This easy editing tip in ArcGIS Pro saves me so much time. Support the channel - koji.to/@GIS.C...
Пікірлер: 80
@CubicLPАй бұрын
apprechiate this a lot!! great videos, greetings from germany :)
@GISChopsАй бұрын
Thanks for taking the time to make such a kind comment!
@somrinziАй бұрын
Appreciate it a lot
@GISChopsАй бұрын
You’re welcome! Thanks for the comment.
@macioluko94844 күн бұрын
Great stuff! Time saver for sure. In my case with polygons!
@GISChops4 күн бұрын
Thanks! I usually use it for polygons as well. Thanks for taking the time to comment.
@Raachen11 күн бұрын
Thank you, this saved me like hours of work!!!
@GISChops10 күн бұрын
It’s my favorite time saver. I use it daily.
@JeremyZimmerman Жыл бұрын
Another great one Jeff. I'm catching up on a few, but I always keep these in my back pocket for a refresher or when others ask me how to do things.
@GISChops Жыл бұрын
Great! Thanks Jeremy.
@josegarcinuno7232Ай бұрын
This was Great!!!!!,
@GISChopsАй бұрын
I’m glad you found it helpful! Thanks for commenting.
@janetjacobson9322 Жыл бұрын
YOU are awesome! I am learning so much from you! Thank you so much...
@GISChops Жыл бұрын
I'm so glad! Thanks for the kind comment.
@jeffm4827 Жыл бұрын
Thank you!!
@GISChops Жыл бұрын
You bet! Thanks for commenting.
@jccross8670 Жыл бұрын
Your channel is AWESOME.
@GISChops Жыл бұрын
Thank you very much! Thanks for the kind comment.
@Elingegoofy Жыл бұрын
Excelent! Good chop! Greetings from Montevideo, Uruguay
@GISChops Жыл бұрын
Thank you! Welcome to Chops Nation! Thanks for commenting.
@mohamedsalah6566 ай бұрын
Thanks 🙏
@GISChops6 ай бұрын
You are welcome, that’s a handy trick I use all the time.
@wvwoodshed Жыл бұрын
Sweet! Thanks and Happy Holidays!!!
@GISChops Жыл бұрын
Same to you!
@ulricehamnfritid5642 Жыл бұрын
Just the feature I've been looking for 🙂
@GISChops Жыл бұрын
I’m glad I was able to help you out. There’s more where that came from so be sure to subscribe and tap the notification bell.
@surveynevis36456 ай бұрын
Thanks for sharing.
@GISChops6 ай бұрын
Thanks for commenting!
@stormyf15 Жыл бұрын
Thanks for the information. I can see this being really useful.
@GISChops Жыл бұрын
It’s a handy trick to have in your arsenal. Thanks for the comment!
@jacksonward4363 Жыл бұрын
Quick and concise!
@GISChops Жыл бұрын
You know it!
@gershomejoni5951 Жыл бұрын
Many thanks! Super helpful!
@GISChops Жыл бұрын
Thanks for watching and taking the time to comment!
@RealisticRick2711 ай бұрын
I have used Arc for 4 years now. Not as a pro...not as an novice user.... but as a twice a week user as no one at work understand arc or what type of data to use or keep. Anyways.... these help videos always have me roaring in my guts. These tips and tricks that astound arc users have been developed 25 years ago in Autocad. No idea why Arc users seem to think its the absolute best program on earth for mapping. Its not. Its far from it. Its the biggest mindfuck in human history. Export your shape files to cad and save years of life on your soul. Also.... the match properties button in Cad is literally a half a second click with no other worries about uaing the command.
@GISChops11 ай бұрын
Thanks for taking the time to comment. GIS is more than a mapping platform, the power of GIS is the ability to analyze the data, not just display the data.
@gisdienstleistungen Жыл бұрын
This helps a lot
@GISChops Жыл бұрын
That makes me happy! Thanks for commenting.
@jorgecano8772 Жыл бұрын
You are a magician. Thanks a lot.
@GISChops Жыл бұрын
So nice of you to say. Thanks for the comment!
@alexthompson9403 Жыл бұрын
Freakin awesome!
@GISChops Жыл бұрын
It saves me so much time!
@CurlyCaker Жыл бұрын
That is fantastic! Thank you bunches!
@GISChops Жыл бұрын
Glad you liked it! Be sure to subscribe 😄
@ganesanganesh85572 ай бұрын
thanks
@GISChops2 ай бұрын
You are very welcome!
@mildmayheadless52172 ай бұрын
Why do you know so much 😂? Lol. Many thanks once again!!
@GISChops2 ай бұрын
I’m glad it was helpful for you! Good luck editing!
