EASIEST WAY TO REMOVE A BALD GUIDELINE!

[@shangee2275]

Love your work. You're actually the only barber I come to because you're clear and precise. Tip: 1:40 "gradually open the lever" needs explanation.

[@evansfj]

This video is on point. I've been cutting my own for a few years, and it's always that bottom line that's been a pain. Thank you for this.

[@DaKing-d1y]

Just wanted to say thank you bro for sharing your teaching experience..I ain’t even no barber ..but every since I’ve been watching your videos..shit start learning to cutt my own hair and save myself a 💰.. thanks again bro and keep bringing that 🔥 techniques ..💪🏾💯

[@roughnrugged2284]

Wow this man delivered precise and practical information in 3 1/2 minutes! Nice 👍

[@rod5654]

You can actually start with blade open, close the lever as you go down on the head......it doesn't create a line.....that's what I usually do and I use corners if there's a faint line

[@rod5654]

It also seems to make the fade smoother, I go from open, halfway, and then close depending on how it looks

[@shanstewart5174]

So is he fading down or what

[@lelindafaulk5335]

@@shanstewart5174 the method Rod said is fading down, this barber did the whole fade and took the bottom line out last… so kinda down then up.

[@neilledejongh1290]

@@shanstewart5174 his fading up cos its close to open

[@BrownYog]

@Rob Suber that’s how Supercuts teaches a fade. Down because you cause always take more off if needed working downwards. It’s the best way I feel for newbies especially ones that aren’t as confident doing these cuts

[@denisecharles5874]

ABSOLUTELY WONDERFUL😃...........The main thing is you took your time and did it SLOWLY , that's the big mistakes all barbers do while teaching beginners like myself on the Tube , 99.9 of the videos a way , way too fast. I think some of these guys are simply showing off, to be honest cause no teacher teaches like Flash. This is the best so far .My little son hates going to the barber . I had almost given up and just decided to go direct to my nieghborhood barber and pay him to teach me SLOWLY AND CAREFULLY . You are such lifesaver. GREAT VIDEO, thank you so much . ❤❤❤❤.

[@CopperheadBarber]

I really struggled allot as a starting barber to cut this line out! props for the vid man! appreaciate it!

[@WilliamVasquez-tj9up]

Facks bro cuz sometimes lever closed and 1.5s they just shave and make it go higher

[@thanksmaddytv815]

@@WilliamVasquez-tj9uphave you improved?

[@WC1Master]

Thank you so much for sharing!! This has been the easiest tutorial!

[@kimberlywarren96]

I watched this video again and love the way you explain your steps and easy to follow. Your videos are very helpful and simple to follow. Very nice fades too!

[@byronrichards3001]

Thank you kindly for this upload, your knowledge and expertise is very much appreciated. Keep informing the people...

[@crazye2939]

Very informative,practical and not confusing 🔥

[@CutzByMayo23]

Just what I needed to see! This video was on point! 👌🏾💯

[@sadiejurado3316]

Thank you, I have been cutting my boys hair since COVID started and this is what I have thee most problems with…. Wish me luck thank you for the thorough tutorial

[@justinstein271]

Great tutorial, straight to the point.

[@dadofthree7922]

If you cut upwards with a 000 blade you can always get the line out with your edgers. Im a vet been in the professional game since 98 and never had this issue

[@superdude7459]

So you're not talking about a 000 clipper guard are you?

[@ksissor75]

Finally a video short enuff not to loose my interest thank you!

[@1polyron1]

This is simple and precise. Thanks man. One more thing, can you make a video in this style showing how to trim the top of the hair in the front, side and back of the head to gradually taper into the line-up? Hope that made sense. My blending skills are not were they need to be.

[@334coldestbarber7]

Just put it in with your clippers closed and you’ll never worry about struggling, the goal is to make the job easy as can be. If set in harsh then u gotta take it out with what u put it in with

[@dameiancampbell7283]

To summ it up 🤣😭💯💯💯💯

[@dameiancampbell7283]

The most highly requested question

[@MLFL609]

Couldn't concentrate with that pimple staring at me! POP IT!

