EASY floor panel fabrication - no tape measure needed!

[@ebikeliverystable]

It takes GREAT disseplen to create that much detail. Several on KZbin are over the top with finishing the entire vehicle once without interruption of the build. No distractions just them and the camera

[@weirdmatter]

I missed the live today the Johnny and Amber Turd trial is going on! Keep up what makes you all happy. Waiting patiently to see more work on Jolene's hot rod.

[@billhoward7730]

Chad you are a sheet metal and fabricating genus. There is no one else like you. Please keep up the great work. Bill

[@cinemafx1]

It's amazing that Jolene and Chad can film these shows as they do. Props to them both. It's not easy to film uninterrupted with diolog and build at the same time. It's truly amazing!

[@ejharrop1416]

Amazing how you can think and talk about complicated things so fast. You mind must be roaring along at 200mph. Awesome to watch. Thank you, take care and peace out.

[@scottbhhalliday339]

Welcome back good to see your putting time on the flooring of the car

[@nboldrini]

I agree completely with you, Chad about concealing as much as possible and making people wonder about where it all went. When I built my car I hid the headlight, generator and signal wires through the headlight mount and inside the frame itself. Same with the rear mounted battery cable, lights and even the fuel line. Since I did 90% of the build alone I had to make sure all attaching nuts and bolts were secured from one side only. The entire car can be assembled and disassembled with one hand. I installed the engine without a hoist by use of a jack and shims. I am a believer in intimidation through modification.

[@Bigmike3406E]

Love all these projects . The more the merrier.

[@edricoddot]

Keep on keeping Jolene and Bad Chad. You guys are doing great things all the time 👍

[@ate-updesigns9186]

Love the step by step...life is bout making yourself and others happy and you both are accomplishing that...so thank you...keep on keeping on..cya tomorrow

[@tonymosca6591]

In spite of all the haters, Chad and Jolene provide the most informative car content anywhere!

[@jeffreycrossin427]

Thanks for the tour videos on Facebook. I loved seeing the cars. The one that picked you up from the airport was one of my favorite. I drift towards the 50s Era.

[@johnhamilton2574]

Glad we are back to daily content. Chad and Jolene, all the nay sayers aren’t loyal anyway. We daily watchers enjoy the chops and the detail content both. It builds the excitement for when they’re finished. We will keep watching no matter what you post. Hi Fina!!!

[@iamtomcat]

Bad Chad can make anything work ,very creative ,amazes me how he makes his own pieces

[@darwinfoster7420]

Your explanations are very helpful to the younger generation wanting to get into the building business .

[@cecilvinson1213]

Good to see y’all back. I watched the whole trip on KZbin.

[@robertsalanon2909]

The king of metal !! is the big work ...

[@darylmorgan9887]

Glad to see you both back at it Chad and Jolene. Say Hi to Jim lol. Awesome step by step advice on the floor build.

[@jimcoplan9502]

Another great lesson by Chad. Jolene is always giving us terrific videos of the process.

[@weirdmatter]

Hi Jim 👋

[@backyardbuilder1]

Great job Chad. Like watching all details of the build. Would like to see finishing details as well. I understand the ratings and income. Maybe once a week doing some additional video or a separate on the tedious steps so we could see the entire build process.

[@bossownermanager8536]

Welcome back from the car show CHAD & JOLENE lovely to see you back at it

[@macbetula6926]

I like it when you go from one project to another, it makes it more interesting 👍

[@bm0078]

Welcome home Jolene and Chad!!

[@kevinmcleod3741]

Chad and his multi color Bristol board ! Floor going in . Looks great Chad Thumbs-up 👍 and 👍 Jolene awesome content !

[@williamerickson4045]

Keep doing what you do making everyone else happy is not as important as keeping yourselves happy great content and learning lessons as always

[@johnkranz4004]

Floor is starting to be nice Glad you had a great weekend at the Show You should put a steering wheel on the Bead Rolla make it easier for Jolene

[@greggmoorman5985]

Glad you guys are back !!! Floor is looking great !!!

[@anthonynash2899]

Glad you guys are back, happy you enjoyed your trip to Ontario,👏👍🏻👍🏻🇬🇧

[@nualanet]

Old cars will almost always need some floor work... great to have the basics down.

[@bd9875]

I learn something new every time I watch. Great job guys

[@stephenewing6370]

another great video good job👍

[@charlielemmons5525]

Simple but effective and using what you have. Chad and Jolene are awesome

[@jefferybrimer5586]

Really like the way you just go at it that's what true vision is all about

[@daledean6860]

Good to see you guys back at it.

[@jjsmith2789]

Glad that your back at it.

[@quinnwarman5139]

Great to be back 👍 awesome just keeps pumping out those great ideas for the home builders

[@ronbunker5778]

I really like your teaching techniques, very easy to understand and follow, great video!

[@jeff1176]

I can see your creativity coming thru on all of your builds. I think you are building fantastic cars. Some of your creations boggle my mind. Really great stuff. Keep on building your dreams. Thank for the excellent camera work Jolene. More builds. Keep em coming please. Thank you both.

[@tjakr3869]

Appreciate all the work you all put in for us. Appreciate your candid comments most of all.

