electric go kart 775 made at home and reverse

building electric go kart 775 at home .12 v and 24 v and reverse

[@ronmartin3755]

I made an electric go Kart about 50 years ago. I took an old Sears & Roebuck 2.5 HP gas engine Kids Go Kart and removed the tired old lawn mower engine. I used a motor I found at a military surplus store where I lived. It was a huge motor and ran on 24 volts. Two Marine batteries in series made the power. I made a motor mount that would hold the electric motor and mount to the old gasoline motor mounting plate. It took me three tries at different drive socket sizes to get the kart to go fairly fast. In fact, it was much faster than the gasoline motor version! The acceleration was neck-breaking!

[@hyperdeez]

Crazy but who asked?

[@mlpggamers7580]

@@hyperdeez 🗿

[@TopTechSavvy]

@@hyperdeez Bros 5

[@nonarrativeboxingnunn9856]

What Kind Of Motor, Sir? I'd Like To Give It A Try.

[@nicolasgonzales2854]

Me encanto tu proyecto, ojala sigas enviando mas. te escribo desde la Heroica ciudad de TACNA PERU.

[@iwasanengineer8676]

Thumbs up. I could not have built one for my son without learning the details you showed!

[@javierorea4393]

Muchas felicidades es un verdadero proyecto ... Saludos desde México ... bendiciones...boy a realizar uno

[@atulabrol6533]

Excellent job. What was the cost of the project ? Have you considered making any more units ?

[@jogrev]

Excelente trabajo, amigo, todo una pieza de ingeniería. Gracias por compartir tu proyecto. Lo que queda es deducir los componentes que usaste. Felicitaciones. Tienes un nuevo suscriptor. DIOS siga bendiciendo tu talento!!!

[@nivardosanchezpereira7508]

Excelente, muy bueno voy a compartir, me hubiera gustado comprar se venció mi tarjeta que pasé la cuarentena

[@Vinhhienvlog_1983]

Great thank you for sharing good health

[@jesuscamacho6052]

Hola amigo filipo TV saludos,me encantó tu converción con esos motorcitos😲😁👋👋👍

[@multitaskperu810]

Excelente mi estimado!! sigue creando y compartiendo tus avances con todos nosotros. Saludos

[@TheBarnacleBlimp]

Fantastic build and a great go cart.

[@dgmenace73]

Amazing how those small and abundant motors perform. I've been into RC for 20yrs and wanted to do something similar. Great job!

[@RomarScott]

Im late but do u think they would be good on a tricycle for round town errands

[@theweirdo1977]

Great video. You inspire me to start my project I keep putting off.

[@peterross9541]

komplett "Heavy Metal" direkt vom "Hufschmied" ! Total "oldschool" ! Der absolute Wahnsinn !!!

[@ajayrabha93]

not nice vieo

[@rauldesousa8815]

... Sencillamente GENIAL, enhorabuena mi hermano. Exito y mucha suerte en todos tus proyectos.

[@jornaldanaizalla1632]

kzbin.info/www/bejne/qp6YZ5JugrWpqKM

[@osvandirangelo4288]

Parabéns trabalho muito bom

[@arinchaliha7974]

Had a MAMOD steam tractor as a kid in the 60s. Wonderful miniature machines

[@mattjohnston5807]

Awesome go kart. Everyone wishes they had a dad like you lol.

[@sunansilver6147]

Don't worry. He is your real father.

[@Lorica01]

XD , Savage

[@coffeecuppepsi]

finally someone gearing correctly. in so many of these home builds they use 1 to 1 ratios or even gear up thinking it will go faster.

[@theimagequestphotography]

So cool, my grandfather used to use a car starter motor to build his electric minibikes Cuba

[@thefishingline2391]

Good detail, thank you so much!!

[@alfredoaranedadiocarez3061]

Me gusto muchisimo el go Karting electrico, le quedo impecable👌, su video me servira para guiarme de como hacer uno pero con la diferencia que lo are con un motor de combustion (a gasolina), saludos desde chile🇨🇱🇨🇱✌️

[@WALTERCARRIONTORRESValiCT]

Excelente, felicitaciones.... éxitos en el proyecto

[@mahedihasan838]

Wow very Nice..

[@nidhishankarlingam1982]

Great job really appreciate you getting more technology and future you have

[@elvismontenegrolaime6040]

Buen trabajo, saludos desde Bolivia!!!

[@israelclaretisoares5522]

Parabéns pelo trabalho ficou perfeito

[@St.Eg.]

Советую использовать бесколлекторные моторы, и ставить по 1 на оба задних колеса. Ребенок наверно доволен👍

[@user-jm4zc3ux5k]

Ссылка есть на али?

[@St.Eg.]

@@user-jm4zc3ux5k, в поиск достаточно забить название желаемого

[@St.Eg.]

