Ecovacs | Omni X1 Charging Statxion | How to Open back & side cover ?

  Рет қаралды 4,615

Ecovacs Technical Support

Ecovacs Technical Support

Күн бұрын

Ecovacs | Omni X1 Charging Statxion | How to Open back & side cover ?
1st detailed video on this topic with safety instructions.once we Able to open back cover then what's the issue with station easy to know & fix.I hope you like this video.

Пікірлер: 64
@UAVier
@UAVier 9 күн бұрын
Bro youre the GOAT, youre awaesome dude.
@Sowhatuk-j8g
@Sowhatuk-j8g 15 күн бұрын
The videos are so helpful, and I also contacted them. They replied promptly. I figured out the issue was the faulty pump for the clean water. I replaced it, and all went well. Thank you so much!!!
@sobhanahtasham9539
@sobhanahtasham9539 14 күн бұрын
Do you have any videos or advice on how to replace the water pump? My X1 house makes noise when cleaning the base but no water comes down. I think the problem is either a blocked pipe or the pump.
@colindonaghy8617
@colindonaghy8617 7 ай бұрын
Thankyou very much, I just managed to get my T20 base apart and remove the sink full sensor wiring to eliminate the continuous errors.
@quadlawnmowerman
@quadlawnmowerman Ай бұрын
any chance you can show the same opening for the Omni X2, my charging has failed (no voltage on the pins) and hopefully it is just the power pack
@neolabo6281
@neolabo6281 7 ай бұрын
Thx so much from Paris for tour help!!!! You're a Boss!!👍🙏♥️
@HariHaranMadhavan0
@HariHaranMadhavan0 10 ай бұрын
Very beautifully explained, thank you, I don't have an X1, but I will think twice even if they put it on a sale 🙂
@googlemini7213
@googlemini7213 2 ай бұрын
So informative, thanks for making the time to do this. Any advice to why no water gets to the mop but the sink can drain and fill the dirty water container would be appreciated.
@jaskaransingh2507
@jaskaransingh2507 23 күн бұрын
i am facing same issue
@Rob-pb6nn
@Rob-pb6nn 7 ай бұрын
Hey, really nice video, thank you! I would like to ask, I have the same issue as the one in the video, what can I do to fix it?
@ArielBarabas
@ArielBarabas 6 ай бұрын
does the US base CH2103 allow for 220v? if not, is there a replacement to make it compatible? Thanks! great video!
@antoniomanzoni8703
@antoniomanzoni8703 17 күн бұрын
hi the deebot omni x1 base no longer loads clean water you hear a buzz I blew into the pipes and they are free could it be due to an update or the pump?
@stephenspud4193
@stephenspud4193 9 күн бұрын
Hello, do you have a video or plan to make a video that demonstrates how to take the X2 station apart? I tried to follow your X1 guide but the X2 is completely different in design and I wasn’t able to open the sides/back etc. I would really appreciate a reply. Thank you
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 5 күн бұрын
Not yet uploaded... Will try soon
@UAVier
@UAVier 9 күн бұрын
Dude i took it apart, found out is the pump not working. i beat it up with a hammer and now it works. ima find a replacement part. How can I send you a tip?
@Devangsurti1092
@Devangsurti1092 Ай бұрын
Where are you guys based I need to repair the vaccum
@jihadnarikkodsubair1271
@jihadnarikkodsubair1271 Ай бұрын
Could you pls show how we can remove the Bottom part for easy courier . Package
@xanaduf
@xanaduf 3 ай бұрын
very nice video...and define ecovacs have poor design for case or wana user open case....
@joeowens3495
@joeowens3495 6 ай бұрын
Hi, can you please make a video repairing the clean water pump in the x1 Omni. Clean water will not dispense but there is a humming sound coming from the pump. Thank you sir.
@musphis
@musphis 5 ай бұрын
Same here! Now that I know how to remove the plates, just need to fix the pump. I tried a method of flushing water down the pipe to prime the pump, but that didn’t seem to fix it. This is actually the second time I’ve had problems with the pump and now it m out of warranty. 😅
@julienfloer7708
@julienfloer7708 24 күн бұрын
Yes please happen a lot as an issue
@sobhanahtasham9539
@sobhanahtasham9539 13 күн бұрын
@@musphishey, did you have any luck fixing you problem? I’m having the same issue and would appreciate some guidance. Thanks.
@Hussamabushaikh
@Hussamabushaikh 28 күн бұрын
how I can order base motherboard as replace to my fault one?
@taghi57
