How to Bring the Best Out of the HGUC Sinanju Without Heavy Customs!

[@emperorkiva8063]

I'd say that for a beginner the reverse wash technique would be less scary than just masking all that detail hehe

[@havocsurge7667]

Yeah. Masking like that is torture

[@edgelord3617]

or even just handpainting with a good brush. EA Gunpla does that later in the vid so I think that would be fine to do with the gold trim details

[@deptless]

@@edgelord3617 yeab but that said, it would be significantly harder to get a good finish by hand painting

[@BronzTheBear_0408]

My goddamn ass was about to ask "how's your *RG* Sinanju's limbs stay and doesn't exploded?" and then realized it's a HGUC 🗿😂 You're one of the best gunpla customizer out there. Keep it up, sir!!!

[@EAGunpla]

Thank you so much bro!! I will do my best for the community!

[@thedandy6765]

my rg sinanju doesnt fall apart or explode i can send proof if you want me too

[@Mr._Gunpla]

I think I speak for everyone in the community when I say thank you for producing this back to basics series. It really helps show what is achievable when you take the time to process the kit, even without heavy modifications.

[@ry0usama511]

I used to be happy with straight builds till I realised, "Why I stop here when it can be better? I paid so much for them, need to make it worth!"

[@Iskelderon]

Thank you for showing people how much can be achieved by mostly just accentuating the detail that's already there from the start. It's only up from there.

[@Shazalakazoobang]

Coming from Warhammer, my techniques might differ a bit, but that video helped me a lot to get an idea, on how to tackle my Sinanju, great work!

[@AnonNotAnonymous]

I just bought this kit. I need to try these things to make this one look good. Havent really built one since i was a kid and i want to take it up notch. Easily my favorite MS.

[@teenyweenymonkey]

amazing video! i loved the part where you go over the importance of base coat and primer colours and when you show how to deal with seamlines

[@EAGunpla]

Thank you..!! 🙇🏻‍♂️

[@SuperLumberjock]

WOW!!!! I wish I have your skills and more importantly, your patience! Hats off to you sir!

[@hammerhead4941]

First of thank you for all your great content. You're probably the builder I enjoy the most to watch. I've started building gunplas a little less than a year ago and have been learning to customize them shortly after. Just yesterday I started to build my own HG Sinanju and I'm trying to replicate some of the techniques from your video. I'm always amazed by how easy seam line removal looks in all the videos as I'm still struggling to close those damn gaps 100% 😅 And then I sand to much and in the end it looks not very nice. I still have much to learn, but it hits me because it's one of the basic techniques for custom builds.

[@CP-yo6dd]

I’m can’t express how appreciative I am for your videos. They’re extremely helpful and fun to watch. Thank you for your videos!!

[@ALPHA.Mods.1]

I really like this video, as i'm just getting into customs. Especially the way you connected, and then sanded to remove the seam lines

[@EAGunpla]

Glad it was helpful! 🤩

[@bongkem2723]

you turned a simple HG into a piece of art !!!

[@michaelbrata5036]

Really love how the way you paint the kit :)

[@moshie6220]

Fellow Malaysian! 😍😍😍 Btw love that look on the final product, it is truly just simple mod, no kitbash and all, just improvements to make it perfect as it supposed to be, looks like RG with all thay details

[@mcgritty8842]

It’s time to get back to basics! I’m foxusing on removing nub marks better, removinf seam lines and scribing. After that I’ll add some paint… BUT NOT UNTIL I’ve built that confidence. Thank you for helping ❤❤❤❤❤

[@kingarzal1502]

Do you have tips ojln removing nub marks ?? I can't removed it on mine...

[@hannibalkim]

Applying sticker was the hard part but over all it is one of the greats

[@husainihusai8754]

Bosskur sya bgi cadangan lepas ni buat affiliate shop kt ruangan komen senang kitorang nk beli model yg sama.. Bosskur pon boleh la dpt commission skit.. 👍🏻💪🏻

[@muhammadnadziff1513]

saya sejak jumpa channel abang, memang tengok semua video dari awal. memang custom abang paling saya nak ikut 😭 sebab tak over do sangat

[@EAGunpla]

Terima kasih banyak2 broo!! Terharu dengar! Hehe tulah mmg style sy suka mcmni, simple2 dan tak terlalu over custom.

