Easy way to install Penn Battle bail spring: Fishing Reel Repair

[@TSGReelService]

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

[@joesfishingvideos]

You just saved me a trip to the reel repair guy. Thanks much.

[@TSGReelService]

You're welcome and happy to hear it, brother! That's at least $15 saved that you can use toward some other fishing goodies. Spread the word about the channel.

[@SmokyBuck]

Thank you! After a frustrating couple of hours trying to do this, I found your video. Piece of cake. So helpful! Great Video.

[@TSGReelService]

You're welcome! Glad to hear it helped! Thanks for watching and taking the time to comment. Spread the word about the channel.

[@cmvalson]

Thank you for posting this video. You made a bad situation an easy fix..

[@TSGReelService]

Excellent! You're welcome and glad to hear it helped. Spread the word about the channel.

[@ultramoon4]

Amazing I thought I destroyed my reel and you help to rescue it. Be blessed

[@TSGReelService]

Thanks for watching! Glad to hear we got your reel back in fighting shape!!!! More vida to come.... spread the word about the channel!

[@wakeelmohammed2473]

I don't know how to thank you for this. For the first time, I dismantled my spinning reel and was struggling to set the spring in the right position. Thank you a lot!

[@TSGReelService]

You're very welcome, thanks for watching! Glad to hear it helped! More vids to come.

[@jtr10411]

You just saved me 50 bucks. Thank you!!!

[@TSGReelService]

You're welcome! Spread the word about the channel.

[@j.thornton8390]

Thank you so much! I’ve been so frustrated trying to get the bail back together on my penn fierce 3 2000. Your video was perfect. Took me 10 secs. Subscribed!

[@TSGReelService]

You're welcome and thanks for watching and the sub! Happy to hear it helped. More vids to come. Spread the word about the channel.

[@ernstrenner6663]

I am thankful for the video! Couple of tips that tripped me up: make sure the brake disk on the opposite side of the bail is aligned in the notch correctly, or the bail arm won't lock for casting. I also found that putting the spring in place before putting the cap on was helpful. Thank you for putting this out there. All works fine!

[@TSGReelService]

You're welcome and thabks, Ernie. Glad you found it helpful. If that's an issue for you, you can secure any notched areas prior to assembly. Check out my other videos and spread the word.

[@robertmccausland2594]

A great video. Struggled with reassembly after buying parts to install. Not sure I could have done it exactly as it should have been without your video. These reals are a new breed that I'm just not familiar with. Thanks again, Bob

[@TSGReelService]

Thanks Bob! Glad to hear it helped you successfully tackle (pun intended) the problem. Subscribe, if you haven't already done so, and spread the word. More vids to come!

[@hkober]

Thanks very much for the video. It helped me get my Pflueger Trion back together correctly. While a much smaller reel, the operation of the Pflueger is identical.

[@TSGReelService]

You're welcome and thanks for watching! Glad to hear it helped. Funny enough, I just got a small Trion in for service.... may do a video on it. Spread the word about the channel.

[@antoniorillo4842]

Thank you sir. That video you just sent about the bail arm installation is just great... very helpful the next time I break it down for future service. Thank you again.

[@TSGReelService]

You're welcome.

[@DanielvdPoel]

Thank you, I had put the spring part on te opposite side from the shiny metal s thing so the spring didn't do anything, searched on yt and found your video, it was a fierce II btw but it worked the same. 😀

[@TSGReelService]

Thanks for your comment. These setups usually carry over to other reels, so I'm happy to hear it helped. More updates to come, so be sure to subscribe, if you have already done so, and spread the word about the channel. Thanks!

[@jeffreyrandall5423]

THANK YOU so very much. Very helpful. Fixed my reel in minutes:)

[@TSGReelService]

You're welcome and thanks, Jeffrey! Glad it helped. Don't forget to subscribe, if you haven't already done so, and be sure to spread the word. More vids to come!

[@themomentum8412]

Finally i found what I needed. Thanks. Btw subbed

[@TSGReelService]

You're welcome and thanks for watching and subbing!!! Glad to hear it helped! Spread the word about the channel.

[@raulfernandez3137]

Exactly what I was looking for, very thankful for the video!

[@TSGReelService]

You're welcome and thanks for watching! Glad it helped. Spread the word about the channel.

[@SOFishing]

Great video I was able to repair my bail of my Penn Battle 3000 in just a few mins!! 👊

[@TSGReelService]

Happy to hear it. Thanks for checking out the vids. Spread the word about the channel.

[@Mahigeer1]

Thank you for the video. Very helpful.

[@TSGReelService]

You're welcome and thanks for watching!

[@williamgreene3192]

Excellent video!! Wish I had looked at it BEFORE I tackled the job! I just went over my brand new Battle II 5000 --- a little right-out-of- the box checkup -- greasing and oiling before using it. I managed to dope out the reassembly of the bail spring parts myself with some time-outs to restore patience. Thankfully, I took my time and avoided forcing or damaging anything, however, it was a process that took me over an hour -- just to study the pieces of the bail assembly and get it right. That said, I was pleased to find the factory had done a very decent job lubricating the reel generally.