[@kimberlywarren96]

Your videos are very helpful. Simple steps and consistent.😊

[@Dmaccabees]

Thank you 💯🔥

[@salone1973]

Thanks a lot for this. I’ve been looking for a video to help me with this. Short and concise!

[@marlostanfield1946]

I always flip the trimmer around when making guidelines the line is so much easier to remove saving me time on cuts

[@jeaninesmith9376]

Thank you Thomas for this video, it was very helpful!!!!

[@chicheng934]

Thank you this is really helpful, glad recommended videos guide me to you.

[@thuggieboi1]

Thanks for sharing, I’m a barber and I sometimes have issues with getting the bald line out, I appreciate the tips on how to get them out

[@TruthandTruthAgain761]

Love the work you do. I learn how to cut my hair b/c of you.

[@Mightywashbelly]

I started cutting my own hair during quarantine, ive used your videos for reference. I appreciate your help. Could you do a video with a client/model with thinning hair/ balding, i wanna see what technique you use in order to not make patches.

[@talktothehand5571]

Godamn u make it look so easy. I do my own haircut and I was at it for quite some time and I'm scared to do my next self haircut in 3 weeks cuz I might actually mess up.

[@TheresaGarcia-z2o]

You explain everything very well thank you

[@aristonbautista2338]

Great tutorial!!!Precise and easy to follow!!!

[@johndocherty7173]

Great video the one I have been looking for

[@317MaseX]

Do you have video for how to “zero gap” your clippers ? I may need to do that in the future

[@supersaiyanty9542]

Yeah I need that video too hopefully he makes one

[@Chasinmulaa]

Theres plenty

[@Zackaveli]

Just buy Wahl magic clips. They already zero gapped and affordable.

[@supersaiyanty9542]

@@Zackaveli good looks I’ll check those out

[@Tottykidd15]

I love this guys work

[@jacquiajohnson872]

This has helped me tremendously.

[@ronnieburris6357]

Very helpful especially about the small gap when fading out the line. Big Thanks.

[@HMoney25]

I'm in my bathroom self cutting in low light... God help me because it's fixing to sunny tomorrow🤣🤣🤣. Thanks for the tutorial. 💯💪🏾

[@markusmcgee]

Good video!!! Doing it on yourself takes practice. Once I zero gapped the clippers I was good.

[@karimaburkes4872]

Thank you and yes it was helpful I want to see slow motion step by step on any fade

[@marvalousbydesign]

What if you got detachable blades? How do you do it? I got the Oster Octane clippers. I work at Supercuts they require us to have that type clipper.

[@tyashiasmith2783]

Thank u so much. I’ve been struggling with this! This was very helpful to me! 💪🏾✍🏾✍🏾

[@Darktoast20]

Thanks a lot. I've been struggling with this.

[@luizgaleanho507]

Thanks 4’ not being envious:) that make Y’ a Master!!!

[@jayneunderwood2620]

This helps me out alot. Thanks!

[@bentsubscribe9816]

Thanks bro...we love your effort

[@RoccHoundBeatz]

Can you do like a super in depth video about fading in between 1 & 2 when doing a #2 mid fade. It’s so hard to get rid of my lines.

[@dariusnelson8187]

Good to see your sub went up I haven been on your but been subscribed since u were at 12k

[@uhhidk8450]

Thanks Again For Your Time And Experience, God Bless You Brother

[@bennypena1680]

Well put homie!! Thanks for your knowledge.

[@RichardAncirajr]

Great video ma boi

[@MBoundGraphics]

This fusho help I was spending 30 mins tryna get the line to disappear lol

[@jaredjohnson4077]

Thanks bro I needed that

[@victoriafrausto2232]

How do you know which clipper is zero gapped ?? Ive being trying to do fades with a wahl designer clipper and it doesnt blend 😢

[@jayarce6241]

Perfect tutorial ‼️‼️ I love your content brotha

[@vonmcfarland2073]

Great stuff!!! Really helped out!