[@muhammadnadziff1513]

@@EAGunpla betul, and sinanju ni paling saya minat since hard fan sinanju & sinanju stein. majority saya tengok banyak pakai resin, tapi abang basic2 + touch up je. banyak saya ikut tips abang 😎 tq tq

[@Yukez782]

This is just beautiful and amazing, thanks for sharing this quality content! 👍😃

[@iryairya2008]

Love it!!! Glad you return!

[@muhammadfakhri5926]

Masa bawak keluaq wet tisu tu, trus lam ati..." haa tudia, dia nak tukaq pampers anak dulu..." , hahaha...trima kasih atas videonya geng, very2 inspired...tq2😆😁👍🏼👍🏼👍🏼

[@EAGunpla]

Hahahah!! Dah mintak kat bini dulu boleh tak amik satu paket 😂😂😂

[@JOHONG2024]

I think you are the best builder on KZbin. Always a joy to see your video.

[@EAGunpla]

Wow, thanks! I really appreciate it!!

[@marquise8094]

Whats more amazing is the amount of patience you have by doing masking technique instred of reverse wash method on those sleeve parts. 😵😵😵

[@phatle8912]

I've been waiting for this video since you showed the teaser on FB. Great video, sir.

[@LongshotLennox]

Thank you for the uploads, these videos have been both incredibly helpful as well as relaxing to watch :)

[@EAGunpla]

Glad you like them!

[@nobody-kp5co]

Your work is absolutely awesome! Would you ever consider customizing the metal gear solid sahelanthropus kit?

[@DrolthKar]

I was wondering if you could give me a tip on where to find a good diagram for where the water transfer decals are all supposed to go? I'm nearing the end of my own sinangu build but can't find any good references for where each marking is supposed to be placed.

[@jayempreem]

This is the best of the best Red Comet Mobile Suit design of all time period. Full Frontal removes his mask and smiling right now.

[@Tae-hyoung-b7s]

When I do my gunpla builds I always use what you use

[@jaypeeluga2701]

i never thought of using the putty as filler @_@ niceeee build EA!

[@EAGunpla]

Hopefully i can share more tips n tricks!

[@PAYBACKaiw]

Hi, want to ask for your opinion on painting part. I live in an apartment and don't have space for airbrushing, would very appreciate if you have a tutorial on handpainting as well.

[@dannysaravia6834]

I dunno how I missed this. I'm glad to catch another banger tho.

[@JongsungChoi]

can you do a tutorial on finding and locating mould line on gunpla pieces and tools and techniques on removing them without altering or damaging the part.

[@MPBones11]

Damn, now I don't even want to build mine. This one looked sooo good.

[@vampireduck42]

Hi I am new to gunpla and stumbled upon your video and it has been a big help. I would only like to ask how did you manage to remove the seams using the quick setting tamiya cement? I am having trouble doing it due to the glue drying fast and also me unsuccessfully removing the seam.

[@jek014studio]

Impressive build as always! Thanks for the video, EA

[@EAGunpla]

My pleasure!

[@dolyharianto]

Another home run video, could you please tell us the red you use for this Sinanju? It looks very bright.

[@muhammadjamil8149]

very calming video.I love it.hope to see more

[@EAGunpla]

More to come in this series!!

[@pooz78]

what a gold color you used ?

[@habibrachman3776]

I do really appreciate that you shared the meticulous efforts as they inspire me to put more patience on my work with model kits. Double thumbs up. I am still working on making rifles and frames (for MGs) look better but have not made my mind over painting them as some do not suggest painting ABS plastic. Do you have any suggestion? Many thanks.

[@raidenshogun_26]

LEGENDARY IS BACK GUYSSSS ❤❤❤

[@josuemalpartidarojas1779]

the kit lost the arm mobility with that cut and epoxy? or how it works?

[@fansze5033]

Beautiful work. What kind of red you use?

[@Ahuyyyy]

what type of epoxy putty did you use for the arms?