[@TSGReelService]

Thanks! The Battle's are nice reels and I'm glad to hear you were able to figure it out. We've all been there. Your story made me chuckle. It reminded me of a similar experience I had recently. Somehow, I was all left thumbs and took forever on a reel I'm well acquainted with. Either my brain, the reel or both weren't cooperating that day. I was going to trash the video, but maybe I'll just post it. Please subscribe, if you haven't already done so, and spread the word. More vids to come.

[@williamgreene3192]

@@TSGReelService You are very welcome! I did subscribe --- I got some other lessons in patience when building rods (surf, catfish & carp) - always leave plenty of time, and have the right tools at hand. I never made anything fancy, just put together very adequate rods that held up.

[@TSGReelService]

That's all one needs... a rod that does the job. Thanks for subscribing! Next vid drops tomorrow.

[@BeckVMH]

Thanks so much! Very clear. I did have to first set the spring in place with the plate off, but still went well. I was probably not leaving suitable play between the plate and spring while attempting your instructions.

[@TSGReelService]

You're welcome and thanks for watching! There's a few ways to do, so it's all good. I personally lay the trip arm and then spring in.... then cover and lock the cover down before putting the bail arm on. The method in this video gives you a little more room for error, that's all. Spread the word about the channel.

[@foryourconsideration1715]

Thanks!

[@TSGReelService]

Thanks for the love! It is appreciated! Spread the word about the channel. More vids to come.

[@lucannewland1187]

You're a superstar, thx! 😊

[@TSGReelService]

You're welcome and thanks for the love! Spread the word about the channel.

[@mnagaraj1983]

Thanks for this useful videos, i have fixed myself the penn saragus 6000 reel

[@TSGReelService]

Thanks for watching! Glad to hear it helped. More vids to come.

[@evans1982]

Can you please help? I have a penn fierce 3 which looks similar to your reel. I do everything you do, and it looks exactly the same, but when I try to put the bail back on, it doesn’t line up right. The bail angle isn’t right, it’s too high, and I can’t activate the spring. I’ve tried playing around and adjusting, but the only way it seems to fit snug is the way I described above. For context too, every part on the reel is factory, only replacement part is the bail spring. Any thoughts?

[@TSGReelService]

Thanks for watching! Assuming you've purchased the correct replacement bail spring and are following along with the video, that's the way to do it. You can also follow along with this Penn Fierce III video kzbin.info/www/bejne/iYC4eGWpiruliNE to see how the process looks on your reel.

[@evans1982]

@@TSGReelService Thanks for the advice, yeah I have the right spring and figured it out thanks to your other video! Thank you for what you do, definitely just subscribed!

[@evans1982]

@@TSGReelServicejust sent you $3, thanks again!

[@TSGReelService]

Excellent! Happy to hear it worked! Tight lines!

[@TSGReelService]

Got it! Thanks! Spread the word about the channel.

[@joedoug3647]

Thanks for making this. It also worked on my Penn Fierce 2

[@TSGReelService]

Thanks for watching! Glad to hear it helped.

[@mnmmj2104]

Awesome Bro

[@TSGReelService]

Thanks for watching! Spread the word about the channel.

[@josephlatu8218]

Thanks bro good video

[@TSGReelService]

You're very welcome! Thanks for watching and taking the time to leave a comment! Don't forget to hit the thumbs up and spread the word about the channel.

[@Xam431]

Thanks bro 😎

[@TSGReelService]

All good. Thanks for watching! Spread the word about the channel.

[@man2008kenny]

Thanks!

[@TSGReelService]

You're welcome and thanks for watching! More vids to come.

[@jubyjiju5624]

Thanks bro❤️❤️❤️❤️

[@TSGReelService]

You're welcome and thanks for watching! Spread the word about the channel.

[@petekane528]

i cannot thank you enough

[@TSGReelService]

Glad to hear it helped. Spread the word about the channel. More vids to come!

[@amsully3352]

Watch ur vid n fix my battle 3000 luv that reel it’s old put gears in 2 👍

[@TSGReelService]

Nice! Thanks for watching. Glad to h hear you found it useful. More vids to come.

[@SPaw-dg3ye]

I got the spring into place and when I put the try to close the bail after tightening the screw, the plastic piece in the spring keeps popping out of place. Any tips?

[@TSGReelService]

Thanks for watching! Yes, if you're have trouble with that, just screw the bail spring cover done rha while way, right away.

[@MrPartyPantsMonroe]

Thank you!

[@TSGReelService]

You're welcome and thanks for watching! Check out my other vids and tell your friends about the channel.

[@alapetiseui2243]

Hey so, if it’s the same concept as an alpha Shakespeare…but not working, is it because the spring is old or ? Please help

[@TSGReelService]

Thanks for checking out the video. What's not working..... the technique or the bail flip? Please post a video of what you're referring to and post the link to the video here.

[@sofyanhadi8779]

apa namanya yang masuk kedalam pir