wish it was a faster track your car hardly reached its potencial But im so glad the build is done im really craving doing it for my 2012
@gingerauto3 жыл бұрын
Looks like a blast man!
@EazyOnCars3 жыл бұрын
It was, hope to do it again soon!
@willecutlip3 жыл бұрын
Nice to see your EG33 exhibits the classic “warmed up, where’d my oil pressure go?” Suggest you go a little heavier on the oil (10W50) if you take it to the track again.
@EazyOnCars3 жыл бұрын
Glad we think alike :) This was 15w-50, I'm thinking putting the oil cooler back on should help a bit.
@willecutlip3 жыл бұрын
@@EazyOnCars short of going to a dry sump, I’d recommend that you see if you can’t pick up an Accusump on eBay. Relatively cheap insurance against toasted bearings.
@EazyOnCars3 жыл бұрын
@@willecutlip Thanks Bill, I will look into that.
@bvward3 жыл бұрын
Car was hardly breaking a sweat;)
@willecutlip3 жыл бұрын
Were the fans coming on? Coolant temps above 200 and you didn’t seem to be pushing the car hard at all(?)
@EazyOnCars3 жыл бұрын
Yeah, they are on over 200F. I wouldn't be worried until it gets to 225-230F. The dash temp gauge didn't move. That being said I think I can do better than the griffin drag radiator and will probably upgrade this winter.
@willecutlip3 жыл бұрын
Sprk = degrees of advance?
@EazyOnCars3 жыл бұрын
yep, though I suspect this is only the base value. For example I know 15 degrees is max under boost, but the flex fuel sensor adds up to 2 degrees, and I don't think thats reflected in the number shown.
@patrickfitzwater55113 жыл бұрын
Is it as easy to get into the track as it is auto cross?
@EazyOnCars3 жыл бұрын
Yep, just have a helmet and pay the entry fee. Car might have to pass tech inspection.
@willecutlip3 жыл бұрын
Neg boost = pulling vacuum?
@EazyOnCars3 жыл бұрын
Correct 👍
@ericr71623 жыл бұрын
Will there be another rx8 ls swap video?
@EazyOnCars3 жыл бұрын
Oh yeah, it's going to be next up on the priority list.
@ericr71623 жыл бұрын
@@EazyOnCars what will you be doing?
@EazyOnCars3 жыл бұрын
I've got the driveshaft stuff filmed, wiring harness started, relocation of the abs unit, then probably the cooling system. I need to sure up the steering rack and get the shifter linkage working.
@ericr71623 жыл бұрын
@@EazyOnCars alright. Thank you, any idea of when the video will be up?