@@user-jm4zc3ux5k, есть отличный вариант, который еще и способ управления облегчает, вот: 7 543,96 руб. 10%СКИДКА | Новое поступление, набор для переоборудования 250 Вт для Common Bike, левый цепной привод, настраиваемый для электрического переключателя велосипеда a.aliexpress.com/_Aa4bBE

[@user-ru3ks8kq8b]

@@St.Eg. า

[@user-ru3ks8kq8b]

@@St.Eg. จตนยยตต

[@nestorzevallos3013]

Felicitaciones Fiipo, gran trabajo,

[@eduardog.p.8007]

FELICITACIONES FILIPO UN ABRAZO DESDE SJL - LIMA - PERÚ

[@jmmg79_]

yo tambien soy de lima peru :,v

[@kellinkarina2058]

Amigo quien hace esos go kart

[@enzorodriguez2341]

De ptm para hacer un kart eléctrico se podría poner un motor eléctrico más grande e ir más rápido

[@jmmg79_]

@@enzorodriguez2341 sierto :,v lo kiere para irse de pazeo :.,v

[@enzorodriguez2341]

@@jmmg79_ no men solo que ya he subido a los de la fórmula kart a webear un rato y me vacilaria ir más rápido :'v

[@juancarlososorioalvarenga1155]

Sos un crack! Toda una obra de ingeniería!

[@peterdahlmann6648]

Nicely engineered! Thanks for sharing your great ideas.

[@jeremycaguana2071]

Buen video, podrías hacer un video haciendo uno tamaño real (tamaño de carro) mostrando los pasos y las partes que uses? Es que quisiera montarme uno para mi

[@steventam718]

Great video. You inspired me of making one for my kids. What size is your sprocket? Link to purchase ?

[@dutriusar278]

Best video I have seen for making an electric cart with 2 small motors. Thanks for all the great detail.

[@arduinomaquinas]

Awesome, 😉👍very cool car 👏👏👏

[@yamarhabawahalla3237]

More than my expectation you did such a great job

[@jayshaw3971]

好嘢!谢谢你的视频，给了我很大的启发!。China HK

[@supernews04]

嘢!谢谢你的视频，给了我很大的

[@gortnewton4765]

Very nice job! Love it.

[@vegasboyorellana8205]

ok let me start saying that i enjoy watching the whole video your idea of building a go kart is really great

[@firstnamelastnameisallowed7943]

That thing moves pretty dang good!! Thats rad it has two speeds forward and reverse!! Awesome cart man, supper cool 😎 I love it!!

[@txiskobat]

DOS PUNTOS PARA EL ARTISTA. UNO DE LOS VIDEOS MAS ENTRETENIDO Y PRODUCTIVO QUE HE VISTO

[@gpower689]

I love engineering, I will love to start this.thanks for sharing your skills and knowledge.i hope to build this one day.waching from Nigeria.

[@Pacho53]

Genial el kart, buen trabajo! Cuanto peso soporta? Y cuanto duran las baterías?

[@gareng5599]

Thanks to the go kart idea, I'm making it for my granddaugther.

[@tebibyte2357]

@jason crigger That's exactly what I was thinking

[@tihomirtodorov8482]

@jason crigger not for the granddaughter!? :D

[@korakotlimteerawat2068]

jason crigger how much for sale ka

[@Tampaboys]

Great build bud really sweet footage

[@fabricio-alves]

- Great job but it is necessary to protect gears so there are no accidents by long hair or cords of some clothes getting caught. This is very important. - Ótimo trabalho mas é preciso proteger engrenagens para não haver acidentes tais como prender cabelos compridos ou cordões de alguma roupa.

[@artiew8718]

Not if you have no hair and wear no clothes.

[@suutsuut6738]

09lĺl

[@danielforde-pogson]

Nah...This is old school. Leave it all exposed and forget safety. That's what made the world great!!

[@rogerd4559]

My nephew lost his finger on his hand getting them caught in the sprocket of a minibike he was riding, trying to work the throttle

[@burnerjack01]

@@danielforde-pogson My buddies Scar and Stumpy said the same thing.

[@delfinorodriguezvargas4068]

Te doy like por todo el proceso que realizarse para tu proyecto . Sólo me quedo con la duda de que unos pequeños motores te soporten el trabajo por un largo tiempo.

[@alexandercubillosramirez8636]

Esta muy buena la idea, pero seria bueno que hiciera otro video explicando paso a paso lo que va haciendo y cómo se llama cada cosa que pone, como por ejemplo la clase de bobinas y batería más específica

[@bezolli]

Eu cobraria pelos detalhes e o esquema do projeto...

[@makecoolstuff9170]

Well done!

[@lechyfrancuzoff3254]

Очень хорошая работа: сделано всё, как на фабрике. Есть место, что бы наращивать аккумуляторы и моторы. Одно ведущее заднее колесо не требует дифференциала, но если сделать и второе заднее ведущим (зеркально), то инертность моторов будут сглаживать проскальзывания в поворотах. Однозначно лайк.

