EASIEST WAY to Drywall Finish a Ceiling for Beginners!

[@PaulPeck]

Be sure to watch this video! kzbin.info/www/bejne/f3uVpo2HrpumhaM Skim Coating GAME CHANGER for Drywall finishers and DIY Drywall!

[@chachaalston1698]

Thanks so much ! I wish i had your skills i gave it a try and did a fair job in my closet. Lol but im certainly no Paul! 😁 thanks for the tips ! Xo

[@PENFOLD1962]

Nice very nice, you should take this up as a career, only joking my friend. You know a bloke is good at his job when he makes it look so easy. I used to use a Hawk and Plastering floating/Trowel. After a major heart attack, both hip's and shoulders replaced I can't do it now. The kitchen ceiling came down just after Christmas and all the mates who are plasterers have either moved on or not in the plasterers gang anymore! Friggin typical eh lol.

[@DutyRon]

This is for me a beginner I so stink at neat and clean work! My wife calls me a beast! I'm better at screwing in the board tapinging and finish not so good! Thanks again Paul for all you do for your community 🤝

[@maddash9070]

Paul. You’re the best at this. I watch you and Kirk giordano for advice and always get everything I need. Thanks.

[@PaulPeck]

Thank you for that man!💥👊🏻 I’ve also been watching Kirk and his son Jay for years!🤓 -Paul

[@kurtisbubier8275]

excellent teaching video keeping it simple.

[@kevincorry5890]

Paul, These are great tips. I just finished installing my ceiling and this will help immensely.

[@santiagodominguez2522]

Can apply Skim coating Overtop of panels 1/4 inch thick plywood you think will stick to it

[@PaulPeck]

I’ve done it before...😇 For best adhesion, use all purpose joint compound because it has the most glue in it. Also, the joint compound will most likely yellow once it’s dry because of the tannins in the plywood. Prime with an oil base stain blocking primer and top coat with your favorite paint.👍🏻 -Paul

[@dvdcohet]

I'm learning a lot from your videos.thanks

[@PaulPeck]

That’s awesome man!💥👊🏻 I appreciate you watching and subscribing my friend!😎 -Paul

[@ScullyPop]

What an honor to be a part of this community.

[@PaulPeck]

I love our little KZbin community man!🔥👏🏻🤓

[@markmajeski5668]

Paul thank you for all of your video's. I have learned so much from your posts. I always watch and learn!

[@PaulPeck]

Right on Mark!💥👊🏻 I really appreciate your feedback man! 😎 -Paul

[@petethehandyman9185]

Great tutorial,your putty knife skills are awesome!

[@PaulPeck]

Thank you Pete!💥👊🏻 I hope all is well man! -Paul

[@moisesrobles7884]

Very nice job bro and tips im smashing my like botton yahoooooooooo kaboooooooooooooom

[@3dandyrandy3]

Nice smooth work Paul 👍 Great video.

[@PaulPeck]

Hey there Randy!🤙🏼 I appreciate the kind words my friend! 😎 -Paul

[@ConstructionKronies]

🔥🔥🔥 Excellent video, explained perfectly. This is exactly what I need to learn right now and can't wait for the butt joint video Thanks Paul👊

[@PaulPeck]

Hey Chris!💥👊🏻 I really appreciate your feedback man! I’m working on that butt joint video as we speak! 😎 -Paul

[@ConstructionKronies]

@@PaulPeck Sweet dude, then I need a corner video!! Do you have one that you have already done?

[@Pokekid269]

Rockin it there Paul!!!

[@PaulPeck]

Right on Lance!💥👊🏻 Thanks for stopping by bro!😎 -Paul

[@thomascuthbertson3693]

Thanks for your help! Not dreading doing my garage ceiling now.

[@SuzyTopAgent]

You make it look so smooth and easy Paul! Hope you have a wonderful weekend!

[@PaulPeck]

Thank you for the support Suzy!🔥✌🏻😎

[@hotsaucejunkietim]

I cannot wait to start building my man cave in my basement I may be doing some serious researching of your drywall videos to coach me along something Like this is perfect 👌

[@PaulPeck]

Hey there Tim!💥👊🏻 Yeah man, just let me know if you have any questions at all. I really appreciate you stopping by bro!😎 -Paul

[@KatNipeverGreeen]

I added a ceiling fan to a room and had NO idea how i was gonna fix the the marks left from cutting into the 15 foot ceiling. I DON'T like drywall AT ALL but you are slowly changing my mind. Thank you

[@PaulPeck]

Haha... Let me know if you run into any questions along the way!👍🏻 Thanks so much for watching and commenting!😎 -Paul

[@kiasmine]

dude, you're good. real good

[@amoscardoza5253]

Yo paully paul!! Your a beast! Good looks!

