Eastonmade; 40C Processor Reveal. This Will Change Firewood Machines Forever!

  Рет қаралды 11,833

Eastonmade Wood Splitters

Eastonmade Wood Splitters

Ай бұрын

Thanks for all the feedback and support folks. It's very much appreciated. It's great that we are building such a strong community around our products where everyone can share their ideas and thoughts. Hit the like and SUBSCRIBE button if you haven't done so yet and I'll keep you in tune with what's going on in the firewood industry. Hope to see you all on the next one!!!
Give us a call for more information!!!
613-812-3213 Log Splitter Sales/Service
Check out these awesome KZbin Channels!!!
Like our videos? Check these guys out!!!! If I missed you and you want your channel on the list drop a comment below and I'll add it on the next video.
Eastonmade Ultra
Glenn @oldschoolmillenial / oldschoolmillennial
Chris @inthewoodyard / inthewoodyard
Joe @joesfirewoodvideos / joesfirewoodvideosii
justin @lifesapprentice / @lifes_apprentice
Eastonmade Axis
Buckin billy @buckinbillyray / buckinbillyraysmith
Joe @ohiowoodburner / @ohiowoodburner
Adam @hometownacres / hometownacres
mike @KNLfirewood / @knlfirewood
Gord @gpoutdoors / gpoutdoors
Dan @armsfamilyhomestead / @armsfamilyhomestead
Brittany and Francis @BandFFirewood / @bfoutdooradventures
Neil @neilkochdigdriveDIY / @digdrivediy
Eastonmade 5-11
Gord @GPoutdoors / gpoutdoors
Eastonmade 9-16
Ben @survivingcountrylife / @survivingcountrylife7069
Paul @williamsonridgeoutdoors / williamsonridgeoutdoors
Eastonmade 12-22
Harry @thedriftlesshomestead / thedriftlesshomestead
Chuck and Deb @ironandoaksawmill / ironoaksawmill
Brade @savagefirewood / @savagefirewood
Reuben @earthandbloom / @earthandbloom
Todd @struckacordfirewood / @toddpac1
Eastonmade 22-28
Gord @GPoutdoors / gpoutdoors
Doug @offgridwithdougandstacy kzbin.info?searc...
Eastonmade 22MB
Chris @inthewoodyard / inthewoodyard
Eastonmade 48C
Kevin @skidderkev / skidderkev
HTTPS://www.eastonmadewoodsplitters.com
#Logsplitter #firewood #logging #treecare #arborist #chainsaw #sawmill #forestry #homesteading #offgrid #heavyequipment #firewoodprocessor #logger

Пікірлер: 123
@InTheWoodyard
@InTheWoodyard Ай бұрын
I LIKE IT A LOT!
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Almost like it was built just for you lol
@BertsCustomCuts
@BertsCustomCuts Ай бұрын
It doesn't look like Chris could break this one.
@bwillan
@bwillan Ай бұрын
@@BertsCustomCuts Careful, Bert. Chris may take that as a challenge. LOL🤣
@BertsCustomCuts
@BertsCustomCuts Ай бұрын
@@bwillan yup then I'll fix it.
@jessejones9830
@jessejones9830 Ай бұрын
Lol yep for sure get one Chris
@WhiskeyRiverTradingCo
@WhiskeyRiverTradingCo Ай бұрын
The fully automated tease in there has me more excited than I should be 😂
@ohiowoodburner
@ohiowoodburner Ай бұрын
The 40C looks AWESOME Andrew. Congrats to you and your team. I LOVE the innovation and leveraging technology. This is the type of machine our industry has been asking for...a machine that can take larger logs down to smaller splits ideal for EPA stoves, bundle wood etc.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Thanks joe! Really appreciate the feedback.
