgan’s design which is far more labor intensive but gives a fuzz more gain. Mass producing pipeslike Morgan’s IS possible however I’d say I would have to charge $199+ for one vs $55-75 for my “simpler” design 😜
@IndianaDoug Жыл бұрын
Beam me up Scotty!😃 very cool👍🏻
@donnywalker4691 Жыл бұрын
Nice work morgan good video joe
@Scott_296 Жыл бұрын
Love the aesthetics of the dual outlet but I had a sneaking suspicion the other would do better.
@billyb.9878 Жыл бұрын
I know the OEM muffler for a 394 is $125.00. If the price for one those custom pipes is within my reach I'm going to order one. Reach is relative of course. Good job everybody involved. Later. 👍
@rileyjohnston8393 Жыл бұрын
Ya I like buying the farmertec ones to modify, I don’t trust a lot of their stuff but it’s just a sheet metal can anyways
@jakegorman7121 Жыл бұрын
I would have liked to seen them go up against an ironhorse style pipe and then the standard muffler mod.
@thebradleysoncatbirdhill6849 Жыл бұрын
Congratulations on hitting 10000! Well done! I couldn't wait for this video, and I am delighted with the results. Still undecided on whether or not they would be worth the price tag, as I am just a firewood cutter and where I cut, no one other than me can hear the saw, lol! So, no one to show off for☹️. The craftsmanship looks amazing!
@Xxxpertlofi Жыл бұрын
I want one so everyone on the Mountain knows who’s in charge!!!, 😂
@JohnBrunner-ym6qj4 ай бұрын
That ufo pipe sounds good on Video looks like Morgan did an amazing job personally I would love to have one if he ever sells them I’m a buyer
@andyjones6361 Жыл бұрын
My favorite is which ever one makes more power!
@sunbear1973 Жыл бұрын
Definitely better looking then that stock can and good to see that they produce more power. It would be good to see what the results would be on a ported saw.
@jameshumbob8247 Жыл бұрын
Morgan spent many hours on them, as with any custom pipe. Believe he did great and his newest will be even better
@christophersmithsonian3350 Жыл бұрын
Those pipes look great the Enterprise in the UFO I'd like to run those with blendzall castor oil
@mikemurphy2928 Жыл бұрын
I would love to see a comparison between a stock muffler and a stock muffler with a simple do at home muffler mod on a stock 372, just to see what improvement we can expect with a do it yourself mod for no cost. Awesome videos, thanks, Mike
@mikesenginesandadventures Жыл бұрын
I like the ufo pipe… it would look good on my Jonsered.
@scottrussell6717 Жыл бұрын
When I was building saws the muffler mod was the best part of doing a mod build
@stuartramage5933 Жыл бұрын
awesome video .very nice u guys workin together .nice pipes morgan .peace an love from scotland stu
@kowski9477 Жыл бұрын
You can hear it in the first pipe. I'd love to have one
@skrompf Жыл бұрын
Nice to see Morgans pipes on the dyno.C ool vid.
@Fogyt1212 ай бұрын
The different heating on the double exhaust could be caused by the flywheel that's blowing air on the pipe.
@robertwoerner20 Жыл бұрын
Awesome looking pipes, I bet they would show more with a ported saw compared to the stock can even more so. Looks like they have the ability to flow some air. I originally thought I liked the UFO more so, but really like the tone the enterprise pipe produced also. Gains were definitely there, hard to gain up high with a non tuned expansion chamber pipe. I would rock either one, I just do firewood. Would definitely show it on any chance I had .
@WildWestGarage Жыл бұрын
Thank you Joe.
@dynojoemods2764 Жыл бұрын
Very welcome
@jackpinesavageadventures3142 Жыл бұрын
Nice work Joe !!
@jackpinesavageadventures3142 Жыл бұрын
Now we know ….. Morgan is an artist !
@onthelake9554 Жыл бұрын
For me the ported stock is a better fit , I don't want the weight or the noise . For a comp saw though maybe .