[@PaulPeck]

Yo Amos!💥👊🏻 I really appreciate you watching and commenting bro!😎 -Paul

[@hardcardcollector1133]

Came here from Roger Wakefield's channel, nice vids keep it up👍

[@santhiyag1650]

This video is very very helpful

[@capcruz1134]

Brasil 🇧🇷 Watch you 👏🏻👏🏻👏🏻

[@PaulPeck]

Awesome!👍🏻 Thank you so much for watching and commenting my friend!😎 -Paul

[@CJsINFO]

*Paul Peck DrywallTube At His Best! Awesome Tutorial Sir! Congrats On 100K Bro!* 👏🏻 😎

[@PaulPeck]

Thank you so much CJ! 🙏😎

[@losmoore3358]

U did a great job. I'm doing a living room ceiling that caved in over time. Wrong nails into sheetrock overtime came off the joist. Insurance won't cover. No water damage and roof is intact. House been built in the 50's. Im doing the job myself first time.

[@josephhunter3227]

Dude that was clean and fast good job bro👍👍👍👍👍👍🤙🤙🤙🤙🤙🤙

[@NRB_75]

Advice... I wet down a batroom ceiling to remove popcorn and got into drywall and tape on edges. Can you skim coat over entire ceiling and use mud to do a knock down?

[@mtnguyen1696]

Do you have videos on the finish product?

[@gilberto518]

A beginner here. Can I do this job in winter??? Or is there like a certain temperature or ??

[@vianalo9591]

Thank you for.sharing this vedio..i really love it this job...i do this also..

[@PaulPeck]

Glad you’re enjoying my videos!💥👊🏻 Thank you so much for watching and subscribing!😎 -Paul

[@vianalo9591]

@@PaulPeck your welcome sir

[@xephael3485]

Congratulations on 💯 k

[@amoscardoza5253]

Hi

[@PaulPeck]

Thank you so much Xephael!💥👊🏻

[@willpinkerton7018]

Why do you not leave any skim of mid on paper tape?

[@sherryspectre217]

Paul today, the 4th of July, is my birthday. I could REALLY use a 12 and 10 inch Tomahawk. it would be a wonderful gift.

[@ednagale]

Great video as usual. I like to use FibaFuse also for repairs. As you unroll the roll of tape, does the fiberglass not get in your fingers? This is my only complaint about FibaFuse. I just try to remember to wear a glove on my left hand that I use to unroll.

[@PaulPeck]

I appreciate that Earl!💥👊🏻 Yes it can be a bit itchy but it doesn’t really stick in my fingers. Thanks for watching and commenting man!😎 -Paul

[@Погонщикконтуженныхтролей]

Contractor here. I believe this "FiberFuse" tape is the third best invention after food and sex - it doesn't allow air bubbles to form, it's much stronger than paper and unlike paper it doesn't have sharp edges so it blends much better, and it's under $5 in big boxes. The only two things about it: you need gloves and mask if you don't want itchy palms and fibers in your mouth, and also - it doesn't fold well, so occasionally (for some corners for example) I still prefer to use paper. Great job, clean and fast.

[@guyrabinowitz]

Sir, what would happen if you did not affix the fibafuse tape--if you simply applied the mud by itself?

[@PaulPeck]

It will crack ever time. 👍🏻

[@stevewest3705]

Thanks for this! Clear explanations for everything you're doing! Very much appreciated! A small (not really that important) critique for future videos is to take the sound off the original clips (or lower the volume) so the sound of the knife hitting your bucket doesn't distract from the commentary. Cheers mate!

[@joefox2508]

What do you use to cover the floor? Assuming you are going to texture it as to why you covered it?

[@PaulPeck]

It’s a 4 mil plastic.👍🏻

[@diehardfan173]

Nice movements. I can tell you have lots of experience doing this. Do you have this down to a science obviously but,I’m curious why we don’t put mud over the tape on the first pass.

[@capt.slamkalski5332]

I'm a drywaller, hang and finish. I have to double hang 5/8 past the ceiling in apartment units. Sound proof or fire wall is what they want. I'm trying to find a faster way of hanging that. Past the 8 foot ceiling on the side walls that divide the units. Not outside walls just the units side by side. I just don't want to go up and down all week.