@nicholisking9272
@nicholisking9272 Ай бұрын
Joe needs some japa competition for some comparison videos;)
@cliffjenkins6419
@cliffjenkins6419 Ай бұрын
Crikey Joe, imagine having to stack all the wood that machine could split in a day! What a weapon!! Fantastic to watch though, but the Japa is more than I could handle I think. Cheers from HB NZ
@jessejones9830
@jessejones9830 Ай бұрын
I'll prob never be able to own one but if this ever makes its way to tn in my region,it would completely change everything down here
@lyleharkness-rv5vf
@lyleharkness-rv5vf Ай бұрын
Great machine 👍 It shows that your design team really delivered on this one. The only things missing are a camelback hydration system and a urinal so you never have to step away from the machine 😂 Seriously though - great job, can't wait to see more of this machine and to see it in person
@aldredske6197
@aldredske6197 Ай бұрын
Hi Andrew!!😀😀 You really seem to have her dialed in. The only thing I see wrong is if your noses itches ,production comes to a halt. LOL!!🤣🤣 GOOD JOB BUDDY!!👍👍 Logger Al
@thefirewooddoctor
@thefirewooddoctor Ай бұрын
Then I'm screwed during tree pollen season.
@obiorah1
@obiorah1 Ай бұрын
40C is an Incredible Machine the design is much better with 2 joy sticks, The Skid steer Grapple Attachment is Nice for Customers who are in the Tree Service Industry Stay Safe in Canada,
@wshauck9527
@wshauck9527 Ай бұрын
A BIG WOW> What a processer.
@mikehauser9385
@mikehauser9385 Ай бұрын
Chris from In The Wood Yard could definitely make good use of that machine!
@WilleysFirewood
@WilleysFirewood Ай бұрын
I’m very impressed. This is what the industry has needed. I think you will do very well with this machine. I just may have to look at new instead of used now. This machine is a game changer!
@kennethcarlson8713
@kennethcarlson8713 Ай бұрын
That would look really nice in my yard
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
What is your subscriber count?
@kennethcarlson8713
@kennethcarlson8713 Ай бұрын
@@jakebredthauer5100 I don't have a KZbin channel
@GPOutdoors
@GPOutdoors Ай бұрын
That is a work of art. Makes me want to start selling firewood. Cheers and congrats Andrew! Love the log grapple too. :)
@adrianphillips6238
@adrianphillips6238 Ай бұрын
Hi Andrew, you make incredible splitters and should be very proud.
@Z-Bart
@Z-Bart Ай бұрын
Looks like a joy to run Andrew! I say job well done.
@WestwayFirewood1313
@WestwayFirewood1313 Ай бұрын
Amazing! If I wasn't almost retired, I would definitely be looking at this processor. It would be perfect for my size operation.
@765Guys
@765Guys Ай бұрын
Looks awesome, around the 25 minute mark I had to check to see if I had hit the x2 time button. It looks so smooth and fast!
@jsanchez3818
@jsanchez3818 Ай бұрын
Nice unit. Have you ever thought about adding an air compressor to the processors? I like blow ours off after using it for the day.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Not so much on the circular saws, but we do have them on the bar saws
@dereksstuff8395
@dereksstuff8395 Ай бұрын
That really is a great machine. I think that would be perfect for my woodlot. You guys have got the market
@TCsOutdoors1
@TCsOutdoors1 Ай бұрын
The 40c with the 16 way is a moneymaker for sure!
@mountaintopoutdoors
@mountaintopoutdoors Ай бұрын
That is a pretty smooth running machine. Great job team.
@cliffjenkins6419
@cliffjenkins6419 Ай бұрын
WOW, and it seems so easy. Lovely bit of kit Andrew,and what a great motor. Excellent design.
@Gavin_outdoors331
@Gavin_outdoors331 Ай бұрын
Looks very nice it looks way different from when it was at Bunyan could also be nice to have a seat to sit on
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
I need something to just back up to (assisted standing).
@fralin1966
@fralin1966 Ай бұрын
What a Beast Im mean come on this is pretty darn sweet !
@NeighborlyHomestead
@NeighborlyHomestead Ай бұрын
That is a sweet machine! You guys did a nice job! - Tim
@LeBlancfirewood
@LeBlancfirewood Ай бұрын
Wow that thing is awsome can't wait to see it friday
@ericbrinson9741
@ericbrinson9741 Ай бұрын
You should build a road legal gas powered log loader trailer on 7 ton axles similar to Wallensteins 115 model
@irv2690
@irv2690 Ай бұрын
I second this!
@craiglange1781
@craiglange1781 Ай бұрын
Nice job on the updates Andrew. That is a sweet looking machine.
@John_Ridenour
@John_Ridenour Ай бұрын
Wow!! Amazing machine!!