@taghi57 6 ай бұрын
Do you have a video about disassembling station ch1918 for deebot N8+
@demphil6063
@demphil6063 6 ай бұрын
bought new mother board. water still not coming down to clean pads. solwnoid or water pump? do you have part numbers please?
@dwaynebaker9817
@dwaynebaker9817 7 ай бұрын
Great videos. I have a deebot t20 omni and its not charging. The station has no power
@michaeldevos389
@michaeldevos389 4 ай бұрын
Hello @ecovacstechnicalsupport5278. Issue: doesn't suck water out of cleaning tray. No noise. No action, nothing. Took it apart and still no noise. Would the diaphragm pump be what creates the suction?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 4 ай бұрын
Can plz WhatsApp a video Clip Sibi can hear the sound of the station...00601137973018
@michaeldevos389
@michaeldevos389 4 ай бұрын
@@ecovacstechnicalsupport5278 I've already got it taken apart. If I hit the water button (all the way to the left) the water starts filling the tray as it should. Then if I hit the button again, some time passes and it says complete. No noise at all once I stop it from filling up until it says completed. If I hit the button again, water goes in again until the sensors say it is full. I never hear it attempting to suck any water out like I used to, but fills as it should. The hose was dirty, but not clogged.
@despicable_me
@despicable_me 10 ай бұрын
According to your experience & expertise, what would be the model that had the least complaints?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 10 ай бұрын
Ecovacs Ozmo T8 model or Ozmo 920 I received only few in years
@mv79590
@mv79590 10 ай бұрын
@@ecovacstechnicalsupport5278 Hello from Colombia in South America. I follow you and let me tell you that your channel is very good. I have a deebot ozmo 930 and the robot has strange behavior. It works well, the sensors work perfect, the vacuum is high and it makes the entire map good. But if I place the mopping system then it only works in very small spaces and says that the cleaning process is finished. Dispense water well, not excessively. but it doesn't cover the entire map. Could you guide me how to solve this problem?
@stevenlow4436
@stevenlow4436 10 ай бұрын
Hi, after I reinstalled the main brush motor of my T9, it started to go backwards in circle. May I know what it wrong with my robot?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 10 ай бұрын
Top cover not installed properly or maybe Main brush motor Cover not properly installed..or front bumper stuck from one side that's why reverse in circles
@stevenlow4436
@stevenlow4436 10 ай бұрын
Ok thanks 😊
@Plyst3
@Plyst3 9 ай бұрын
The drain from the bottom of the station is clogged, but cleaning it normally isnt fixing it. How would i get access to the drain hose to the dirty water tank?
@pierturelli7562
@pierturelli7562 8 ай бұрын
wich is the solenoid valve model?
@vibhorjain
@vibhorjain 8 ай бұрын
Thank you Sir. I was able to open the station. My water is not coming down at the cleaning station or mopping. Can you please help with that?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 8 ай бұрын
3 reason, first suction is leaking from tank seal..open clean water tank n remove rubber seal wash n fix it by nicely... don't Press too hard, if still same then might be solinoid pump issue or 3rd n last is motherboard issue
@AnnalezaGoddard
@AnnalezaGoddard 7 ай бұрын
@@ecovacstechnicalsupport5278 can you show us how to fix that issue?
@vivianskitchenanddesserts2059
@vivianskitchenanddesserts2059 4 ай бұрын
I have omni x1 only the clean water is not coming out from the water tank to the depot ,I can hear the motor working, I checked the tubes I dont see any visible error ,can you please help me.thanks
@walterwoodard4544
@walterwoodard4544 9 ай бұрын
So I have the same one and insects have ruined the motherboard, where can I purchase a new one??
@kellysuet
@kellysuet 9 ай бұрын
Hi brother, how can I contact you to fix my onmi x1 ? I'm in Kl and need to fix it desperately.😅
@ВеселоеВремя-х1ы
@ВеселоеВремя-х1ы 10 ай бұрын
the error does not concern the floor. How to fix ?? Deboog N8
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 10 ай бұрын
Plz write full error so I can explain accordingly TQ
@ВеселоеВремя-х1ы
@ВеселоеВремя-х1ы 10 ай бұрын
