Easy DIY Catback Exhaust System: Assemble with Off-the-Shelf Parts without Welding

  Рет қаралды 29,063

Crooked Mustache

Crooked Mustache

Күн бұрын

Пікірлер: 42
@OrangeCounty92
@OrangeCounty92 Жыл бұрын
This is impressive. Built your own exhaust system. Measurements were 95% on point.
@banana_but_pronounced_bananya
@banana_but_pronounced_bananya Жыл бұрын
Nice! I've been thinking about doing a muffler delete on my own just as a fun side project. Very informative
@bdurushia
@bdurushia Ай бұрын
Grinder setup for cutting the pipes is low key genius.
@claudiomatricciano3284
@claudiomatricciano3284 3 жыл бұрын
Man you killed it!!!
@tjkilshot
@tjkilshot Ай бұрын
Just saved me hundreds on the turbo kit! I'll just add some tiger wrap and high temp gasket!
@CrookedMustache
@CrookedMustache Ай бұрын
Add an EGO Leaf Blower and you're set! 🤣
@Hogib35
@Hogib35 3 жыл бұрын
Like it man.. really informative.. I've been dieing to do it to mine.. in fact I did mine and got the wrong fitting etc do to the fact I cut the mufflers in a angle where I would have to go to a welder,but I'm Def going to keep giving it a try. I'm all about diy. It's been a couple months just sitting Luke that.. I still have the 45s and the 90s and straight pipes and finally got a cutter. To make it fit perfectly t. But bro the e haust came out super sweet. Great job.. subscribed and liked
@benjaminhernandez698
@benjaminhernandez698 3 жыл бұрын
This is a great video. I was iffy about doing this to my b8 a4 but now I see it's possible.
@CrookedMustache
@CrookedMustache 3 жыл бұрын
We weren’t sure at first, but after some rough measurements and a lot of staring at pictures of the underside of this car with aftermarket systems installed, I started laying out the path in the aisle of the store for one side and just doubled the parts for the other side. If you’re thinking about DIY’ing it over buying a system, I’d say go for it. Even with the name brand magnaflow mufflers it was still half the cost of used systems and a quarter of what it would cost new!
@benjaminhernandez698
@benjaminhernandez698 3 жыл бұрын
@@CrookedMustache oh yea definitely alot cheaper. Thanks for the info and I will definitely go the route you took. Does your a6 still have the cats? I'm getting ready to remove mine soon and install my downpipe I've got on ebay soon. And I'm surprised the quality of the downpipe from ebay and good welds too.
@CrookedMustache
@CrookedMustache 3 жыл бұрын
Glad to hear it, if I could inspire one person to pull the trigger on their DIY project, that’s good enough for me! Downpipes and a larger exhaust are coming, probably once we replace the 200k mile turbos (that shockingly seem to be holding together). Right now it still has stock downpipes and cats. One of the perks of the modularity is since I’ll never go larger than 2.5” per side, the mufflers don’t have to be replaced - just the pipes connecting them to the rest of the exhaust. Hit me up on my IG @crooked_mustache and let me know how it goes. I’d love to see before/after pictures of your car.
@dombardelli3269
@dombardelli3269 2 жыл бұрын
Did something like this on my Jetta full cat back straight pipe no welds
@BigDee-wf3qc
@BigDee-wf3qc 3 жыл бұрын
Very nice job bro sounds great
@williamdon3442
@williamdon3442 2 жыл бұрын
Looks good dude
@gsb9083
@gsb9083 2 жыл бұрын
u have inspired me to do my own exhaust man. LETS FKN GET IT
@cubanita0587
@cubanita0587 4 жыл бұрын
Great video.
@CrookedMustache
@CrookedMustache 4 жыл бұрын
Thanks!
@sethbingo
@sethbingo 3 жыл бұрын
Thanks for the helpful video! How has the exhaust held up? Any issues or problems?
@CrookedMustache
@CrookedMustache 3 жыл бұрын
Zero issues, checked all the clamps after a few heat cycles an everything was fine. Still running it this way today.
@Mike-we3rb
@Mike-we3rb 2 жыл бұрын
What about all the air right seals you need. Air is seeping out everywhere from the band clamps
@Dannymclovin
@Dannymclovin 5 ай бұрын
Your better off buying the eBay exhaust builders kit there 90 dollars and have enough pipe to make a turbo kit or enough to make a few exhaust systems that are pre bent as well just a heads up plus they're slip fit
@tylerparker3024
@tylerparker3024 3 жыл бұрын
I gotta tell you. It look awfully warm there to have white smoke coming out of your exhaust. Head gasket?
@CrookedMustache
@CrookedMustache 3 жыл бұрын
@Tyler Parker Hmmm, never took temperature into account or condensation, it was morning. She has 200k miles and I’d be shocked if they weren’t the original turbos, which need to be replaced, Im sure the oil seals are tired. The smoke burns of after a a few mins of idling. No water in the oil or vice versa. Thanks for the comment.