@anthonyspadafora1384
@anthonyspadafora1384 Ай бұрын
Beautiful piece of equipment!
@adirondackwoodsman
@adirondackwoodsman Ай бұрын
Very nice Andrew, can’t wait to see it in VT.
@SimmingtonSeasonal
@SimmingtonSeasonal Ай бұрын
Beautiful piece of machinery man!
@beenthere940
@beenthere940 Ай бұрын
The processor runs exceptionally well on its own with minimum operator input. How long do you think it will be before someone gets bored just standing there and decides that it will run on its own and tapes off the triggers? First, they'll bring a chair to sit and watch, then they will start loading the deck while it's running, and finally they will leave it running and come back to check on it once and a while. Just like Tesla cars are not totally autonomous you are always supposed to have your hands on the steering wheel. Quite the machine.
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
Oak Farm Firewood channel.
@davidevans474
@davidevans474 Ай бұрын
Looks like a nice machine 😊
@timroberge1498
@timroberge1498 Ай бұрын
I just bought the tickets to the Logger Expo in Vermont!
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
See you there
@Growing-Our-Retirement
@Growing-Our-Retirement Ай бұрын
A little 38 special sounding music for the 40c!
@fxpestoperator5527
@fxpestoperator5527 Ай бұрын
Top Notch ALL THE WAY Brother Andrew!!!!!!!!!!!!!!!!!!!!!!!!!!😃
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
If I remember he wanted to make a less expensive model.
@fxpestoperator5527
@fxpestoperator5527 Ай бұрын
@@jakebredthauer5100 Awesome!!!!
@SkidderKev
@SkidderKev Ай бұрын
Machine is looking good Andrew. Really have it dialed in now. Grapple turned out really nice too!
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
The grapples nice, but nor near as nice as the skidder kev special!
@SkidderKev
@SkidderKev Ай бұрын
@EastonmadeWoodSplitters hopefully you don't come after me for a patent infringement 🤣
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
@SkidderKev i have the funny feeling that we wont have to 😀
@BertsCustomCuts
@BertsCustomCuts Ай бұрын
The few things I see is to make lighter go to a 2 strand deck and shorten frame for the guys that get 100in logs like Chris.
@skeets6060
@skeets6060 Ай бұрын
Ya done good boys,, yep ya done good
@grantsinclair4278
@grantsinclair4278 Ай бұрын
Well, I suppose if I ever wear my Axis out...lol Don't see that happening anytime soon. It's a tough piece of equipment!
@1squirreldog
@1squirreldog Ай бұрын
I would love to rent one for the weekend set up for bigger wood .
@user-rh1ec6ep5x
@user-rh1ec6ep5x Ай бұрын
Yeah, but does it time travel. I bet you haven’t thought of that ? Everything else looks awesome
@outdoorswithlarryrobin
@outdoorswithlarryrobin Ай бұрын
Hello Andrew, Its a beautiful machine, and simplicity rules👏🪵🇺🇸
@BertsCustomCuts
@BertsCustomCuts Ай бұрын
Looking good. Can you drop next log on infeed when in auto mode?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
No. If its in auto mode it locks out all the other functions other than the wedge height
@iangregory5452
@iangregory5452 Ай бұрын
This has to be one of the smartest machines yet. So many features that make it suitable for the European market, especially the operator presence system. The auto feature is great, I think you have knocked it out of the park with this machine, of course if you had one just lying around and wanted to send it over to me……..
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
Too heavy to ship.
@iangregory5452
@iangregory5452 Ай бұрын
@@jakebredthauer5100 it fits inside a 40’ container so not particularly difficult
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
@@iangregory5452 If you are going to ship something it should be high quality, not an outdated clunker.
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
@@iangregory5452 Palax 750c has automatic wedge height adjustment. 2.2 second cycle time. Doesn't weigh as much and is probably cheaper. 540 Rabaud has the side-puncher type splitter.
@user-rg6fp4bl1t
@user-rg6fp4bl1t Ай бұрын
It could use a good comfortable seat.
@smorefirewood
@smorefirewood Ай бұрын
We should see you in Vermont. The processor works pretty slick. 75hp to run that saw is what the saw shop told me I would need to run a 54” saw So I guess they were correct. I sure wish I was on the other side of these innovations, meaning in the shop. I do my best designing and engineering in the shop with a scratch pad and a welding table and soapstone. I think I will be in Vermont on Friday. I will share a couple nuggets of wisdom with you there.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Looking forward to it!
