EASILY Replace Ignition Coil On A Toro CCR 3650 Snowblower

[@elvis7094]

I don’t have a snowblower. Hell, I don’t even have snow! So, why am I watching this? Cause it’s Taryl. That’s why.

[@wrencher1998]

Funny I just replaced the coil on my Arien 2T snowblower yesterday ~ I’m also watching because it’s Taryl!

[@theropshop8646]

Taryl, Thanks for the shoutout! Your video was great! We are so happy we could help you and many other with our product. Stay Rugged my friend!

[@scrappy7571]

I don't have a snowblower, lawn mower, a yard or driveway. But I watch every vid.

[@Sneakydevil247]

I’m actually glad my coil went out because I found this channel. Love the mix of knowledge and humor. Can’t wait to watch more !!

[@ristomattikolsi5711]

Taryl's got so much knoledge and skills that it's just amazing and wonderfull.

[@Hectorgutierrez]

Thanks for the Dinner Taryl! I have to replace the starter rope on my Toro CCR 3650 and your video showed me how to get the pull start housing off. Time to get to work before it snows again!

[@driver902]

Ok,,,I finally did !!! No extra parts !!! And the freaking thing started on the first pull !! Your the best !!!

[@carbo2950]

Just in case it snows in Florida. I will be ready. Merry Christmas.

[@Repair-rookie]

😂

[@biggaspirit1]

The Master at work, Another great video. Thank you Taryl...

[@moonziemoonzie5524]

I love these videos. I almost never own or work on any of these machines but there's a certain peacefulness that come from watching small engine repaira like this. The skits are the most entertaining!

[@OutBackSmallEngine]

3/4 the way into the teardown “ OH ya by the way before you do this check the kill switch wires “ 🤣😂

[@TedBishop1]

if you had to pay a shop to do this it would be cheaper to buy a new blower.

[@jeffshearer5125]

Well, did ya?

[@macermacer6582]

Breaks and scatters engine...lol

[@myronlaidler8034]

Bricks and Scrapiron....

[@johncarlberg4481]

@@myronlaidler8034 breaks and Smashem

[@AmraphelofShinar]

25 miles south of my house is the Gulf of Mexico but I'm still watching Taryl fix a snow blower. I've never even seen a snow blower in real life.

[@BrianHoff04]

Thanks, Taryl. I appreciate the detail in the explanation. I also admire the "getter' done" speed in which you do this stuff. I do a small amount of repair / maintenance work (perhaps $300 / 400 worth of stuff / month). A thing that I do because I'm OCD is I clean every single thing I can reach. Between that and my need to put anti-seize on everything this job would have taken me 1 1/2 - 2 hours. I use Mequiars surface cleaner. It's amazing on metal & plastic & is not excessively glossy like Armor All. Mostly I do it because it drives me nuts not to. But my other excuse is that when the customer comes to pick it up I like the comments I get about how the thing looks amazing compared to what it looked like when it arrived. I also take before / after pics and put them on my website. It's been pretty common that the customer ends up giving me "a tip". On a few rides they dropped an extra $50 over the cost I was going to charge. Love your videos. They help me a great deal . You're a great teacher.

[@daddygc5814]

As a profession service tech.i would never accept a tip ,I find it insulting. I am not a waiter

[@BrianHoff04]

@@daddygc5814 Sounds like a plan for you. I'll do what I do. If, for some reason they believe my service was worth more than what I was charging then they must be fine with paying what they paid. I would never expect to be paid more than what I asked for.

[@jamesfish5630]

Took my no spark 3650 apart re gapped coil and plug also made sure plug wired was fitting tight on plug. Got lucky it now sparks and runs good again. Bought the thing new 20-30 yrs ago and been an excellent machine. Last year I replaced carb with metal type which included filter and prime bulb (fleebay).

[@StevesSmallEngineSaloon]

THAT was too funny guys! How do you find the time?

[@StevesSmallEngineSaloon]

Kyle, you are so GOOD brutha....

[@freetolook3727]

The obsessive compulsive part of me says to lube up the chute worm gear assembly while it's apart.

[@robc8468]

I have a Red 2019 Challenger R/T blast to drive.... we all drive them like we stole them lol.

[@ralphwatten2426]

Just don't drive 'em like you wrapped your neck around a telephone pole.

[@robc8468]

@@ralphwatten2426 No that's what Camaro guys do it happened about 1 mile from my house.

[@ralphwatten2426]

@@robc8468 Yeh, those Chevys put out a lotta horsepower. Hard to control.

[@ralphwatten2426]

;-)

[@michaelglynn2638]

A full workout to replace that coil! My swear box would be full!

[@cenzadziorny5644]

Taryl - thanks for the great video. Using it I was able to get my Toro back and running. You the best.

