EASY Gelcoat Repair with Flowcoat - Fibreglass Boat / Jet Ski

[@1UTUBEUSERNAME]

I have been doing gelcoat repairs for years. What this guy says... DO IT. He is 100% spot on with the process.

[@JetSkiCamping]

Thanks mate - glad to hear I’m not leading everyone astray! Much appreciated.

[@TheRealKalEll]

JB Weld, rattle can black, gloss clear coat = best I could do, looks almost like new: $28. Would've rather done it your way though for longevity, looks like new. Excellent work, Sir!!

[@Isaaydinphotography]

Great video You are a saver! I bought a brand new Kawasaki Jet Ski and chipped in the exact same size as on the video the bottom area, near the intake. 3 places quoted me from $2650 to $3000 for a chip smaller than a fingernail. Leaving your jetski somewhere else for 3-4 days is another problem because it is guaranteed that you will receive it with 5 new scratches all over. Thank you so much!

[@TheTechTerritory]

seriously cannot find a supplier for flowcoat... where can i buy this??

[@SoleToleCole]

Would this work anywhere on the jetski the fiberglass above the water line ?

[@pooreyorkie4478]

Hi, excellent video! Can you use a filler to thicken the gelcoat for filling larger cracks?

[@DavidTheDave]

This came up in my feed at the perfect time. I just took my Sea Doo out for the first time today and found a gouge in the hull on my return. I felt sick! Watching this reassured me a great deal. Thanks.

[@JetSkiCamping]

Glad I could help! Thanks David.

[@DesmoProfundis]

Nice. Really informative. I have an older boat that needs a lot of this work. After watching many vids on this, yours was by far the best. Others explained the difference between jell coat and flowcoat, but didn't show application. Others showed application without the explanation. Also, I enjoyed the footage of the ride, it was beautiful. Thanks for the great vid.

[@JetSkiCamping]

Wow thanks Des! Very much appreciated. Glad you enjoyed. Well I was researching, I struggled to find a complete guide with all the information so I tried to include as much as possible. Hope it was helpful!

[@YourDrawerness]

If you didn’t repair that, what’s the worst that can happen? Slow erosion from the water will eventually cause a hole? I get the need to officially repair it, but why can’t you just slap a piece of black duct tape over it and call it a day?

[@waverez3972]

Hello! Just wanted to duplicate our comment we have left under some other video about adding a 0:00 time stamp for KZbin to structure your video. Thanks for another great video!

[@JetSkiCamping]

Thanks!! Will do.

[@Flyvidz24]

Where do I buy that flowcoat?

[@connorwhitaker8068]

Hey, so I just fixed my jetski I just bought, the hull and nose of ski was cracked I re fiberglassed the whole jetski. Now onto sealing it an making it water proof. So do I need to just apply the gel coat without wax, sand it down with 800 wet sand paper then apply gel coat with wax (flow coat) and buff?

[@liljohn309]

Where can you get this stuff I have a couple little nicks on my Sea-Doo RXT I’d like to do

[@revvedupadventures]

How was the color match?

[@deplorablechump8758]

Did you order the resin in matching color? If not, what if my ski’s color is white?

[@brotherscup]

I'll overlook the fact you ride a jetski and complement you on a stellar video 😆👌

[@paulravary8656]

Really top video. Thanks for sharing!!! :)

[@christopherbryan8846]

What was the first product you used for the simple fix?

[@cmbmusicproductions1870]

From pausing it looks like Magic Ezy

[@fernandomartin624]

I cover it with a piece of nylon and tape it all over so no air is there. And stays so flat it almost no need to sand. Hard as a rock also.

[@deplorablechump8758]

Does this work for acrylic surface, buddy?

[@MySipuli]

1st layer cured fine, but now as I have put the second one after sanding, its not curing (after 3hrs)

[@grantsimsdds]

You made it look easy! Thanks for a great video😁

[@sulysaldana5867]

Seriously this video was worth watching the 20 mints. I saw a lot of video out there but none explained what gel coat is, how it cures, why your gel coat need wax and so forth. So thanks for making this video I have more confidence in doing this now.

[@benb1778]

Thank you for the video very helpful!

[@fourpipes]

Very helpful video. Thanks mate 👍🏻

[@JetSkiCamping]

No worries! Glad it helped. Thanks for the message!

[@mikesblueskyproductionsuta7634]

Thanks for a great tutorial! This helped me so much!!

[@jeffsanderson36]

Great video! Thanks

[@geovannymartinez7760]

Can you put the list of the place that you both it

[@MySipuli]

How long should you let the repair cure until hitting the water?

[@baisil33]

Hi mate. What type of 360 cam you have? And how it's turn while you driving? Help please. Thanks

[@JetSkiCamping]

I'll make a video about it but I mainly use insta360. If you watch this video you'll see my setup: kzbin.info/www/bejne/i321pod6iqiVmsU

[@cdizzle12]

Really great video! Well done mate!

[@patan77]

Kawis for the win always!

[@williamsloredo6037]

Was the gelcoat with or without wax?

[@mickthefishn]

Bloody good vid mate, thank you.

[@wreyes1753]

Where do i get these products?

[@jaimewanda]

Very helpful thank you very much!

[@rangernickbushcook]

Been talking to Ben, great work you are doing there. Would be good to catch up, got a few ideas to run past ya.

[@JetSkiCamping]

G'Day Nick. Hope all is well mate. Any idea when you'll be in QLD next?

[@yb2112]

Can you cure the gel coat with a cut up balloon tape to it?

[@MrGriffin23]

Awesome video!

[@JetSkiCamping]

Thanks Mate!

[@srileo]

Am curious about how you capture the video of yourself cruising in the water? Drone? I don’t see its shadow and speed seems to be much higher. Enjoying your channel focusing on lesser known aspects of jetskiing ownership.

[@JetSkiCamping]

Thanks for watching Shridhar. Glad you enjoy. I hope to do a future video on that topic so I won’t spoil it for you just yet.

[@louie6547]

It’s a 360 camera

[@matmanjr1]

What products did you use for this? I have a repair I need to do on my seadoo and the area along with the color are the exact same as yours.

[@JetSkiCamping]

G'Day Hunter, I purchased all the products from my local fibreglass shop - they were really helpful! Here is what I got --> 3:30. Just be aware that some modern jet ski's have composite hulls that cannot be repaired using these materials. Check with your manufacturer / dealer if unsure.

[@polymexdf69]

Great voice keeps me in focus of the video great video of course

[@JetSkiCamping]

Glad to hear it!

[@Theridingherf]

Great video 👍 this is actually very helpful. Thank you.

[@JetSkiCamping]

Thanks mate!

[@MySipuli]

How do you judge whether the fiberglass needs rework or not?

[@rogercolon1711]

Where can I purchase this kit from?

[@JetSkiCamping]

I purchased the items individually from my local fiberglass shop.