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
slasher blade?
@smorefirewood
@smorefirewood Ай бұрын
@@jakebredthauer5100 more of a buzz saw blade. This is much narrower kerf
@jamesminard1867
@jamesminard1867 Ай бұрын
What's on the skid steer Sir ?
@waynetharp
@waynetharp Ай бұрын
All of the new innovations are just awesome, but Skidder Kev is sure gonna miss his heat and AC!!😢 Is the next step in the design of this processor getting the operator station back enclosed from the elements again? Having the station separate from the unit, besides plug in go would sure take all the bouncing and vibration out of operation as well!👍
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
You could design one and market the plan through Eastonmade.
@Opinionatedguy1989
@Opinionatedguy1989 Ай бұрын
24 ton is fine with the softwood we have in bc.
@jamesminard1867
@jamesminard1867 Ай бұрын
I should have watched till the end Lol
@EverythingElliott
@EverythingElliott Ай бұрын
2:30 are we just going to ignore the eastonmade grapple in the background?!
@EverythingElliott
@EverythingElliott Ай бұрын
Guess I should have just waited and continued to watch...that's what I get for jumping the gun
@richukfirewoodprocessing7108
@richukfirewoodprocessing7108 Ай бұрын
For the fully auto system have you considered a remote controlled system so the worker can still move about and do stuff and still be able to keep an eye on the processor? Its def a mod I would do the second its out of the warranty.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Yep. It could easily be done now. Biggest issues being operator safety.
@thomasmalloy900
@thomasmalloy900 Ай бұрын
Make control panel adjustable. I think it might interest other people.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
It is. I did pass over that
@nicholascooper1193
@nicholascooper1193 Ай бұрын
Automation!
@neilmeyers5519
@neilmeyers5519 Ай бұрын
Andrew, do you have any plans to build a smaller processor similar in size and price to a Timberwolf or Range Road?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
We will lilley have a bar saw in the 60-70k range by the end of the summer. Be based off the bells 2000 chassis
@briancartier8711
@briancartier8711 Ай бұрын
I’m looking at the auto and when u let off them it all stops but that’s a good feature but can be bypassed very easy by taping the triggers
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
I dont think it would be really necessary. Its pretty natural to just grab both controls
@steveallison7940
@steveallison7940 Ай бұрын
Nice processor, but how would it do with hardwood? Like a Pin Oak with some knots.
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Pretty good. You can upgrade the splitter to be the same as our larger models
@noeljbenoitii5740
@noeljbenoitii5740 Ай бұрын
How do you discharge the cookies?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
You have to reach into the chamber and remove them or pull them off fhe conveyor when they go by
@mikestevend1029
@mikestevend1029 Ай бұрын
What do you do with all the firewood you produce while testing all your amazing machines?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Give most of it away to the employees
@buckinfirewood
@buckinfirewood Ай бұрын
You guys seem to have that dialed in.. the double infeed chain is a great way to eliminate the F..ery... I was thinking that for my little processor a couple weeks ago. Have you thought of a log optimization feature?? Measuring the length of the log and making every piece the same length to eliminate the end cut..
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Havent got into any kind of optimization with it. I think it would be kinda tricky as most guys what the wood length exact
@buckinfirewood
@buckinfirewood Ай бұрын
@EastonmadeWoodSplitters most firewood suppliers I know would rather have an end cut go to the customer... when you start hitting the bigger numbers the waste becomes unmanageable.. I myself would rather send the ends to customer but have some control a bit that it looks more like firewood not garbage .. maybe something for later.. if you measure the waste from a log I'm sure the value of selling it at the cost of a facecord at 150 is much more beneficial than selling at 50 bucks a truck load...
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
@@buckinfirewood thats a great point
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
​@@EastonmadeWoodSplitters It is about time for a rebellion against the 16 inch standard. Shorter pieces: 1. split easier 2. dry faster 3. are more adapted to machine manipulation 4. burn better 5. fit smaller stoves More sawing. It is not clear which would be more expensive per cord. I suppose your thinner saw blade saves on horsepower requirements. I always thought the circular saws raising all the way was very wasteful. 40C is the remedy (and saw teach). You did not mention log size capacity. I suppose, 18 inches.