[@Woodsman160]

We should do a gofundme to get Taryl a lift table. My knees are screaming from watching him work on the floor.

[@williamgrayson4181]

I was just thinking that my knees are killing me

[@elvis7094]

Taryl said he works on the floor for the purposes of filming. It’s easier for the camera guy to get the best shots.

[@erikj.2066]

With all the toys Taryl has kicking around, I think he’d have no trouble buying one for himself if he wanted one.

[@davidstake6857]

And a dental plan for him and JR

[@garysgarage3669]

I've always thought the same thing. I sure Taryl could make a better than store bought lift table.

[@rustyrepairs2565]

Thanks Tarryl! Excellent how to on this Toro. Its not hard to do, just a lot of stuff in the way.

[@petermitchell1662]

Your tip of sanding down the magnets on the flywheel made me think. if there is also rust on the old ignition coil contact near the flywheel magnets could that be the reason for a weak spark and also the reason that the snowblower would not start? My old ignition coil has lots of rust on the lower part where it picks up from the flywheel magnets. if I sand out that rust on the old ignition coil is it likely that the old coil would be fixed and would work?

[@the4thj]

Yes, I love Ronny but he still owes me money. I really hope he someday gets on the straight and narrow.

[@sidwalker6902]

I don't own a snow blower nor a sticker that says R*TEK but I'll watch the video anyway.

[@garysgarage3669]

I wish everyday was sunday!!

[@brentkelly5445]

My newer 3650 died on me. I thought the gas was empty and filled it but it won't go. I have 2 of them and swapped around the plug(good) the carb (good) so thought it was the electrical. The machine was surging before it died. I tried continuity on the 2 switch terminals thinking I would get it in the ON position but I got continuity in the OFF position. I guess that is correct? based on your kill explanation? So is there a way to know if it is the coil? Can you take the plug out and see a spark if you spin the wheel?

[@pattayperformance]

Single stage snowblowers remind me of working on vans. 10lbs of poop stuffed in a 5lb bag! 🦅🤙🏻🔧🇺🇸

[@ryanlukas9382]

Hopefully you can give me a tip. I put the ignition chip in my stihl 031 got rid of the points, saw runs good starts easy but will not rev past 5500 rpm .. brand new carb and intake boot replaced, cleaned everything new filters. Still no luck

[@jamesclement6122]

I have an rtec with a different coil any idea what I could use? Maybe it was an older model..

[@carlmiller1034]

Awesome tear-down DIY video, Taryl! Looks like the break-spring is missing or broke, as the paddle blades were free-spinning after handle-bar disengagement. Love working on these Toros!! Well done sir, well done!!!

[@brucel.6078]

Thanks Taryl and co. Whew, snowblowers are a pain in the butt!!!!!

[@robkerz2610]

If been seeing you use that Milwaukee ratchet Taryl. How do you like it? How is the battery life for a 12v?

[@neilborkowicz]

Is there a separate ignition module on this 3650 or is it part of the coil? Thanks for your video.

[@williamburdon6993]

Thanks uncle Taryl , I wish I had watched this before I worked on my Toro 3650 ,I finally got it all apart and back together and she is running good , but man , it's goofy the way they put that thing together, and I don't have tentacle spaghetti fingers, so I had to use imagination to get my boltys back in. {Magnetic pick up stick.} I dropped that one gas tank bolt so many times , I thought it was possessed.

[@mkilptrick]

Another great video. Never get tired of the background music.

[@alans.4658]

I had one of these, glad I rolled it to the curb. My Toro 721R works great. This video makes me feel happy about using my curb!

[@froggerman44]

Hey Taryl, do you have a vid of doing the coil on a ccr2000? Have no spark

[@NoWr2Run]

What a PITA that is just to change the coil, did they build the blower around it ?

[@benjaminstockton3917]

You did a good job Taryl thanks for sharing

[@driver902]

Very doable ,. But looks like a pain in the ace ! Thanks for a good video.

[@petermitchell1662]

Is it likely that this new part number ignition coil 801268 would work on a Toro CCR2450 snowblower? On Ebay there is a guy selling this new P/N as fitting the Toro CCR2450. The old ignition coil on my CCR2450 is 801108. I think that this new P/n coil can be used on both Toro snowblowers.

[@intelin123]

How do you start this snowblower without the key. My key switch broke and i would like to start it without key switch.

[@MrTgpargolf]

Watching this southern most part of texas(Brownsville). Dont have snow but i have watched every John Deere 345 for sure! Hey Taryl any more videos on that 345 coming? As always i always look forward to Sunday morning Barbacoa (breakfast in Brownsville) and the newest Taryl video on the big screen!

[@alanlake5220]

Is that a 2 stroke Briggs & Scrapem

[@aaydensclockworld9231]

Is it possible to add an electric starter to one of these same exact models that don’t have an electric start on it?

