Easy Object Following Robot using Arduino and PixyCam

[@yuvrajkukreja9727]

You comes in the category of some such youtubers which extremely good teachers🙏🙏thank you👍👍

[@murtazasworkshop]

Thank You

[@saadkhan-ur3nh]

​@@murtazasworkshopPlease make a video of object tracking robot using esp 32cam in a similar way u made by pixycam.

[@toneelspeler2555]

Man this is amazing.....Trust me....this will be a great robotics channel in future

[@murtazasworkshop]

Thank you for your kind words

[@vitorsiqueira7306]

Thanks for the great quality content!!

[@gplgomes]

So the hard work is done by the Picxycam which locates an object and addresses it position.

[@qzorn4440]

Gee, i could watch these video for a long time, so interesting. Thanks. :) the pixycam sounds like fun.

[@juliocesavaz]

Great job, sir. Do you think this could work using the same code with an ESP32-cam instead of Uno and pixycam?

[@jamessawyer8565]

Great project and result! I'll try to adapt this to my own.

[@murtazasworkshop]

Thank you . Good Luck

[@uvtheprince5938]

Wow amazing project....... Can this follow only objects or even human?

[@michaelandrianto1927]

Great project, cant wait to see more fantastic idea

[@sayedsahbeni2598]

dude your content is great,you really have a futur doing this,keep up the good work and spend some money on Facebook adds,I found your channel on facebook

[@murtazasworkshop]

Thank you for your kind words. I will look into your suggestion.

[@syarruddin]

more accuracy than using infrared sensor i think. am i right?

[@satalaj]

Nice explanation 👍

[@sij2618]

this is the way I am looking for , Thank you very much sir .

[@manumohan1928]

can you make a video about OpenCV and Arduino object tracking with pan/tilt servos

[@g_____yu]

Hello I want to know where are you bought xt60 gender connected L298N driver

[@maleekshabazz6857]

Great video. Is it possible to use the pixycam to detect fire? Your response will be great appreciated.

[@heinzawhtut1227]

Very thanks for your sharing , explaining , guiding and teaching kindly bro ... Thank you so so much 🤗🤗🤗 🙏🙏🙏

[@letiendat90]

Can u help me if i use Camera OV7670 instead?

[@victoriabee6759]

Can you update the link for the code in your description? It says your site has moved.

[@5621346]

nice project sir!

[@calafeabra3727]

Great Project 👏👏👏👏 Is it possible to run a CNN written in python on any arduino board to control a robotic arm according input imaged from openCV camera?

[@Mohammedalhalabi16]

If you disconnect the internet from it, will it stop working or will it still work normally?

[@navidchoubaki]

Hey dude could I use of another type of cameras? Like night vision or other stuff like that?

[@raghavendragoud4896]

Which software did u used to simulate and model

[@hadisleiman8882]

Hello, how did you fit the battery splitter cables inside the 12v and ground terminals?

[@samirakhrif3098]

you qre the best of the best

[@sonia05085]

It's a perfect project! i want to make it! but how can i connect pixy cam with arduino? i can't find connection fig ;)

[@murtazasworkshop]

you can connect them directly to the icsp pins

[@chethanningappa]

@@murtazasworkshop thanks can you share the wiring diagram

[@mamathakumari9911]

Can you please make a video on how to use pixy camera particularly

[@kamilparczyk4623]

Hello mate. I have question. Do you think its possible to use that camera to make a route like with line followers? I mean camera will pick signs one after another instead of following one point

[@muhammadabizard7774]

This project can use for drone?

[@murtazasworkshop]

for drone try this kzbin.info/www/bejne/rHWynIh-g8mggdU

[@RoyAndrews82]

Honestly I'd give each wheel a mosfet, so they can be controlled individually/variable. 0-5v, 0-255. 🐒

[@fpvcowboy2635]

Can you add pictures of people for it to follow thanks?

[@majidpahore9052]

Wow that amazing

[@abhiraam2332]

What did he use to connect the pixy cam and the Arduino?

[@annienelson6099]

Would this be possible if you wanted to hook up something to yourself that beeped every time it came into contact with a specific set of receivers?? So for example if the car was just driving in a straight line past a series of objects, it would beep when it passed certain ones (such as ones that had a receiver or something) and not others

[@ozgurgirgin5171]

Hello :) I made the robot in your video "Easy Object Following Robot using Arduino and PixyCam" but the robot needs to go forward. else { moveRobot(70, 70); } Only the right motor rotates. Left motor does not move. I sent -70 to the Left engine to test it, it worked. But it doesn't go straight with 70. The rest of the code works fine. Do you have a solution suggestion?

[@Hiashygamer]

Is it possible do this with openCV? 🤔🤔

[@pranavmaddipati5771]

hello sir. I am using the pixy2 sensor and the code doesnt seem to be working. Do you by any chance have the code for the pixy2 sensor

[@abfig78]

I got it. Code below....

[@abfig78]

Comment out #include

[@jerryhuwolf8367]

great video any chance you could update this showing this robot with the newer pixy2 i would so appreciate it

[@CranFIN]

can I share your video on other social networks and on my channel?

[@murtazasworkshop]

Yes ofcourse

[@CranFIN]

@@murtazasworkshop thanks

[@mingthemercy4605]

Good job, what is the minimum and maximum sensing distance? Thanks.

[@mohammedkamran8559]

Is it possible to implement the same with raspberry Pi pico and micro servo?

