E90 boost gauge, E90, E92 P3 Cars VIDI

[@supacatsf]

Configuring The Gauge ENTER CONFIG: Simply hold both buttons to enter the config menu; you can do this at any time! RELEASE the buttons 2 seconds after you see the word “Conf” flash on the screen. SAVING YOUR SETTINGS: Your settings will not be saved until you exit the config menu by HOLDING the rightmost button until the gauge turns off or resets if your car is running. Config Button Functions: Left Button TAP = Change Value Right Button TAP = Peak Recall Left Button HOLD = Change Value fast repeat Right Button HOLD = EXIT and SAVE settings. Configurable Parameters: (default setting in BOLD) Display Options / Valet Mode d.On = display on, normal operation, Off = Lockout / Valet, display off. Enter config with car OFF to re-enable from valet. On.A = Auto dimmer (must attach green wire to red/gray dimmer line on trunk pop switch or other locations) On.P = persistent dimmer, (stays on last setting after restarts.)

[@ArielNexus]

323i year 2007 pack M ???

[@P3Gauges]

You can run our Analog gauge to read boost, battery voltage and 2 analog inputs - www.p3cars.com/bmw/p3-analog-gauge-bmw-e9x-2004-2013/ Our V2 gauge for pre-2008 BMWs has been discontinued due to processor chips no longer being available.

[@MZ-ul3uy]

I mistakenly put my car into valet mode, so my P3 gauge isn't turning on when I turn my car on. Can someone help me turn it back on and get off of valet mode. Thank you!

[@BMWI-gk9wh]

Yoo marketing team, what features does this include I'm waiting in check out cart till we get info

[@P3Gauges]

Yoo John John check out our product page where all the features are listed - www.p3cars.com/bmw/p3-v3-obd2-bmw-e9x-gauge-2008- Please let us know if you have any other questions.

[@BMWI-gk9wh]

Thanks just got it in mail !

[@kingrabbit6971]

It dont come with a obd plug, just a bunch of cut wires thats needed to be attached somewhere, this is not a plug and play like i thought i was getting

[@P3Gauges]

Sounds like you ordered our Analog gauge. Here is our V3 gauge (which is an upgraded version of the V2 shown in this video) www.p3cars.com/bmw/p3-v3-obd2-bmw-e9x-gauge-2008-2013/

[@paulalves2529]

Does this fit the E93 ???

[@P3Gauges]

Yes it does!

[@supersonicu1]

Does it fitted 320d?

[@P3Gauges]

Yes it does👍🏼

[@mpwonders2329]

Does it work for 328?

[@P3Gauges]

Absolutely

[@josemariel7216]

Does it fit an 06 325i?

[@P3Gauges]

Yes, you'll want our V2 gauge for that car - www.p3cars.com/bmw/bmw-3-series/p3-obd2-multi-gauge-v2-bmw-e9x-2006-2007/ If you have any other questions please email us at [e-mail] or give us a call - 614 317 3035

[@josemariel7216]

Thank you for your fast reply!

[@P3Gauges]

@@josemariel7216 no problem at all👍🏼

[@jhys88]

does this gauge have all the features or just boost?