@asujan Жыл бұрын
Great one thanks
@GISChops Жыл бұрын
Thanks for the comment!
@ihtishampakhtoon51518 ай бұрын
It's very annoying when someone do digitization but still you have to make it correct.
@GISChops8 ай бұрын
Yes it is. But at least this tool helps fix it instead of moving each vertex individually. Thanks for watching and taking the time to comment!
@sokpiseth3896 Жыл бұрын
Wow it's a great video brother
@GISChops Жыл бұрын
Thank you sir!
@MImad-rv5gt Жыл бұрын
please make a video on Automatic Digitization of a map. if possible
@GISChops Жыл бұрын
Are you talking about converting a scanned map (raster) to features in a layer?
@MImad-rv5gt Жыл бұрын
Yes sir , exactly .
@GISChops Жыл бұрын
I don’t have any experience with that process. But I do have experience with hiring a firm to digitize some maps and I still had to do a lot of cleanup afterwards, so it seemed like I still had to do a lot of work to get the data to a useable state. What type of map are you trying to convert?
@MImad-rv5gt Жыл бұрын
@@GISChops ok sir , just a native map of my village
@GISChops Жыл бұрын
It may be possible, I haven’t had to do it before. Maybe look into raster to vector conversion tools, and maybe even some of the machine learning tools.
@84jesterx Жыл бұрын
had to edit my original comment..got too hasty with my question. SO I wasn't sure if this tool was more aimed at fixing polylines instead, and was searching for suggestions on how to fix this one "region" polygon in favor it being more accurate to my county one. Thanks for the notice!
@GISChops Жыл бұрын
Yes that would work. In fact, I usually use it for polygons instead of polylines. You may need to turn off your region layer so you are guaranteed to get the sketch from your county polygon.
@GISChops Жыл бұрын
Did you watch to the end? I demonstrate a polygon as well as a line.
@84jesterx Жыл бұрын
@@GISChops I did. And unfortunately using the Replace tool may not be the quick fix I was hoping, unless I can select a specific area "edge", and have that section replace it's shape to the reference polygon that I want. My County layer is accurate, but there are many, and my region polygon is FAR larger and encompasses many of those counties....and that's the one I need to fix.
@GISChops Жыл бұрын
Ah, have you watched my Align Features video? That may be your best bet. Or select all of the counties in your region, export them to a feature class, merge them together, then use that polygon to replace your bad region polygon.
@breannapairrett8675 Жыл бұрын
Have you done a video on rubbersheeting in Pro? I can't find many videos on it. I hate when I am editing a new subdivision and the curves don't match from a previous subdivision. Rubbersheet seems like the best tool, but I want to make sure I'm fully understanding how to use it.
@GISChops Жыл бұрын
I have not. I usually make older stuff match newer, more accurate stuff. I’ll have to look at it, I’ve never used rubber sheeting in my workflow.
@breannapairrett8675 Жыл бұрын
@@GISChops yea me either! My boss always wants me to go off the history and plat books and match it to that but to me it makes more sense to update everything to the new and still keep record (in the history feature class).
@GISChops Жыл бұрын
Living in the past. smh
@breannapairrett8675 Жыл бұрын
@@GISChops yea 😅
@phillippage-ex4ny Жыл бұрын
I am enjoying your ArcGIS Pro Parcel Fabric demonstrations. Would you consider creating one to show how you undertake spatial upgrade (improvement) of a section of ArcPRO Parcel Fabric. The scenario I am after is when a section of Parcel Fabric was originally built using inaccurate linework and the GIS officer wants to correct the spatial representation of those lots by entering correct COGO information for the lots from the source survey. The existing PF parcel lines have no COGO attribution, are mis-shaped and not in their true coordinate position. There is no new survey, so it would be a quality driven workflow. Currently we maintain our cadastral records in an Arcmap environment. We have a line and polygon feature classes in a topology (Not parcel fabric). To undertake spatial improvement, we replot the line dataset by COGO from a coordinated position and then rebuild the polygon feature class to match. I am trying to understand the best way to undertake this process in ArcGIS Pro parcel Fabric. In Australia we call this process "Spatial Upgrade" but it may be known by other terms internationally.
@GISChops Жыл бұрын
Do mean a least squares adjustment?
@michaelandrade1736 Жыл бұрын
Hey, I know that park!
@GISChops Жыл бұрын
I thought you might.
@cesarmendez26662 ай бұрын
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
@GISChops2 ай бұрын
🙌🏻
@user-ff2ip1bw7d Жыл бұрын
Can we use "INTEGRATE" instead of replace geometry ?????
@GISChops Жыл бұрын
Yes, if you need to make changes to many features at once, the integrated tool might be the way to go. This video shows a trick I use to replace an old feature with a new feature with a better geometry while editing.