[@geerstyresoil3136]

That alien 👾 tentacle fingers sound, LMAO 🤣

[@MrTfrieder]

wow, the best instructional video ever man. that's so needed. tyvm.

[@scotthunter9709]

Extremely detailed, well done video, thanks!!

[@donbrooks9851]

You mentioned that a rusted flywheel does not affect engine spark. I questioned that, because my dad was a small engine wizard like you and that was the first thing he did was clean the flywheel when there was no spark. This may sound crazy, but I saw my dad in a dream last night. He told me that a badly rusted flywheel changes the coil air gap which does affect spark and you can readjust the gap or sand the flywheel. He said he sands it personal preference.

[@walter2670]

Is that a 1/4 or 3/8 m12 ratchet?

[@tylerhoagland6352]

What is the part number for the regular one not the r tek engine ?

[@MrTrashcan1]

The successor--Power Clear 221 is worse. You need to take off the wheels to get to the bottom engine shroud bolt. Wondered why dealers were hesitant to replace the coil--found out the hard way. Needless to say, I left that bolt out when reassembling.

[@edmnich8255]

What are labor hours for that job ?

[@Titus-as-the-Roman]

That was a lot of work just to change an ignition coil on a single cylinder equipment engine. Somewhere along the way we went from an Engineer based production to a bean counter accountant one. Equipment today is made to shoot down the assembly line as quick and cheap as possible, sorry about your luck if you have to repair it later.

[@chejohnny3706]

I've got toro snow master 20 from the 80's, pretty much same. The cover removal here LOTS easier, my Tec is set up same as this briggs, as far as brackets, and carb {dont leave outside uncovered, rain gets in the carb thanks in part to that anodized plate} The tec exh is routed to the frame tube and out by the wheels, biggest improvement is the operation lever for paddles. On older unit drum/paddle turns as u turn over engine. Any Ariens customers? I need a ST524 operating cable replacemnt upfit

[@TheJuan72]

is it a coil or a magneto ?

[@aaydensclockworld9231]

Is it normal for the snowblowers to be blowing just a little bit of white smoke?

[@bobjonson3634]

Bought a snow commander...Rope is frayed...ugh. hard job ??

[@michaelfield9467]

Need to port that and put expansion chamber on to it 😊

[@brentsmith5647]

Taryl fixes all brilliant video👍

[@francislang5075]

have you any vidios on a poulan p3314 chain saw brake

[@tester2664]

Love your videos. Great content with humor. Have watched hours and hours. I'm having trouble finding reasonable priced ignition coil for a toro ccr 2000 (model 38180) part 81-0330. I think it might be discontinued. Any ideas for a substitute part number or where to find a used one? Thanks much!

[@neilborkowicz]

I had the same issue. I went to a local small engine repair shop and they offered to sell me one of their cannibalized 2000 units for $10 that had some major engine issue. They did not want to tear the thing down to remove the coil for me. I said great. Their reason for selling the unit was that no one was coming in anymore on that series with the Suziki engine so they no longer had a use for the parts. BTW The coil is still available at some service places - but if they have one the price is around $200. The unit has just gotten too old.

[@mcarroll598]

I remember working on the old Toro 2-cycle S-200’s with the Tecumseh engines. Very similar. Have to take everything apart just to get to the coil.

[@norge696]

God I HATE those things. People offer to them to me all the time for free and I decline them. they're like a glorified snow shovel.

[@mcarroll598]

@@norge696 right?! Ughhh such a pain!!

[@80SWoods]

When I was a kid, we had two S-200s and they were BARELY better than a snow shovel and when the snow was heavy it was basically ram it into the snow until it almost dies, back it up and then ram it into the snow again. Out of “nostalgia” I ended up getting an S-200 as an adult. Brings back memories, ha.

[@99andrianmonk]

Enjoyed the video. Toro snow throwers are more difficult to work on than they could be. A little better engineering to make access easier would go a long way. Design engineers need to work on the shop floor and see the "fruits" of their labor.

[@Ready-Set-WORK]

Very nice thank you

[@billkrause4585]

Okay Taryl fine job, thanks for that. Do you have a video on a 5HP Craftsman Snow Thrower coil replacement or is the job relatively that same process.

[@leeharris3061]

Pretty much the same..the coil will be under the tin cover similarly to this..i did one last year on a toro 2450..minor differences only

[@Neighborhoodgo2guy]

Hey guys, I thought in a previous video you mentioned that there's no benefit to shining up the magnet on the flywheel? I always do

[@coffeebotography]

Didn’t say it was for greater induction, it was to insure clearance.

[@robertbeatty8424]

I live in Florida and watched it! Still wanna know how to swap out a B29 Modulator...