[@AverageGunplaEnjoyerPH]

HGUC Kampfer for your next build... I'm so excited 🤩🤩🤩

[@ivansoh6957]

Good evening Nice work, bro Happy New Year of 2024 for you. Wish you have more fun on building gundam. The new hg kits 1) hg rising freedom gundam 2) hg Immortal justice gundam Wish you may get it too :)

[@berserksamurai]

was there a reason you didnt go with reverse washing for the gold parts?

[@mattcappelli5822]

Great video! Very useful info. How long do you want to sand the seams after gluing?

[@gamergenixcentral1718]

If there are seamlines that I fixed like you did including the sanding wouldn't it ruin the colour since when you sand it you remove some colour. I ask this because i just got into gunpla and haven't started to learn to paint. I was wondering whether when you sand the gunpla would it ruin the colour?

[@Sirenius000]

It does faded a bit. But I always consider them cheap tone-seperation, like how RG has two tone colors

[@GoldyGoldmembers]

Final product looks amazing. Like I've seen various other comments asking, would it be possible to see a list of the tools you use or the paints used for the kit?

[@zayarphyo7770]

Should we paint joints and polycaps or not

[@abduliswarndy9151]

Org msia rupanya😊

[@gabanko]

May i know What size the hand paint brush u use bro..

[@peppy.gunpla]

❤ hoping you’ll consider gupla photography tips as part of the basics :)

[@ghouleggy5634]

YOU. NAILED. IT. AGAIN.

[@EAGunpla]

THANKSS..!!!! 🤩🤩🤩

[@jokervendetta7431]

the golden parts tho🔥🔥 damn thats too detailed

[@esmadiabuabuseman3370]

This video is a real class act. Well done Malaysian! How do I contact you in person for commission project?

[@EAGunpla]

Thank you so much! You can contact me thru my email [e-mail] or DM me on instagram 😊

[@Aszarot]

What is that white material you use to fix the spikes?

[@hvcbandit5583]

What do you mean by removing the mold lines?

[@TheMickzaa]

ouuuuuu the Kampfer is next!! can't wait for the next episode!!

[@kingazis7845]

this is crazy work, really cool. may i kmow how much hours/days to complete custom this kit?

[@돼지-u2i]

That gold looks very nice!! I want to apply that colour on my sinanju! Can you tell me what you used?

[@genericcommenter2676]

I’m having trouble getting a nice finish after sanding down nub marks. My kits are unpainted, it’s very obvious on dark colored parts. i use 400 > 800 > 1000 grit, any tips ?

[@jorgeweisson4807]

what type of paint do u use on the models? is it acrylic based or lacquer?

[@NeonGremlin]

Loving your tutorials. I'm a beginner, and following these videos are helping me immensely. I do have a question about the Zaku 2 you did... What colors did you use? I love those greens and was curious about what you used. Thanks in advance, and keep the videos coming 😊❤

[@xxnike0629xx]

With the releasing of the MG MSN-06S-2 Sinanju Stein (Narrative Ver.) "Ver.Ka", I wonder if Bandai is going to use it to make a new version of the MG MSN-06S Sinanju. 13:45 Wow~ I'm impressed with how clean this came out!

[@rx-105xigundam2]

@xxnike0629xx I wonder if you'll gonna do again an all-out anti-UC crusade ....

[@rx-105xigundam2]

@xxnike0629xx and BTW, this year will be G-Reco's Decade anniversary ...

[@rx-105xigundam2]

@xxnike0629xx will you do again an all-out anti-G-Reco crusade?

[@rx-105xigundam2]

@xxnike0629xx or still no? Because you are still too ...

[@rx-105xigundam2]

@xxnike0629xx too Charlie Oscar Whiskey Alpha Romeo Delta Lima Yankee to do it again ...

[@Crosszero1]

Do you mix the Matte and Gloss topcoat or do you do individual coats?

[@supergavinachillesahk8802]

great video! what did you use for decal application? is mart setter or softer? or both? thanks in advance!

[@blukara7]

Simple and easy to follow! Thanks!

[@EAGunpla]

Glad it was helpful!

[@ahmadriyani1489]

yang dtunggu tunggu.... yang di nanti nanti...

[@adamsoya4716]

salam bro, boleh sajes brush yang boleh guna untuk color small parts/spaces tak?

[@derekb370z]

What red did you use for the kit?

