FAST and FLAT Butt Joints for Beginners!

Fast and flat butt joints for beginners is what today's video is about. I'll be showing you a slowed down version of my drywall finishing technique. I'll be using FibaFuse drywall tape an 45 minute hot mud to drywall finish these butt joints.
Please consider Subscribing to see more of my video's.
🔴 SUBSCRIBE for more useful Tips goo.gl/Es5k5z
Feel free to ask any questions about any of my drywall finishing butt joints tips in the comments down below.
Thanks so much for watching! -Paul
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
☑️For more information click the link below to my Drywall and Painting Shop where I have each and every tool and product I used in this and all of my videos: (This link is an Amazon Influencer store link where I'll earn a small commission if you make a purchase at no additional cost to you). ▶ www.amazon.com...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you're new to the channel welcome! My name is Paul and I've been a drywall and painting contractor for over 20 years. I'll be sharing tips, tricks and how to videos for all of your drywall, texturing and painting needs.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My last two uploads:
EASIEST WAY to Drywall Finish a Ceiling for Beginners!
• EASIEST WAY to Drywall...
Skim Coating GAME CHANGER for Drywall finishers and DIY Drywall!
• Skim Coating GAME CHAN...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FibaFuse Drywall Tape:
• Fibafuse drywall tape
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tools YOU NEED to diy mix quick setting joint compound!
• Tools YOU NEED to diy ...
** More Helpful Videos Down Below **
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Soundproofing walls without removing drywall- Green Glue compound
• Soundproofing walls wi...
Checkout my Never seen before super double dog secret diy skim coating tips and tricks KZbin Playlist: • Skim Coating Walls for...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's the Part 1 of the Water Damage Repair Video Series where I show you how to access and dig into the water damage drywall ceiling and a water blistered wall
• Water damaged ceiling ...
Here's the Part 2 Video: How to cut out and install drywall on a water damaged drywall ceiling
• How to cut out and ins...
Part 3 Drywall taping and mudding a water damage ceiling repair and wall repair • Drywall taping and mud...
Part 4 Mudding and skim coating a drywall ceiling repair tips and tricks • Mudding and skim coati...
Part 5 How to repair texture on a water damaged drywall ceiling step by step • How to repair texture ...
Part 6 How to easily fix damaged drywall by skim coating
• How to easily fix dama...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 1 of the skim coating video series:
Skim coating walls for beginners tutorial
• Skim coating walls for...
Part 2 Never seen before skim coating tips and tricks to skim walls yourself • Never seen before skim...
Part 3 Fix walls with a skim coat
• Fix walls with a skim ...
Part 4 How to easily skim coat walls by hand
• How to easily skim coa...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Easiest way to repair knockdown texture on a wall patch ever!
• Easiest way to repair ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I was mad and punched the wall! How to repair hole in wall tutorial • I was mad and punched ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to apply a skim coat series:
Part 1
Here's the link to the video where I showed How to apply a skim coat to your walls for a smooth finish- Skim coating drywall. • How to apply a skim co...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 2- How to Skim Coat Walls Demonstration
• How to Skim Coat Drywall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 3
What to do after skim coat dries? No sanding!
• What to do after skim ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 4
How to touch up a skim coat before sanding skim coated walls • How to touch up a skim...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 5
How to sand a skim coat fast and easy!
• How to sand a skim coa...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here's a couple of the Skim Coating Demonstration Videos:
*How to skim coat a wall in less then 10 minutes | Diy Drywall Tips and Tricks- • How to skim coat a wal...
*(Part 1)How to skim coat using paint roller trick- Getting rid of Knockdown Texture- • How to skim coat using...
*(Part 2) How to skim coat trick with a paint roller and joint compound- • Video
My Facebook Drywall Help Group
/ drywalltexturinghelp
Instagram
/ peckdrywallpainting
Twitter
/ peckdrywall
Tag me --- #DrywallTube
#PaulPeck #Drywall

[@ffliberty]

Saw a whisper quiet garage door opening system for the first time this week. That probably was all that this homeowner needed to be happy.

[@BushMann731]

Total waste of my time. No sanding was discussed or displayed. So how did your joint's finish out? I bet you had humps where the tape is applied!

[@cwrowe]

Good video

[@PaulPeck]

Watch me skim coat a ceiling with a paint roller! Here’s the video: kzbin.info/www/bejne/b5Sud32Qg8uXgbM

[@DutyRon]

Is fiberfuse used in mostly humid areas or all over the place? Is it much stronger and durable compared to regular tape? Thanks Paul

[@SuzyTopAgent]

Awesome Job Paul! I think Drywall is the only time you want a Flat Butt (Joint) 😉

[@Legend0222]

My bf and I are currently trying to drywall his garage and neither of us has ever done a ceiling, thank you for your comprehensive videos I think this might save us! 😊

[@SimpLeeBeth]

Nobody likes a flat butt, Paul... no matter how fast it is 🤣😂🤣

[@UrbanVanlife]

Once you have gone over the tape with the mud . Dose it go harder like when the mud drys . Or is the tape just for strenth

[@sherryspectre217]

This Fibefuse is awesome to use because it lays down nice and, I think, is much stronger and mildew proof as well.

[@boxingmma.]

Good job Paul👍been a while since I done it👍Hope you're having a good 4th of July weekend bud👍🎆🎇👍

[@theurbanlegenduk1760]

Paul you make it look very easy not hard to do 💯💖👍

[@boxingmma.]

This has gotta be really invaluable to people who have never done it before

[@rfs056]

Any advice on what joint compound to use ? I have to fix some drywall in my bathroom. Not a huge area

[@arrozcongandules2329]

Quick question... Is there any way to remove vinyl corner beads that have been sprayed with adhesive without ripping the drywall?

[@PaulPeck]

Great question. I don’t think that’s possible... let me know if you figure out a way. I do know that if seal it with Gardz you can skim over the brown drywall paper to repair it.👍🏻

[@Paul-kw1og]

Enjoy the work. Thankyou

[@sherryspectre217]

It's my birthday today. I'm wishing for two Tomahawks, a 10 and 12 inch. That would be a great gift. Just saying 🤞 DrywallTube...

[@ScullyPop]

This is your last stop. You don't need to look further.

[@SwampyAcresHomestead]

nice flatting thats for sharing

[@jaandel1]

Best résult beginner or not use an orbital sander

[@amoscardoza5253]

Yo paully PauL!!!

[@konamanstudio2447]

🍻🍺

[@markwigley9185]

Nice job Paul.

[@borys444]

I feel like u left us hanging with only half the video here. What else has to happen in order to complete the joint entirely?

[@jaandel1]

Use a orbital sander

[@MrJawnyNumFive]

Light it up silly!

[@yrtuag]

#DrywallTube

[@PaulPeck]

Right on Jim!💥👊🏻 Thanks for watching and commenting man!😎 -Paul

[@yrtuag]

@@PaulPeck You're welcome sir 🤠