@@ecovacstechnicalsupport5278 The vacuum cleaner does not move. The button flashes red. The voice says "does not touch the floor." The application "does not touch the floor. Place it on the floor." Most likely one microswitch on the wheel is broken. The vacuum cleaner is half a year old. Sorry Google Translate.
@ВеселоеВремя-х1ы
@ВеселоеВремя-х1ы 10 ай бұрын
Help
@viorishi
@viorishi 6 ай бұрын
Hi Master, I have the "Communication malfunction between DEEBOT and the Station. Please check." for a while, charging is okay but no other functionality is available from the station. I reset the deebot x1 Omni setup / wifi but the issue persist, any advise is greatly appreciated 🙏
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 6 ай бұрын
Actually normally it happened because of app updates issues... in this case need to contact with service centre...they will manually install program in motherboard through USB...if stills same then motherboard need to replace
@datshotm8435
@datshotm8435 10 ай бұрын
Hi, I just bought the T20. My problem is that it finds the station and charges but the app still says that the bot is not connected to the station. Do you know the solution? (I did what the troubleshoot told me to do, nothing happend, error is still there)
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 10 ай бұрын
Deebot motherboard need to replace..plz request seller or service centre people to fix motherboard
@fferdianlim
@fferdianlim 8 ай бұрын
Hi my x1 station stop pumping clean water, can it be fixed?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 8 ай бұрын
Plz read my answer is same conversation I just upload
@taghi57
@taghi57 6 ай бұрын
How do you open station CH1918
@user-gp8qd5gm1v
@user-gp8qd5gm1v 8 ай бұрын
Hi, I have an x1 but lately it keeps saying the wheel is stuck even though there's nothing wrong with the wheel
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 8 ай бұрын
Wheel need to replace... motor jammed
@SparkSo
@SparkSo 28 күн бұрын
What about the bottom?
@kaelanwong8799
@kaelanwong8799 8 ай бұрын
I am having an issue where there seems to be something clogging the dirty water pipe, I’m not sure how I can access it in order to clean out any debris inside could you please make a video or respond with a solution?
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 8 ай бұрын
U mean dirty water not returning to dirty water tank???
@kaelanwong8799
@kaelanwong8799 8 ай бұрын
Yes the dirty water stays in the bottom of the basin only some drains out I think there may be debris in the tube
@pierturelli7562
@pierturelli7562 8 ай бұрын
The water pump activates if I give a few taps on the back of the charging base. Can someone help me understand why or how to solve it?"
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 8 ай бұрын
Plz check ur water tanks... remove rubber seals wash then & refix...plz don't Press too hard...if suction leaking then water always gives this issue
@phamhuy3698
@phamhuy3698 6 ай бұрын
The plastic cover are not designed well. Too hard to disassembly
@ecovacstechnicalsupport5278
@ecovacstechnicalsupport5278 6 ай бұрын
I agree
Ecovacs X1 omni station components introduction & How it works..
5:29
Ecovacs Technical Support
Рет қаралды 1 М.
Ecovacs T8 aivi How to Fix if reversing, How to assemble back, detailed video
34:28
Ecovacs Technical Support
Рет қаралды 2,9 М.
-5+3은 뭔가요? 📚 #shorts
0:19
5 분 Tricks
Рет қаралды 13 МЛН
Маусымашар-2023 / Гала-концерт / АТУ қоштасу
1:27:35
Jaidarman OFFICIAL / JCI
Рет қаралды 390 М.
Ecovacs | Deebot | Bumper is stuck. What's the reason & how to fix this issue??
18:30
ремонт+ разборка робота пылесоса Xiaomi robot vacuum S10+
16:54
Домашняя мастерская
Рет қаралды 16 М.
How to Fix? Omni X1 / Turbo feeling difficult in returning to Station & can't charge
10:07
Ecovacs Ozmo T8 aivi |  How to remove bumper & Top cover? detailed video
8:26
Ecovacs Technical Support
Рет қаралды 4,2 М.
How to Test & Fix if Ecovacs Deebot LDS assembly turning but deebot can't move.
5:14
Ecovacs Technical Support
Рет қаралды 2,3 М.
Ecovacs Omni X1/Turbo."Sink is Full"  How to Fix This Error??
6:31
Ecovacs Technical Support
Рет қаралды 13 М.
X1 Omni/Turbo | How To Fix This Error? " Please Clean The Water Tank"
4:08
Ecovacs Technical Support
Рет қаралды 4,1 М.