EASY: How to Build an Outboard Motor Stand - Best Design

[@5thdayadventures]

Leave a comment then CLICK HERE for the PLANS: 5thdayadventures.com/product/standplans/

[@selectrapitoxil]

Simple and usable

[@5thdayadventures]

Thanks and thanks for subscribing that really means alot to me 👍

[@cwclaypool]

The way this video was edited was great. Jump cuts to each step so there’s no fast forwarding needed. Nice work! On video and project!

[@5thdayadventures]

😊 thanks that means alot!

[@michaelwalker7961]

thank you for this, the collapsibility part is sweet.

[@5thdayadventures]

You're welcome 😊

[@waspy88]

An example of simple being best!

[@5thdayadventures]

Thanks 😊

[@michaelbramley9316]

So simple, So quick and easy to construct.

[@5thdayadventures]

Thank you 😊

[@josetrevino7386]

What a great idea! Thank you for the tutorial!

[@5thdayadventures]

Thanks ☺️

[@DennisLoney-c3y]

Just what I was looking for, Thanks

[@5thdayadventures]

You are welcome 😊let me know how it works for you👍

[@DavidWade-x7o]

Great design, simple build and compact compared to others out there. Ability to fold and store is great. My material cost was $14. Using the miter saw and setting at a 15 degree cut sped things up. Thank you.

[@5thdayadventures]

So great to hear. Thanks for sharing. Yes a miter saw would definitely make it a lot easier. 👍

[@randywonders9781]

Thank you, just what I needed.

[@5thdayadventures]

@@randywonders9781 you’re welcome ☺️ come back and let me know how it works for you 👍

[@DreamCatcherChartersKeyWest]

Great video.. Nice work.. thanks for the tips.. going downstairs to build mine now.

[@5thdayadventures]

Thanks ☺️ let me know how it works out for you.

[@belowfray5251]

Just what i need for old Starflite III, 4 cyl. Dont know hp yet. Thanks

[@5thdayadventures]

Sweet sounds like a cool motor!

[@RickTucker-b6d]

I like this design

[@5thdayadventures]

Thank you 🤗

[@tedcopple8112]

Great video!

[@5thdayadventures]

Thank Ted let me know if you build it and if you make any mods to the design. Its been super functional for me i have 2 of them currently and they sure make life easier.

[@crazyforscuba]

Great design!

[@5thdayadventures]

[@chrisjohnson2043]

Would a motor with a doel fin have enough clearance between the struts?

[@5thdayadventures]

@@chrisjohnson2043 maybe as its designed its 18” between the uprights. You could always make it wider by simply increasing the width of the cross pieces.

[@vitor053]

Great project!

[@5thdayadventures]

Thanks! Let me know if you build it and how it works for you 👍

[@franekbp]

Simple and functional. 👍

[@5thdayadventures]

Glad you like it!

[@belowfray5251]

Awesome !!

[@5thdayadventures]

Thanks ✌️

[@jarodmorris611]

A modification would be cool to allow the motor to be in a large trashcan of water for running / working on them. For just having a place to put one, this is perfect.

[@5thdayadventures]

That would be a cool addon. I usually run my stuff off a hose though that's not always the easiest with these little motors. Thanks for sharing!

[@SuperCooperville]

Great design...ive always got a couple outboards im working on... never enough space. Have you seen the price of the small outboard stands? Hard to find under $100 Thanks

[@5thdayadventures]

For sure, for the price of one of those you could build 5 or more of these! Thanks! 😄

[@DonaldWhitelaw]

Verr helpful!

[@5thdayadventures]

Thanks 😊

[@beardeddude2613]

Nice! Thank you for this. Would it hold a 40hp outboard?

[@5thdayadventures]

I think it would be fine. I weigh 160lbs and it holds me + a 25hp that weighs between 90-100lbs at the same time with no problems. You could always upgrade the hardware and add some angled bracing if you want to make sure ultimately its up to you though. Thanks for watching let me know if it works for you👍

[@belowfray5251]

I'm u a using 2x6. I think 2x4 will do the kick-out legs. 230lb motor

[@teachmetruth3539]

If I were blind I’d say this is Woody Harrelson doing some carpentry work. 🤣

[@5thdayadventures]

🤣🤣🤣🤣...😒

[@teachmetruth3539]

@@5thdayadventuresNo offense. 😂 you just kind of sound like him. Good work by the way. I think this is the best home made outboard motor stand I’ve seen…..so far.

[@5thdayadventures]

@@teachmetruth3539 none taken👍and thanks for the kind words. It's definitely worked great for me so far let me know if you come up with any ways you think we could improve it.

[@brandondavis3052]

I won’t even work for a bigger motor like a little €50.42 stroke

[@5thdayadventures]

Are you asking if it will work on large outboards? If so i don’t know that i would put anything too big on it. Thats at your own discretion. I’ve put about 300 lbs on one and had no problems anything more than that i’m not sure