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
​@@buckinfirewood What about a compromise? Cut some to the standard length and cut the last piece in half?
@TheGearDriven
@TheGearDriven Ай бұрын
Hey Eastonmade team, I have an incredible idea for a full size processor such as this. How can I contact you privately?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Send an email to gage. Hes our main engineer gage@eastonmadewoodsplitters.com
@paullandry4031
@paullandry4031 Ай бұрын
How often do you have to sharpen the saw ?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Thats yet to be determined. But i would suspect you would get a season out of it without much intervention
@bungiemia
@bungiemia Ай бұрын
How do you pull out a rejected piece?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Theres a door that flips open at the splitter. It is a bit of a pain, but we need to have the gaurding there
@bwillan
@bwillan Ай бұрын
How long would you expect the saw blade to say sharp? Is there an easy way to sharpen the blade? How much to replace a blade when Skidder Kev cuts through some steel? 😂
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
It will stay sharp as long as you dont hit anything hard. You would send this unit away to a saw shop to get re tipped
@Drop_N_Chop_LLC
@Drop_N_Chop_LLC Ай бұрын
What's the price on this? To ohio usa
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
Right around 130k. We have it up on our website now www.eastonmadewoodsplitters.com
@John_Ridenour
@John_Ridenour Ай бұрын
@@EastonmadeWoodSplitters that's USD or Canadian?
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters Ай бұрын
@@John_Ridenour thats usd
@randywilson6869
@randywilson6869 Ай бұрын
Why not self leveling jacks instead of manual? Little man lifts has them so it couldn’t be rocket science
@jakebredthauer5100
@jakebredthauer5100 Ай бұрын
cost
@killinskindlingfirewood1851
@killinskindlingfirewood1851 Ай бұрын
Smooth, fast and easy. Awesome. Great job Eastonmade! Exciting to watch and more exciting to run. 🪵👍😎
@johncollins7698
@johncollins7698 24 күн бұрын
Can you purchase this in Canada..
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters 24 күн бұрын
Yes we build them in perth ontario. Our phone number is 613-812-3213
@EastonmadeWoodSplitters
@EastonmadeWoodSplitters 24 күн бұрын
Thanks for having us joe. We had a blast
Firewood Processor | Blacks Creek Innovations
13:21
Tony's Tractor Adventure Homestead
Рет қаралды 214 М.
Ep28 sawing poplar fence boards on the LT35 woodmizer
15:48
Green River Sawyers
Рет қаралды 320
Smart Sigma Kid #funny #sigma #comedy
00:19
CRAZY GREAPA
Рет қаралды 6 МЛН
Watermelon Cat?! 🙀 #cat #cute #kitten
00:56
Stocat
Рет қаралды 25 МЛН
Please be kind🙏
00:34
ISSEI / いっせい
Рет қаралды 40 МЛН
They RUINED Everything! 😢
00:31
Carter Sharer
Рет қаралды 25 МЛН
Eastonmade; NEW Axis SHO "Super High Output" Vertical Splitter
19:59
Eastonmade Wood Splitters
Рет қаралды 22 М.
Eastonmade; BIG MONEY, Little Pieces.  Small Pieces of Wood With Custom 16 Way Wedge
13:55
Eastonmade Ultra splitting Walnut with 4 way wedge
13:56
Ben's Firewood
Рет қаралды 1,7 М.
I Rented a Firewood Processor For 8 Hours (2022) - Homeowner Review of Dyna SC-16
25:10
Neil Koch: Dig-Drive-DIY
Рет қаралды 2,3 МЛН
Was This A Good Idea?
30:37
Out of the Woods
Рет қаралды 48 М.
The Most Compact Firewood Processor I've Ever Seen
6:45
Woods Tree Farm
Рет қаралды 6 М.
Cord King M18-20 one year review - 066
31:12
Millstone Firewood
Рет қаралды 8 М.
🪄✨️He Got A Magic Can Of Sprite😃👍🤠
0:33
BorisKateFamily
Рет қаралды 14 МЛН
When Your Chiropractor Owns a Cyber Truck
0:36
Mini Katana
Рет қаралды 24 МЛН
Kitten Party After Exhausted Mother Cat Meltdown #funny #catlover #cuteanimals #cartoon
0:32