[@Sugar755]

I have question sir, can pixy cam detected 2 object with different color ?

[@attaullahafridi1176]

Can u make me a drone based project which should have 3 features? . 1. Object detections and count 2. Object tracking 3. Automatic obstacle changing if something comes in way while tracking object. . The drone should be connected with mobile. If drone has followed/ tracked a person so whenever owner wants, the drone would return to the place where that owner cellphone is. . Thank You

[@pokednaful]

Can we run the robot without connect it to computer after upload the code?

[@loaffette3860]

does this work with the pixycam 2? How could I make it work with the pixycam 2?

[@marsdefacto]

Need help for pixy 2 code, can you help me?

[@aatutsak]

Hi from Turkey. Can I do this project on ESP32cam module? Can you help me plz?

[@sukhmansinghbhogal]

How to broadcast the camera to the smartphone wirelessly?

[@Mohammed-rq2ly]

Can i make this project using camera ov7670 with arduino???

[@murtazasworkshop]

yes but it would be slower and more difficult to work with

[@jeffro5713]

Its not object following it is color tracking, the PixyCam is only able to detect and follow colors not an object. Provide it with a yellow rubber duck or a yellow ball the results will be the same.

[@СашаИванов-ъ3й]

Assalomualaikum brother, how are you. Can I ask one question, Arduino+esp32 s cam. On this project? If possible, make a video. How to program.?

[@pamelabarba5479]

Hi, can you help me trying to write the code for pixy 2 but I’m getting errors

[@leonorconego8940]

Hello! Would you give me permission to use some shots of this video in a video in which I'm working on? (it's a teaser - 1minute maximum - which intends to promote an activity my faculty (Faculty of Engeneering of University of Porto) is going to do with high school students next month. So basically I need to find footage of robotic arms and a DIY arduino Line Follower Car to exemplify what we're going to do with them). I've looked for something similar on 'Storyblocks' but I can't find footage like this. Thank you in advance =)

[@murtazasworkshop]

Sure . No problem

[@jerryhuwolf8367]

i signed up at cv zone to get this project but of course it doesnt work with pixy2

[@youtubelk5623]

Sir, Can esp8266 be used instead of arduino?

[@minhminh5008]

This robot follow the colour, right? If two object have the same colour, this robot cannot follow the object choosed.

[@PIYSocial]

Can you please give the buying link of the camera module used here. Thanks.

[@murtazasworkshop]

There is a newer version of this camera pixy cam 2 . I recommend using that . Here is the link amzn.to/2FaVDx3

[@akrammirza8703]

@@murtazasworkshop hello, does the same code and connections work for pixy2 camera as well?

[@jeevanprasad2049]

can this project done in raspberry pi and pi cam

[@murtazasworkshop]

Yes but you will need to write a bit more code.

[@siddharthpatil7892]

i'm using pixy2 instead of pixy , can you help me with code ?

[@murtazasworkshop]

The code should be the same

[@vinayanpa126]

how to use phone cam instead of pixycam

[@hobbyrcbd]

Hello there vaiya, the "link" is broken, can you fix this for me, please?

[@คันฟรอย58]

Where can I find the code?

[@kamalcharan5570]

Can this also trace human ??

[@penguinman4495]

I am working on this project with a Pixy 2 and running into some problems. Every time I run the program, I get an error that says _Pixy2 has no member named 'getBlocks'_ Please help if you can.

[@MohamedAli-cv4hu]

Hey, Have you rectified your problem?

[@farhanraza1995]

@@MohamedAli-cv4hu have u solved this i am also stuck

[@MohamedAli-cv4hu]

@@farhanraza1995 no I havent

[@MohamedAli-cv4hu]

@@farhanraza1995 Have you made any progress in code? if so can you share please!

[@dogukanirmak601]

Can you change to code for pixy2

[@uvtheprince5938]

Will it follow human?

[@yiannispahitas192]

Can you please help? I am using a pixy 2 and I am getting few errors in the code.

[@murtazasworkshop]

Sure

[@yiannispahitas192]

@@murtazasworkshop I am actually using a chassis with two motors and wheels and pixy 2. I have managed to fixed the errors and compile the code on pixy 2. But the robot doesn't seems to follow the object correct. I think it has something to do with the values in the moveRobot if statement. Any ideas?

[@christoforoschristoforou9870]

@@yiannispahitas192 Geia sou file mou prospathw kai egw na kanw to robot kai exw problima me ton kodika, den pernei dedomena apo tin pixy 2, mporeis na me voithiseis se parakalw?

[@MohamedAli-cv4hu]

Have you sorted the code?

[@SAMETELMACI]

aferim murtaza

[@musicforsoul7441]

Sir i need this project

[@guystandard6285]

this is great but Pixy cam it very expensive for me :(

[@despicable_me_118]

code please

[@SalmanKhan-pu6sc]

Where r u form?

[@murtazasworkshop]

Pakistan

[@SalmanKhan-pu6sc]

I'm from Bangladesh

[@mohibali7985]

Please can you give me coding.?

[@DeepakKumar-vh8fr]

Please give all Belonging name I am make it model

[@surajprakashsah9110]

dude could you help me in this project

[@murtazasworkshop]

Sure

[@turbogaming3016]

kindly share me the robo coding

[@murtazasworkshop]

the code is in the github page . Link in the description

[@DeepakKumar-vh8fr]

Code copy give me

[@burhanuddintinwala7788]

Bro r u Bohra muslim