I like how you break down and explain the equipment you use to make your videos and how you use them.
@TheTechPreacher Жыл бұрын
For sure I'm working on a video
@heroicvision Жыл бұрын
Brother this is a gold. No one ever breaks it down like this how to properly use the wireless system with the Tascam X8.
@TheTechPreacher Жыл бұрын
For sure no problem bro
@BarryJohnson Жыл бұрын
The audio sounds great. Wireless 32 bit float is so clean.
@TheTechPreacher Жыл бұрын
Yes sir
@Bruces-Garage3 ай бұрын
This is the info I’ve been looking for. Thank you!
@TheTechPreacher3 ай бұрын
Glad it was helpful!. Thanks for watching
@PizzlesTechTime11 ай бұрын
I ended up grabbing the Porter capture X8. They only had an open box one at my guitar center and they tried to sell me it as new. I went back and got a discount.
@J-Dawg-18 ай бұрын
Thank you for being so helpful brother!!!
@TheTechPreacher8 ай бұрын
Ayyyyyy thanks for watching I really appreciate it
@millielaw1195 Жыл бұрын
Wow love this... Optimal
@TheTechPreacher Жыл бұрын
Glad you like it!
@jeffhale1189 Жыл бұрын
Thanks for sharing. I greatly appreciate your effort to make great videos. Blessings on your day!
@TheTechPreacher Жыл бұрын
Thanks for watching I really appreciate it
@PizzlesTechTime11 ай бұрын
I have only recorded on clip with my DJI wireless mic and 32-bit float point. I was amazed at how clean the audio comes out. I'm wondering though since the road itself has 32-bit float point how much different the audio would actually be?
@TheTechPreacher11 ай бұрын
No difference in audio 32bit just prevents clipping
@PizzlesTechTime11 ай бұрын
@@TheTechPreacher I just watched a review that said you only get 32 bit flow point on the backup recordings on the rode. If you're using the transmitter you don't get it?
@rodrigohr69214 ай бұрын
Great! But I have a doubt, can you use the small external input beside to xlr input too, right? So what´s the diference, bro?
@TheTechPreacher4 ай бұрын
I don't understand the question
@UnboxRacing3 ай бұрын
You mean the camera line input? I think you can but for mics best to unplug the 1 and 2 mics at the top as per the video.
@ephin472 ай бұрын
I don’t think this is right. The 3.5 output from the Rode receiver is sending a variable line signal into the portacapture X8. Yes, if that signal clips, and youhave the Portacapture Set to 32 bit float, you can bring it down in post. However, the gain setting on the Rode wireless mics is what determines whether or not the microphone input clips. If you have that setting too high, you will still get a clipped signal going into the Porta capture (even if the Portacapture gain setting is fine). The new Rode wireless Pro has its own 32 bit float. That’s where the 32 bit float needs to be to allow accidental wireless microphone clipping to be corrected. That’s my understanding, anyway.
@TheTechPreacher2 ай бұрын
Yes you can clip at mic level. Thanks for watching I really appreciate your insight
@UnboxRacing3 ай бұрын
Thanks for sharing. I am wondering about the quality of the supplied mics on channels 1 and 2. They are very light and flimsy and when travelling they need to be detached. How do they compare quality wise with a lavalier mic? Did you notice a difference?
@TheTechPreacher3 ай бұрын
Lav mic would be better
@brucehilsmeyer24352 ай бұрын
If you split the 3.5mm cable and ran one into input one, and the other into input 2, could it record timecode from the Rode Wireless Pro?
@TheTechPreacher2 ай бұрын
Nah not that I know of
@SavageScientist Жыл бұрын
why not 32bit int what's so good about 32, bit float.
@TheTechPreacher Жыл бұрын
None clipped audio
@SavageScientist Жыл бұрын
i know but what is float ?
@TheTechPreacher Жыл бұрын
It's a floating audio signal with huge dynamic range
@SavageScientist Жыл бұрын
@@TheTechPreacher oh ok thanks
@dln5 Жыл бұрын
E the my LG v60 got a security update the other day.
@TheTechPreacher Жыл бұрын
Nice
@Buwuhbuwuh9 ай бұрын
What cable do you use if you have 2 rode mics and 1 receiver, and want to use 2 mono channels?
@TheTechPreacher9 ай бұрын
Same cable. You have to set the receiver for stereo and in post use each channel as mono
@jwate8 ай бұрын
You need to use the Aux input, or use a female to dual male 1/8 splitter into input 1 and 2. You have to record in stereo to get the two separate tracks. Later sum to mono in post.