EASY Camp Chairs | Beginner Woodworking Project |

These easy FOLDING CAMP CHAIRS were one of the first woodworking projects I ever made. You can make them quickly, with just a 2x10, and they are surprisingly comfortable!
With a 2x10x12, you will have the perfect amount of lumber to build two of these camp chairs. Let me know in the comments what you think about these chairs!
Like this video? Check out these WOODWORKING VIDEOS...
Beginner Cutting Board: • Beginner Cutting Board...
End Grain Cutting Board: • How to Make End Grain ...
Coasters: • DIY WOODEN COASTERS | ...
Scrap Wood Projects: • 7 Scrap Wood Ideas | #...
Cutting Board with Feet: • How to Make a Cutting ...
✅Subscribe to the channel here: www.youtube.co...
See Links below for products and tools used in this video🧰
Jig Saw: amzn.to/3rUkdhU
Milwaukee Drill: amzn.to/4715aBA
Bosch Sander: amzn.to/474680h
Bosch Router: amzn.to/409LARM
Round-over bit: amzn.to/3Md3Fsm
Solo Stove: amzn.to/46wSCBA
Here are Amazon link for video equipment I used in making this video
Gimble: amzn.to/3tzafmj
Mic System: amzn.to/490VfxX
External Hard Drive: amzn.to/3tsQuNE
As an Amazon influencer, I profit from qualifying sales, which helps me bring you more helpful woodworking content.
Thanks for watching!
#woodworking #firepit

[@Ben_Grimsley]

Want to see a video on building a bed swing? Watch it here: kzbin.info/www/bejne/r6ilfJJ_ZdqebZo

[@myronflowers3193]

You’ve inspired me to turn my outside barn into a woodworking shop. I’ve had 4 brain surgeries and now looking for something to occupy my time. My wife is on board so I’m excited to get started and possibly make a little side hustle money. Thanks for the inspiration!

[@exex480]

Please do more simple projects like these. You explain everything thoroughly yet simply. Love the channel 🫡

[@Ben_Grimsley]

Thank you so much! This means a ton!

[@darrellburton3949]

Did you ever hear of the outsides of the seat breaking off? The grain direction may make it weak. Nevertheless it is a great idea and I will be making them. Subscribed...👍👍

[@Ben_Grimsley]

I have made probably 20-25 of these chairs and I have never had one break on me. You could use wider boards, but then you are increasing the weight of your chair. Thank you for watching and thank you for the sub!

[@darrellburton3949]

@@Ben_Grimsley Thank you for replying and you're welcome.

[@thescientisthorse]

Nice and simple idea. Could word for beach purposes as well. Thanks mate.

[@Ben_Grimsley]

Of course! Thanks for watching

[@davebender8901]

We understand you can't count past 2... You are an Auburn fan! Just kidding. Great idea. Simple, yet effective!!

[@Ben_Grimsley]

Haha Auburn fans can at least count to two because we have two mascots 😂 Thanks for watching!

[@lawrencemontez5186]

Fantastic video man, keep it up 👍 your doing a great job.

[@Ben_Grimsley]

Thank you! This encouragement means a ton!!!

[@Derwood_Creations]

How much are you selling them for?

[@Milton0526]

Is this hardwood or soft?

[@Ben_Grimsley]

Softwood. I think this was pine from a big box store

[@oldguyhustle5941]

What is the stain/finish you use on this project?

[@Ben_Grimsley]

I use a Cabot Stain. I did not apply a clear coat after that. Hope this helps!

[@nikkiisblessed]

After you strained food you add a polycyclic or protectant?

[@melodywilson5255]

Hey mmmmm a new subscriber! I never seen this before. Love the simplicity! Curious about the possibility of making them taller for people with bad knees like me. Would you need to stick with the same angles for stability? Can this be done?

[@Ben_Grimsley]

Thanks for watching and subscribing! I am sure this can be done, but I would have to sit down and figure out the measurements!

[@nikkiisblessed]

Hoping you can provide measurements. I was thinking the same thing. I have a bad knee too

[@travisparks4945]

Nicee How Much Weight Can It Hold???

[@Ben_Grimsley]

That is a great question! I am not sure, but I have never had one break on me.