How to: Outboard Boat Motor Stand - Materials needed to build it yourself

How to build a boat motor stand. Performing your own maintenance can save a lot of money and time. This video shows you the materials I used to build a very strong and sturdy stand to hold my motor while having some fiberglass repair completed on my boat.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
#bassfishing #megalive #megalivesettings #humminbird #winterbassfishing #livescope #activetarget #howtobassfish #mega360 #mega360settings #lakelanier #moneybass #humminbirdhelix #lakelanierbassfishing #fishing

[@harryhall7801]

GREAT VIDEO

[@TheSignGuy]

Thanks, excellent video. This is exactly what information I was hoping to find.

[@MoneyBass]

Thanks. Glad it helps.

[@richardhardey8793]

One the best outboard motor stands. Built for my 90hp. Works great. Thanks for sharing your video.

[@MoneyBass]

Thanks for watching. Glad it helped. Be sure to subscribe for some good fishing videos. Tight lines.

[@jebmorgan6766]

Thank you, you made it easy to follow, just finished building one, and with your material list I only had a 10 quart water bucket of the excess material when I was finished. thanks again

[@MoneyBass]

Thanks. Good to know it helped.

[@TurnII]

I was actually looking for taking bass boat off of trailer @home...and came across your video. Nice work with the explanation 👊🏾👌🏽

[@MoneyBass]

Thanks for watching. Please read some of the comments for additional suggestions.

[@d.fer5]

Awesome video and layout. Thanks!

[@MoneyBass]

Thanks for watching and supporting the channel.

[@schism420420]

This is the second video I watched and did not even finish the first one. Thank you for taking the time to make this video it is spot on and saved me a ton of money. The only think I didn’t like about the video was the Merc . YAMAHA 2020 ! ! ! ....... LoL

[@MoneyBass]

Thanks for supporting the channel!

[@ba41954]

Nice video. Well explained and shown! Thanks!

[@MoneyBass]

ba41954 thanks. Be sure to read the comments for additional suggestions.

[@marcusgallagher1723]

Great video man! Appreciate the cut lengths being written on the screen. Getting ready to pull an old merc today.

[@MoneyBass]

Marcus Gallagher thanks for watching. Glad I could help.

[@22josta]

Great Video!! Thanks for all the info!! Takes ALL the measuring and guess work out of it!! Even better than an ikea furniture directions haha!!

[@MoneyBass]

Thanks. There is some good info in the comments section also. I had ko idea so many people needed this info. Thanks for watching.

[@joewhitney4097]

Great video, thanks for sharing.

[@MoneyBass]

Thanks.

[@n5yiz]

excellent...thanks for this!

[@MoneyBass]

Thanks for watching. Be sure to read the comments and watch a few other videos for additional suggestions.

[@danielgrace7408]

Great thanks for sharing 👍👍👍

[@MoneyBass]

Thanks for watching. Be sure to watch the livestreams Tuesdays at 8pm EST. 😎

[@danieljohnson327]

very well explained i am going to build one. thank you.

[@MoneyBass]

Thanks for watching. Be sure to read the comments and watch a few other videos for additional suggestions.

[@k.b.24]

Very good work mate

[@MoneyBass]

Thanks!

[@travisnunya4641]

Best video love the list

[@MoneyBass]

Thanks!

[@leenader5249]

I'll paint your garage for an even trade on that motor😉

[@donaldmatthies6026]

Honestly, I just download the exact same blue prints off the internet! Great video, thank you!

[@MoneyBass]

Cool. Can you put the link in the comments section? It may come in handy for someone. Thanks for watching.

[@donaldmatthies6026]

@@MoneyBass sure! forums.iboats.com/forum/engine-repair-and-maintenance/non-repair-outboard-discussions/273327-building-an-o-b-motor-stand-instructional

[@donaldmatthies6026]

Use this link and scroll all the way to the bottom! 11x17 format printable

[@georgenettlesjr1466]

Perferct

[@MoneyBass]

Thanks.

[@MattMcleod4]

Great video! What size shaft is that?

[@MoneyBass]

Thanks for watching. I built it specifically for the motor I had at that time. I believe it was a 20" shaft.

[@BradM766]

I would really like to see how you attached the motor to this stand without drilling through the stand itself. What did you use to secure the motor to the stand wood?

[@MoneyBass]

The weight of the motor secures it in place.

[@gschnog]

Great video. Question.... How did you lift the engine?

[@MoneyBass]

Thanks. I used a tool specifically made to lift motors. I'm not sure of the name of it.

[@kennethsylvester4884]

I have a question about the angle cuts on this boat motor stand, I got everything cut accept the 42” boards and what the angles are

[@MoneyBass]

Thanks for watching the video. I don't know the angle. I held the board next to the location they were going, traced it with a pencil then made the cut. I hope that helps.

[@eltigredetejas2328]

I need to make one next week ....what was your total cost for this project?

[@troyraxsdale3618]

Cost me $135 with tax for all the materials at The Home Depot. You can get the casters much cheaper at Harbor Freight if you use your 20% coupon when they are on sale.

[@eltigredetejas2328]

Troy Raxsdale ok bet preciate that

[@MoneyBass]

Thanks for supporting the channel!

[@donaldhenderson5041]

I'm curious why no one just uses Robertson head screws? They are far superior to Phillips, and cheap as dirt.

[@MoneyBass]

Thanks for the information.

[@robertshaw3049]

What size outboard did you build it for i have an 87 200 evinrude im looking to put on it

[@MoneyBass]

I used it for a Evinrude 225hp Rude Ram.

[@dereksuperstrong1210]

I went ahead and subscribed because I feel sorry for you because you own a fetch motor. Aka fitch pop

[@MoneyBass]

Lol, thanks! Watch the livestream. Starts in 10 minutes. Every Tuesday 8pm EST.

[@egorbiletskiy2950]

If you want to make your own woodworking yourself just look for woodprix website. There is all you need to make it :)

[@MoneyBass]

Thanks for supporting the channel!