E4OD 4R100 TRANS BRAKE VALVE BODY by COPE RACING TRANSMISSIONS

[@FarNorth12v]

I think I’ve seen you post on a couple 4r100 pages/fummins pages on FB… I’m going to be stoked to have this in my 24v ppump fummins. Finally get to ditch the US Quick Shift and go all manual! You are a genius

[@themacgyverinstitute5340]

Thinking is the hardest work you can do….. now it’s the fabrication and setting it up . I absolutely love the stand alone non computer reliance .

[@chrishorst6993]

This would be great. That means street driven can have overdrive and the ability to hold more power. Thank you for doing this. I wonder why no one else tried this until you figured it out

[@1959nickd]

very cool

[@bbkr7910]

Found your transmissions looking for a solution for my 360LA build and now may get to have a solution for my 460 BBF build. Thank you for all of your ingenuity and hard work!

[@bcbloc02]

Figuring it all out to make it how you want it will make for an awesome piece in the end.

[@BigBlock402]

Im excited to see this go into production. I have a 4R100 in my 2008 F150 and I have had it apart and back together twice. Its a great transmission and I love the way it shifts. The ability to have this all manual and with a brake is just unreal. I think this is a huge market just waiting to be fed. Thank you John for looking at this> I would run a 4R100 in multiple vehicles if possible. Coan Racing builds 9" converters for the C6 , Maybe they could do one for a E40D.. .Be worth asking

[@hankclingingsmith8707]

There is a market for what you are doing. Diesel guy like it to

[@kevinharrington4907]

The second you get these out I’m going to have one on order!! You would open up a huge market for 7.3 guys and even people who want to do a Cummins swap on their ford, I hear of people who have a hard time tuning the trans to work right with the Cummins swap, this would be the best thing instead! I’m excited!!

[@michaelcoger4626]

Have you checked with Allen Pope converters out of FL.

[@coperacingtrans]

I have not

[@SmithRacing623]

I am ready to buy one as soon as they are ready, reverse manual, trans brake not needed for me

[@adamsorell4851]

Not all worm passages are the same between early and late e40d and 4r100

[@UnfinishedProjectDartSport]

All of this voodoo, he’ll still be able to give an excellent description of JMJs taillights to a sketch artist 😂 🥔

[@coperacingtrans]

lmao

[@jesusisalive3227]

I want one for my 1970 f100! I'm putting an efi 460 in it and would love to use the tranny that's bolted to it (e4od) but I'd rather have a zf5. This would be the best of both worlds.

[@d.collier_8280]

This sounds like the perfect trans for my 400hp 85 F150 with a AOD trans.

[@craigchiddo2794]

Is there any way to get rid of the electronic control and keep it automatic or can you run a manual valve body on the street

[@redbeaver100]

The website says April 1st huh? I’d like to get my hopes up but seems a little fishy🤔

[@coperacingtrans]

Fishy how ?

[@redbeaver100]

@@coperacingtrans I’ll be waiting for someone to yell “April Fools!!” In all seriousness, I’d love to put one in my 7.3.

[@coperacingtrans]

@@redbeaver100 not a joke. Look at some of my videos

[@redbeaver100]

@@coperacingtrans Just went down the rabbit hole, looks awesome. Keep up the good work 👍🏻

[@droppedf100]

Very cool to see. I have one truck with an e4od and one with a c6.

[@DougsterWolverineGarage]

Cope! I got faith in you my brother! You can do it! 🥔🥔🥔🥔

[@coperacingtrans]

Thanks Doug. 🥔

[@masonmoyer4592]

Is your valve body finished yet I am interested in one for a project that my girlfriend and I are starting? When I was young my father had 69 mustang with a 351 Cleveland that was built by Jerry Hartman who owned Hartman’s driveshaft in Reading Pa and the car had a c4 with a manual value B&m and it was awesome and I would like to be able to have the same but in a 95 f150 4.9 e40d. Thank You

[@coperacingtrans]

@@masonmoyer4592 yes it is

[@cncfabrication]

I sent you a message via FB messenger awhile back on tests one of these for you.

[@coperacingtrans]

I am making one protype, from scratch. I will be testing it in my transmission dyno, then if all is good, a F250 truck. Once I have this all tested and everything is tweaked, and I have a 100% working Protype, I then will test it in something fast.

[@bbkr7910]

Several companies that might be able to build a high stall E4OD/4R100 torque converter: Roadrunner Converters (Phoenix, AZ) Pro Torque (Yeadon, PA) RevMax (Charlotte, NC)

[@1991tommygun]

If you can help me make the E4OD in my 1991 Bronco with a 351w fully manual so i can go carburated i have the Money ready!!!$$$$ ive been searching for something like this for so long! Im done with solenoids and computers!

[@coperacingtrans]

www.coperacingtrans.com/?product_cat=ford-e4od-4r100 It is all listed here

[@1991tommygun]

I sent you an email. I need a few more things! ​@@coperacingtrans

[@johnwilburn]

Getting rid of Ford’s horrible column shift is selling point all by itself! Transbrake solenoid on the “top” of the valvebody?

[@coperacingtrans]

on Top of the valve body when the trans is on the bench

[@gradyfarrer5146]

There are multiple transbrakes out there for the e4od/4r100 Some of them have been prototyped and only a small circle knows Some of them have been published/marketed even in magazine articles this year already Best of luck on your design, it will join the others already out there

[@coperacingtrans]

I have seen Ethan's prototype, I have looked on line and did not find any trans brakes out there from any company. If you have links to them, it would be much appreciated.

[@gradyfarrer5146]

@@coperacingtrans I have been involved with a beta design, and I know there is one more that I wasn't involved with...besided Ethan's These are based on stock castings and they remain autoshift

[@coperacingtrans]

@@gradyfarrer5146 Well, I have seen none on line, none in production, none for sale. Just like my 48RE valve body, this 4R100 valve body will be like no other.

[@chuckvanvleet1268]

A1 transmission experimented with it a while ago I've been waiting and wanting one for a lighting if you get it working I'm definitely going to be in line to order

[@richardmoerke9329]

DAM!!!!! You are going to be a hero!!! Ford people will be at your feet kissing them. I can’t believe someone has not done this already. It seriously takes a man like yourself to do this. I really hope you get this done. Be really cool to see you and Andy working on this project together.

[@UnfinishedProjectDartSport]

🥔