Mastering Eaton: Easy Pedal Clutch Installation and Adjustment Tips

[@davidbrown5587]

I would never work on any mechanical project with a ring on my finger.

[@issacjosekuttivila]

why strap drive system getting damage

[@vicpetrishak1077]

Why manufacture a rigid type clutch plate

[@mbokokapembwa9098]

How much is the cluch

[@antoniogiomo9123]

Eu conheço um menininho...que esperava no portão da empresa... aguardando o Honda passar...e o café com leite (porque esse menininho era esperto...esperava queimar os fuzis dos transformadores em torno da empresa em Valinhos....ele era preciso!) Trocar os fuzis dos transformadores em "torno" (jogo fe palavras) da empresa e apostar no Palmeiras e Santos....

[@jesustrevizo3148]

Freightliner m2 with mechanical clutch linkage rod having excessive freeplay on pedal after new clutch install..... .

[@BossDad5641]

jesus trevizo hi what was your issue ?

[@BossDad5641]

jesus trevizo were the disks installed backwards?

[@jesustrevizo3148]

@@BossDad5641 No. I removed it to double check. It was a reman clutch, thought maybe was a defect. Installed a brand new one, same issue. The pedal assembly was previously replaced. I thought maybe there's some adjustments on the crossbar mounting at firewall.

[@Casey-ey7cp]

Good jb

[@jesustrevizo3148]

On a 10 speed what causes the transmission to pop out of 4th and 9th gears?

[@dhaniapinadtaya8595]

Only clutch disk hold the flywheel?

[@dieseltechnician6227]

detent balls

[@sordidsanctitythrash]

syncros worn

[@vicpetrishak1077]

Sliding clutches worn inside transmission

[@hamakumbamalvin7401]

after install new clutch , two gears enter into gear at the sam tym. what can be the problem?

[@jotegg1276]

shifter tower is not installed correctly the stick is in wrong hole in forks

[@morgandelaware7269]

The shifter needs realigning

[@gatotliuliuriyanto2431]

Yes like for mekenis

[@ivandavalillo8209]

Muy bien

[@polopadilla8679]

Mekedo vien ya loistale gracias

[@mist3rasylum397]

Easy clutches are garbage, the pedal is absolutely way to loose.

[@stevenkerry3101]

ceramic will fuck up your flywheel more cost

[@robertschemonia5617]

@@BigBirdErnTHC run a ceramic clutch. It's not like the flywheel is going to wear out before the clutch will. And, if you can find a machine shop to do it, you can always have the flywheel turned and ground to resurface it. Organic clutches do not stand up to heat or any kind of abuse in a heavy duty truck at all. They will overheat and crack, or glaze up really bad and sometimes cause horrible clutch shudder upon release when loaded.

[@danielelliott3659]

Organic clutches are a thing of the past for heavy duty applications