[@butler386]

Man that is a lot of screwing around to change the coil. Maybe if I watched another 10 times it would be easier. Thanks for the information and video.

[@mzeusk13]

Looks like EZ Wurkz design on that gas tank bolt? Merry Christmas Grass Rats!

[@johnsampson6406]

Hey Taryl, is you Milwaukee ratchet 3/8 drive ?I want to get one.

[@mowers28]

Could you please put together a video of some of those special tools that the manufacturer makes for working on landscaping equipment they make it a pain to find without alot of pictures im not a dealer just a guy that likes having the right equipment for diagnosing and repairing my own equipment

[@brentsmith5647]

Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@joeortiz3455]

Thanks for the challenger shots, great lesson taryl, watch out for the hot dogs no telling how long jergenstein has been hauling them around they could give you the 1/4 mile trots !

[@richardanderson5109]

Joe Ortiz What the hell was Ronnie saying at the end of the video, couldn't make it out ?!?!?!?(the last part) ♿ 🇺🇸

[@joeortiz3455]

@@richardanderson5109 something about he had hot dogs ,ate 3 ,had 3 lefr for taryl then, it kinda bipped out im curious also, maybe it will be a Christmas gimme!

[@robertkennedy3632]

Great video Taryl 👋

[@andyk7217]

Hey Taryl, you know that bolt you put in back to front? You're not supposed to do that... that'll make the engine blow up! Only joking 😃

[@LanceGoodthrust_]

Relax Andy. It's not the space shuttle. :)

[@josephtaverna1287]

Hey taryl good morning what a great how to video on that coil some excellent tips my friend God bless you and your family p.s. flipin it all around town and there's all yours dinner

[@richardanderson5109]

Joseph Tav... *your dinnerS ♿ 🇺🇸

[@josephtaverna1287]

@@richardanderson5109 hey Rich good morning thanks for the little tid bit stay safe God bless

[@Buckswoodshop]

👍👍 we don’t get snow, but I watched anyway! 🤣

[@majorpayne5289]

Ronnie J is awesome!

[@marzgod]

I just thought I would say this at first I'm like he can't teach you any thing but I have learned so much from him I even bought taryl apparel and he threw in a sticker and a base ball card signed by uncle Andy I will buy from him again thanks taryl

[@KTHKUHNKK]

Super good mechanic

[@grantw.whitwam9948]

Great learning video, good details.

[@joejohnson7097]

Little pain in the butt to putting that coil in thanks for the video

[@handyhippie6548]

that's quite the puddle of dino juice in the carbatrator. if it was any deeper, you could go a fishin'. i guess briggs didn't think to put a chainsaw carb on it so it would run in any orientation, huh?

[@happyyardservice2914]

Wonder if sanding the coil leads would of fixed the old coil. Either way it was probably due to be replaced as it seems the owner left it out in the rain most of the time. Great video. Thank you.

[@geerstyresoil3136]

Would love to see a short block replacement on one of these...

[@twistedwrench490]

Another great one fellas

[@OutBackSmallEngine]

$15 for coil $200 for labour.😳😂🤣

[@norge696]

I doubt it was anywhere remotely close to $200

[@flunkywill2000]

Is that job worth it? Hope you charged half the value of the machine. Always something to learn.

[@sebson1500]

Greetings from Poland!

[@dannylister558]

What's the weather like in Poland? Happy you're here my friend..

[@sebson1500]

@@dannylister558 The weather is bad. It blows, it rains and it blows. I wish the snow would come back again.

[@wadebarnes6720]

I'm glad I don't live where you got to have those

[@aaydensclockworld9231]

When you said eBay is my favorite store, I started laughing. That’s my favorite store too, and I buy all mine aftermarket parts from there either that or Amazon.

[@normanschupp485]

I just did one myself same model ccr 3650

[@patrickmiller3621]

Single stages are a pain in the butt. I’ve got 5 that I’m getting back into running condition right now.

[@raycalderon6564]

You are the Man

[@peezyplayz2498]

lol i still cant get over the fact the gas cap says fuel, might as well put a sticker on it saying "car"

[@gundorethemighty]

prices for parts for these mower's are getting out of hand ... Hey Taryl Do you think if you tore apart a mower . an made a part list on what needs to be replaced every part .. i bet the sum come out more then what you paid for the mower

[@jasonwb6884]

A coil (and parts) for a Toro with that Suzuki 2 stroke engine are expensive also. But those old Suzuki 2 strokes seem to be very desirable. If EPA laws weren't so strict in the USA, these parts would be a lot cheaper. I don't think Suzuki even makes parts anymore cause they no longer supply 2 stroke engines. Same story for an old Wisconsin Robin (now Subaru) 2 stroke engine.

[@andyhamilton8940]

Taryl forgot to mention to take your time and use extra care when disassembling like he did.