Ebike Low Level Brake, Hi Level Brake : Electric viacle Controllers - Brake Lgiht and Tail Lgiht

⚡EBIKE BOOKS AMAZON ⚡
1. eBIKE Building Book, Hub motors Guide Book
2. BAFANG & Center Motors Book Guide Book
3. Wheel Building & E-BIKE Guide Book
4. Lithium Battery Building Guide Book
www.amazon.com/gp/product/B0C...
Products that are easier to use
Ebike turn signal tail light with brake, with switch DK336 for e-bike and scooter lamps, 48V, 36V
s.click.aliexpress.com/e/_DC3...

[@rptamilmusic4398]

The simulation software name

[@Mobilant_US]

I made it myself.

[@snirshmuel870]

when using the low brake, if the outpot voltage of the headlight is 48v and the voltage of the low brake port is 5v, is the wiring still valid?

[@Mobilant_US]

To put it simply, most high level brakes use 12v. This is for use with stop lights. It is recommended that headlights use an independent power source.

[@robertroigsantamaria]

but does the motor coast to a stop (cuts power to motor) or is it actually braking the motor to bring it to a more aggressive stop?

[@Mobilant_US]

A device that prevents the motor from rotating even when the throttle is used. Think of it like a motorcycle clutch. When using a direct motor, powerful regenerative braking is possible with a set-up.

[@iykmoses]

Can this serve as a regenerative braking?

[@robertroigsantamaria]

@@iykmoses the bike I have ... has a motor with a pinion inside or something, so it works as pedals, if you stop pedaling, the bike does not stop.

[@robertroigsantamaria]

I am guessing... as I wired it wrong and the motor would spin, but not the wheel.

[@THESOHAILKHAN1992]

It means it should be connected to brake switch in order to make it impossible to brake and acceleration at the same time.