@demarioconey5554
@demarioconey5554 3 жыл бұрын
It’s new, it’s the engine is getting used to the new piping. Same smoke happened to my G35x, putting on the headers and the new exhaust system.
@austingrills728
@austingrills728 3 жыл бұрын
@@demarioconey5554 it’s also everything inside the exhaust getting burnt up lol like just getting used to the temperature
@dani3l594
@dani3l594 3 жыл бұрын
It woulda been so much better to take it to a shop and pay them to weld it on and welding the hangers woulda been much better and stronger.also 1 more tip id suggest using the c clamp on the mufflers not the band clamp and use a impact wrench to tightn it or if u dnt have 1 use a wrench with breaker bar so your muffler dont rattle off over time But good video and good job doing it yourself
@cameronjohns3169
@cameronjohns3169 4 жыл бұрын
any updates on the corolla? I just found out about it and was disappointed to not see any recent vids on it :( but anyways nice vid..
@CrookedMustache
@CrookedMustache 4 жыл бұрын
Hi Cameron, thank you for the interest! I have some bad news/good news on the corolla. During my hiatus, the Corolla was not being used and I felt that the car could do good for someone who needed reliable wheels to get around town. I ended up selling it to a gentleman I met who was getting back on his feet for less than the parts I put into it. It went to a good home :)
@Marcosvlogs847
@Marcosvlogs847 3 жыл бұрын
Nice
@jordanscott6410
@jordanscott6410 2 жыл бұрын
May I ask how much did this all cost to do this way.
@CrookedMustache
@CrookedMustache 2 жыл бұрын
@Jordan Scott, at the time (material cost could’ve gone up) it was about $350 with the most expensive items being the mufflers.
@galactic904
@galactic904 3 жыл бұрын
Sorry guys, but I'm living in a 100-year-old vehicle mod mind-set. The Engine patent we are driving around with is over 100 years old. Exhaust system metal pipes from hell, haha. I can't wait for 2024, more new vehicles will be manufactured with today's new patents.
@darrenjackson795
@darrenjackson795 3 жыл бұрын
Are you running any cats?
@CrookedMustache
@CrookedMustache 3 жыл бұрын
The factory ones (200K miles old though)
@brianrussell1565
@brianrussell1565 Жыл бұрын
Smoking .probably the new pipes
@69bettyhann
@69bettyhann 2 жыл бұрын
Oils a little rich.
@jasonosorio4801
@jasonosorio4801 2 жыл бұрын
This shit hurt my eyes
@masumreza840
@masumreza840 3 жыл бұрын
you should care about environmen...so much gasses, u need cat
@CrookedMustache
@CrookedMustache 3 жыл бұрын
@Masum Reza Stock cats were never removed there still on, they are integrated into the stock downpipe. Although in Florida we don’t have emissions testing and it’s common for people to do a cat-lessTurbo-back exhaust
@masumreza840
@masumreza840 3 жыл бұрын
@@CrookedMustache then Florida govt should look into these issues... pollution doesn't obey borders....You are saying you have cats but I think you were having free flow while making video, its ok but little suggestion don't go outside releasing massive harmful gasses
@yeahyourerightheresmystupi5352
@yeahyourerightheresmystupi5352 3 жыл бұрын
@@masumreza840 fuck the birds I get better mileage with the cats removed
@GOIN-CRAZY
@GOIN-CRAZY 2 жыл бұрын
Trolls trying to get a reaction..I thought you did a good job, but yes on the impact. Sounds great!
DIY Exhaust! - Is it Worth It?
19:37
Donut
Рет қаралды 3,1 МЛН
I tricked MrBeast into giving me his channel
00:58
Jesser
Рет қаралды 24 МЛН
Человек паук уже не тот
00:32
Miracle
Рет қаралды 2,5 МЛН
Wait for the last one 🤣🤣 #shorts #minecraft
00:28
Cosmo Guy
Рет қаралды 18 МЛН
How to Build your own Custom Exhaust - The EASY DIY Way
11:28
Eastwood Company
Рет қаралды 66 М.
Super Easy MUFFLER REPLACEMENT with NO WELDING
16:18
Big Red Media
Рет қаралды 101 М.
TFS: How to Make X Y H Pipes and Transitions
25:01
The Fabrication Series
Рет қаралды 634 М.
3 Illegal Mods That Will Make Your Car Run Better
20:51
Scotty Kilmer
Рет қаралды 3,9 МЛН
Mig welding Exhaust, Basic how to tips
10:39
Jeeping Mo
Рет қаралды 38 М.
Should You REALLY Use Muffler Tape On Your Car's Exhaust?
16:47
Repair Geek
Рет қаралды 311 М.
Cutting a Hole in Nolan's Exhaust to See How Loud it Gets
18:11
DIY 3 Inch Exhaust Muffler
9:30
GP Garage
Рет қаралды 47 М.
10 Winter Car TIPS & TRICKS you NEED to Know
14:43
ChrisFix
Рет қаралды 6 МЛН
He bought this so I can drive too 🚘💃
0:19
Super Max
Рет қаралды 2,5 МЛН
He bought this so I can drive too 🚘💃
0:19
Super Max
Рет қаралды 2,5 МЛН
инспектор ДПС ГИБДД остановил за тонировку
0:10
мощные проекты Инстаграм. TV
Рет қаралды 6 МЛН
Insane drift crash
0:59
PeopleVsCops
Рет қаралды 10 МЛН