[@cwrowe]

Good video

[@PaulPeck]

Right on CW!💥👊🏻 I hope all is well with you! Thanks for watching and commenting my friend!😎 -Paul

[@TimRoseOfficial]

Hi Paul! I suck at drywall and anything construction related but if I ever need help or advice I'll make sure to watch your videos for help! Congrats on passing 100K my friend, you really deserved it!

[@chriskeel3096]

nice trick. id probably use an 8 to wipe with personally, but yeah

[@1ReviewGuy]

Hi great video...I have a question. I move into my new home next Tuesday 6/30 and it has a unfinished garage, so I'm going to prime, texture, and then paint. However the ceilings are 9' ft tall can I spray the texture from the ground? Do I need to turn up air pressure, or do I need to stand on a ladder and continously move it? Also, I'm doing knockdown texture on walls and ceiling and bought bags of Blue Line II is this the right stuff or should I get something else?

[@xephael3485]

So after this dries do you sand a bit and go over it again with larger 12" skim coat?

[@amoscardoza5253]

Hi

[@xephael3485]

@@amoscardoza5253 hi 👍😄🧰🔨

[@PaulPeck]

No sanding between coats. I’ll just scrape off any ridges or high spots with my 6” drywall knife. Then coat with a 12”. Video coming after the first coating the butt joints video.👍🏻

[@chachaalston1698]

Awesome!

[@valflo8321]

I have a question. I want to replace the drywall in my house but should I start with the ceiling then replace the walls? And can I put insulation in the ceiling as I replace the ceiling drywall? How would I do that?

[@robc2536]

I've got to repair some ceiling cracks at my Dad's house. Would fibafuse be a better choice than paper tape? Does fibafuse have to be bedded in hot mud or can you use all purpose? Thanks.

[@PaulPeck]

Hey there Rob!💥👊🏻 Yes definitely use The FibaFuse for sure. It can be used with premixed joint compound or setting type compound. Actually, FibaFuse has a new tape called FibaFuse Max that is made for cracks. You might have to order it on Amazon because none of the big box stores has it in my area. I hope this helps.👍🏻 -Paul

[@melvinbeboso1656]

I started my drywalling in my basement wall, it suppose to dropp ceiling but we have extra drywall so we decided to use it on ceiling, is it still gonna be ok cause I've read that ceiling first before sidewall, thanks in advance

[@xephael3485]

Garage ceiling, I wouldn't even bother mudding and taping it unless I was getting fancy and doing epoxy floors 😂👍

[@amoscardoza5253]

Hi

[@xephael3485]

@@amoscardoza5253 hi again 😎

[@PaulPeck]

I hear ya Xephael... 👍🏻 Thanks so much for watching and commenting my friend!😎 -Paul

[@TheCarpenterUnion]

What consistency though? I always end up dripping all over myself.

[@audrastraw6638]

That was impressive! We are redoing our kitchen, so I'm here watching these diy videos. Is there a world record for fastest mudding? Cause I think you could win!

[@JDlupin]

Is he a giant or is he levitating

[@narendra672]

👍😀

[@PaulPeck]

Thank you!👍🏻😎

[@Rushmore222]

It would seem like the first lesson to master in order to make drywalling ceilings easier is how to be 6'8".

[@tracy419]

Dang, I was hoping you had a link to tips for doing that😂

[@AL-dz7ws]

👏🏻👍🏻

[@miriamtaylor4405]

What if I can't reach the ceiling lol.

[@stockonlive2208]

Fibafuse is best in a auto taper not good for dry tapeing. Puts fibas in the air. Also you don't need hot mud with fibafuse. Lol just all purpose

[@kimmay3774]

Great work but you must do something about the GoPro! I felt drunk after watching

[@Tayman47]

the GoPro angle was great, there isn't really a better way to go about filming it.

[@konamanstudio2447]

🍻🍺

[@PaulPeck]

Thank you for your support KONAMAN!💥👊🏻😎

[@TheStillwinterNation]

drywall cielings? better call paul.

[@PaulPeck]

Yes! Everyone listen to one of the smartest humans I know!💥🙌🏼🤓

[@WilliamCurry-bh3dk]

QUESTION PURPOSE OF TAPE ?

[@angeljustice351]

My job is worse

[@boss2923]

never use mesh tape with lightweight joint compound ! Absolute no no !