[@casuallycompetitivecwiss9321]

Nice job man! Great production value too. Just wish it was easier to build and watch the video at the same time ha

[@EAGunpla]

Thank you so much!! 🙇🏻‍♂️

[@thedarkfloyd7517]

How long to do a build like this?

[@jmssun]

Incredible! I saw WH2K uses pink/purple primer and got great results, and wonder why gunpla don’t use that.. thanks for this demo Btw, would you consider recording your videos in 4K HDR? The color, shine, and detail will be much more pronounced

[@TheMadDanny]

Very impressive. Did you consider doing a reverse wash for the golden raised sections? I've seen many people refer to it as an easy way to paint sections like that but the only time I've tried it I got mixed results

[@hazimisa1622]

Superb work as always, may i know what type of brush do you use for handpaint the small details?

[@muhammadharyadi1347]

Thx lot brother, you show me some new technic and usefull method even the tools you used, appreciate it…

[@EAGunpla]

Happy to help!! 🙇🏻‍♂️🙇🏻‍♂️

[@syahnazjais3766]

Great as always. p.s you didn't show us how do you paint the golden colour

[@JeffersonSilva-lr6es]

Hello, I'm from Brazil and I wanted to know if you send these paints here? Ea paint series

[@dylancnguyen]

What gold paint did you end up using here?

[@mohamadanas9068]

Waghh Banyak hensem shinanju abg uishhh nak juga.😂

[@erraddict]

How long do you wait, after squeezing the two parts together, for it to dry and sand?

[@EAGunpla]

Usually i leave it for 1 hour! 😄

[@adhamaznan4374]

Mana nak beli kad holder tu

[@ry0usama511]

I wonder what you can achieve if you do the same for RG Zeta and Sinanju

[@Enlapanlima]

What red and gold did you use for this? You just inspired me to paint my MG Sinanju, lol.

[@mohammadzaki5779]

hand paint tu pakai berus apa?

[@dolyharianto]

I just bought a DSPIAE scriber because of this video 😅😅 But come to think of it, it's actually a lot cheaper to just buy a 2nd hand RG Sinanju and concentrate on the painting 🤣🤣 Nevermind, I was just kidding. I think I can get more value from the scriber on my other backlog kits. But then again, if my scribing sucks I would have a hard time reselling the scriber.

[@dolyharianto]

Just as I thought, I suck at scribing 😅 I'll just do the reverse wash technique and maybe buy a 2nd hand RG Sinanju for painting purposes.

[@antoniojantai2138]

Cantik bang repaint saja tetap lawa🥰🥰

[@EAGunpla]

Terima kasih bro..!! 🙇🏻‍♂️🙇🏻‍♂️

[@gabbannation]

pos la lagi bang supaya kami semangat untuk settle kan backlog😁

[@markkirk7305]

Which tray is they for the decals bro?

[@ramza813]

Need to list or show the paints used please

[@atha6500]

do mold lines actually effect the looks of the kit after painting it?

[@fabiosanchez8563]

Yes , a lot .

[@anonymous-pp9vq]

can you make tutorial to detail a GM?

[@MrSimoroy94]

Amazing video, but god does that masking is on point, i never get those clean lines !

[@aero4593]

Clean! Beautiful !

[@EAGunpla]

Thank you!

[@Samudra-qm9dw]

Jangan2 bikin Black Kampfer??

[@ardansukmanto4373]

My man my bro, are you really busy? Im waiting for your video

[@derekb370z]

Do you recommend a certain scribe tool? Mostly work on MG so would need an appropriate size

[@starlightnebula8907]

For MG I recommend 0.2mm, 0.25mm. 0.3mm is kinda pushing it but you could use it for larger kits

[@paktahn]

you dont need to buy expensive scribes like many will tell you its easy to make your own using old hobby knife blades and or saws i used a few old blades of different brands that were different thicknesses used a 2 sided kitchen knife sharpening stone to make a flat chisel shape on the un-sharpened side after dulling the blade so that i cant get cut by and can be used in the knife handle and if it ever dulls i can quickly sharpen it on the stone for wider chisels precision screwdrivers used for glasses can be sharpened in the same way and are made from the same tool steel chisels are made from basically if it was made for cutting of any kind it can be made into a chisel

[@Black-Comet]

Please review DSPIA Gruton