[@denisbasshead7787]

Oh yeah boss im doing This always 🤝

[@gilbertojimenez852]

Grasia hermano buen corte aprendiendo desu talento bendiciones desde México mi saludo

[@1belindabarker]

Great video and great tips💗💗💗

[@MrLugo978]

Man this video is definitely helpful I subscribe for sure 💪💯

[@magellwilliams2363]

Thanks nice clear instructions. Great video 👍🏽

[@donaldugondo4042]

This is amazing i learn something there nice work

[@djaceboogie_nyc]

Very helpful. Thank you for this video

[@dank1313]

Thank you 🙏 Great video

[@carriemoore8207]

Is there a way to get around this line if u don't have clippers with a lever?

[@Raider352]

That technique is fine but It really depends on the type of hair you're trying to fade.

[@sidsolovelyyy]

Thank you for showing a more detailed video !

[@juaresnetodepaulaneto2909]

That a good way to do it !! Simple!!

[@WilliamVasquez-tj9up]

Shit I be scared of that lever closed and .5 aka 0 guard cuz sometimes that shit be pushing the fade high

[@jovicaduro7204]

Very very cool do you maybe more clips guides ?

[@hugo8578]

Great I needed that

[@jonquavissanders2082]

This helped a lot !

[@lesliehill3025]

Ok if my clippers are not 0 gapped, would my trimmers help?

[@jwin3351]

Ty for keeping it simple

[@Dave-ug4cd]

I still see a couple lines in the fade buddy. Still a very good video. Good content. Congrats to 100k subscribers!!

[@roronora]

🧢🧢

[@alimartin7416]

FIRE ~ THANKS LOVE!

[@317MaseX]

Thanks for that link!!!

[@paigeofstylez]

What if I put my bald line in with my clippers that aren't zero gapped. Can I get the guideline out with those same clippers

[@arnelagorilla3185]

Very helpful. Thank you very much.

[@lrjosey]

Thanks this was very helpful.

[@tonetone86]

Thanks for the lesson well needed, but I have question ❓is the masters to he best faders

[@believeedokpolor7840]

It was helpful. Thanks

[@mprose2600]

Please help every time I try to remove the line with the level fully close. All I do is I create another line. lol now, why is that?

[@lifeentirely8369]

Great video, please do you sell the following clipper guards like the #1.5 ,#.5 and #.0

[@l_steele_entertainment9223]

Great work

[@beckyakpomiemie3931]

Thank you 👍👍👍

[@donnielindon8851]

Awesome bro stay safe yall

[@youngrichieolamide5378]

Nice job bro

[@willnaa7015]

Love the content. Keep it rolling. Question, how do you get them clippers zero gapped?

[@carlosarce6352]

Thank you brother.

[@davudgrosic6914]

Thank you 👊

[@supremetrimmer]

Amazing!🔥

[@ernestotapia8806]

Bro I just started cutting my own hair and I got a crease in back of my head witch makes it hard for me to do a mid fade since I’m just beginning and where can I get o gapped clippers I think I got the idea Down I just need some good clippers and suggestions

[@devonac34]

Thank you Easy Clear instructions on this video. Question? So when your gradually opening the blade to fade are you move up or going over same area?? Please specify Thank you

[@thehighestcontent857]

You want to gradually make your way to the next guideline the more you open the lever.

[@tglondonwellington1132]

amazing explanation....thank you

[@cloudcity2012]

How do you remove that pimple tho?

[@anonymoususerxoxo]

🤭 That thing need it's own video

[@barbarahardy6847]

Thanks 4 always sharing. 🙏🏾🙏🏾💯💈 💇🏾‍♂️💺👨🏾‍💼

[@bingoyoureawinner1845]

Thank you 😊

[@filisemaafu2547]

Need a how to fade video thank you

[@devonac34]

Yes really simple thanks!!!

[@619MMH]

What kind of blade are you using?