[@thomasparsley513]

You guys are Awesome, there are always opinions and comments out there that are judgmental and negative. I ask that you two ignore the negative you are inspirational and positive influences and the world is better with you, thanks and keep up the awesome videos

[@kevinhornberger4351]

I enjoy watching the creativity and passion that goes into your builds!!! Can't wait for more on the 40!!!!

[@jeffbeam4259]

Absolutely love watching you do what you love, and the joy that it brings. I bet that it would be so much fun to work one day with you in the garage

[@NewGeneration-x1z]

Hey chad I’m looking to restore an old car soon and your videos are very informative, thank you for sharing your knowledge🤘🏻

[@alanpaulick7815]

Awesomely done Chad and Jolene.

[@adriancahill3673]

Love the way you laid this out

[@roymazac2532]

Your a great teacher Chad. Thanks for the video

[@davidsimpkin1213]

Always enjoy watching you both!!!!

[@jeffreycrossin427]

Welcome back. It's great to see the process. I do the she with leather. Maje a pattern and cut the leather then sew it together.

[@marksheyworth7888]

good to see you back

[@howardmarshall5713]

great job on them panels Chad & Jolene

[@g1boy2]

Missed watching you guys. Glad to see you all doing well and back into building cool Hiltz one off cars piece by piece😉

[@eugeneemery1140]

Enjoyed this Video! Great Job Chad and Jolene!

[@paulmatott8331]

Glad you & Jolene are back , Nice show today . You make it look so easy .

[@barriecollins6838]

I think it's great the way you both make building a car look so easy but there has gotta have been a lot of thought gone into it first before you start. Keep up the great work the both of you 👍 👏

[@weathereddog7650]

Stress free fabricating.

[@cannabisticannabisticino2718]

I would have used the inside of the roll of masking tape, which always keeps the rounded corners the same. Because the outer circumference of the tape becomes smaller and smaller, using and unwinding the tape. 😉 Great job guys. 👍 Greetings from Switzerland

[@swgeorgia]

Just started watching you guys, I like the way you try to make do with what you have and explain why you do things. from SW Georgia USA

[@rickhettwer854]

Glad to see you both back and at it again. Great advice on building a new floor for the car, and simply done too. I'll soon be building my floor on the 39 coupe in pretty much the same manor. Thanks again for another awesome video Jolene.

[@michaelbristol6467]

I love it when a plan comes together. 👍😉

[@donmelvin7102]

Every tough job can be broken down to some smaller parts, making them easier jobs. Thanks for your insights here. They are appreciated!

[@hilaryyoung2449]

Hey chad I enjoy watching your shows keep up the good work

[@tjakr3869]

Your brain works so differently than mine. I realized it when you were cutting out the blue piece. Sure is cool seeing things through your eyes.

[@howquick]

Thanks for another great lesson guys 👍

[@kwikslvr73]

​good to see y'all back the project is coming along thanks for your time Chad and Jolene

[@Trevor4281]

Thanks for the informative videos you make it look easy and make me want to start a project myself 👍

[@stevemiller1212]

It was Great to meet you both in Toronto. Real people keeping it real. Love the content since day 1 .

[@williamverbeke4561]

Great job you two you make a great team!!!

[@johnboysshopofdreams4712]

Well done Chad you got me to making patterns for everything before I put it together

[@gastonrobichaud1282]

Great video now i need a cab

[@josephdowns9274]

You are a true artist and great video

[@sambrizendine6935]

The floor is going to look great 👍

[@dwolff9598]

Great show, have fun with bumper cars

[@cathyandgreg4239]

Awesome as always....very much enjoying.

[@craigalyea1607]

My buddies that build cars hide everything, you don't see a single wire under their hoods. Nice floor pan 🤙

[@kerryroach6032]

Thank you guys for all the technical tips awesome work

[@davegiebelhaus5377]

enjoy watching the different builds

[@brentonmanser7350]

nice to see you more relaxed

[@kevinjohn5410]

Giddday Mate ... Luvin the new episodes with another new build happening ...

[@timmaccowan]

Great a video. Glad to see you both back in the shop

[@hitnmiss49]

Very interesting. Now I know how it's done

[@bertjager4500]

Nice way of doing the job

[@davidtutor6763]

Love watching and learning. Thanks for the hard work you two

[@peggypatton9170]

I like see you guys build 4x4 build

[@edbrenner458]

Chad that's an awesome how you did the floor I'm going to try it next keep up the good job glad to see you back

[@FriedGarFish]

Keep up the great work

[@ronniedowdy9598]

Great job have fun at your buddy!!!!

[@mileskruse6745]

its really looking good. keep it going

[@austincrowley1228]

great job nice of u to show us how easy it is step by step keep it up thanks

[@larrybailey43]

I like how u make floors.

[@kevinbrown1549]

Awesome job!!!

[@XCHANGEDAVE]

A great adventure and a life lesson thank you very much

[@vwcoco]

Looking forward to the floorpan fabrication chad 👍

[@gordandcolleenkerr7760]

Looking forward to seeing the sructure come together with a floor

[@claudevienneau3391]

Good job Chad and Jolene keep up the good work!!👍

[@scottwebster7613]

outstanding as usual

[@donaldstacy8378]

Top notch video as always

[@waynedoll9700]

looking great good job

[@ayrshiretrikes3810]

Keep up the good work

[@markjoudrey7036]

Looks awesome.

[@annehiggins3559]

Great information thanks for sharing