[@oswaldovelascomijares836]

tiene toda la razón👍🏻👍🏻

[@josegeorgemacielbarcelosba8331]

Muito top meus Parabéns

[@roybrenertchalantanta7852]

Muy buen proyecto amigo, solo tengo una duda ¿cuanto tiempo te dura la bateria ?

[@rufinonefitali24]

@Lucas Van Hamburg á44

[@adrianofofo1]

Muito bom ! Agora eu colocaria uma proteção na parte dos motores.

[@sinisterfire6641]

You are my hero. Great Job! Very interesting build. Bravo! Bravo!

[@filipotv]

thank you

[@AadityaKrishnaTambe]

What is the total cost

[@mahindrayorkshireterrier2.874]

eu adorei o carrinho motorizado, fez bem feito mesmo ate colocou uma bisina no carrinho, amei o carrinho ficou bom ;)

[@mikieftimov255]

⁹ ... .. Беровска .гајдс

[@sebastianzuluagacorrea4143]

Felicitaciones, que satisfacción ver estos vídeos tan prácticos.

[@azeemkaderbasha2794]

Chain tensioner 🤓 Accelerator 🤓 Gear switch/selector 🤓 Everything about this build was/is brilliant👍

[@user-lm1xb2xc6u]

Ууп

[@user-lm1xb2xc6u]

,

[@luckyhakeem3958]

Kerja yang bagus kawan, 👍

[@joshdavilasr.6519]

Thank you for just building and not talking. Enjoyed!

[@user-nw9rz8bc9g]

Молодец парень!!!

[@j-beatsimaginationstudio1987]

Fantastic job my friend!

[@sushisowal39]

Kya ji gadi Mai Ko mil sakte jawab na rahi hai

[@sandraalvesderesende4647]

Top fábricação parabéns 👏👏👏 ótima

[@vijaykumar-od7kx]

Excellent ! Design thinking ! 🙌

[@user-oe5ug8wd3f]

มันสวยงาม..มาก.. Fc..2020

[@aldemarbanguero1690]

Te quedó un berraquera, te felicito mi hermano, saludos desde Colombia.

[@pstjaimegarcia2892]

Amigo que tipo ee motor necesito para armar ese coche

[@aldemarbanguero1690]

@@pstjaimegarcia2892 Hola no manejo motores a batería, solo motores a gasolina 4 tiempos, ejemplo de moto Honda C-90 son geniales, potentes y nunca se descomponen.

[@platehair]

@@pstjaimegarcia2892 motor 775. Busca en aliexpress "motor 775" alo de 10usd y aqui te lo muestran kzbin.info/www/bejne/ppaqi56uqtibm6s

[@TechVegan]

Amazing....!!! Good Mechanical Engineer...

[@PopleBackyardFarm]

nice job this was pretty creative

[@wilmercardena9930]

Guaaoooo eres un genios para armar esos carritos felicidades y cuanto cuestan saludos desde Ecuador

[@juancarloshernandez303]

Qué tal buenas noches primero que nada una felicitación me parece que eres muy bueno en lo que haces y quisiera pedirte de favor si es posible pusieras nombres de las piezas que para saber cómo conseguir las

[@vioobien2242]

7. ..

[@MultiDarius82]

Hola muy bueno !! Quisiera saber las características de ese y donde lo consigo?

[@MultiDarius82]

De ese motor donde lo consigo

[@stealthop]

the gang switch from the gate latch is brilliant

[@Greg-io1ip]

Cute project. Just hope nobody over 100 pounds goes for a bumpy ride anyplace on it. But clever ideas and good skills. I enjoyed the video.

[@juliocascante8301]

Felicitaciones filipo de Guayaquil Ecuador

[@oscarsobrevilla21]

no es Perú?

[@cemkucuk3668]

Clean working, congratulations

[@VipinKumar-nl5qq]

Very Nice and fantastic very hard work

[@hugomayta1137]

bien ahí vecino! felicidades

[@juanmafernandez8387]

Hola, muy buen trabajo, una pregunta. Que tipo de motores as usado y donde comprar los materiales? Muchas gracias

[@toledodamian]

What welding machine are you using ? , please model & brand would be great.

[@syarifulalam]

LUAR BIASA, GOOD LUCK. FROM MAKASSAR OF INDONESIA

[@user-tk1tb8rt3i]

EXCELENTE VIDEO. ¿PODRIAS INDICARME QUE TIPO DE MOTORES UTILIZASTE?

[@precisionautoshop2380]

Excelente!!!!!!! 👏👏👏👏

[@franciscoaugusto9817]

Muito bom adoro mecanismos

[@neelamgupta1475]

It is really awesome bro. +1 subscriber from India

[@mulletover3832]

Great video. Felt like I should have been wearing eye protection!

[@Elizz65]

Oqmskwkxms121112⅔

[@Elizz65]

Pwlxmakd121223

[@Elizz65]

@@Karl.Car.tech.1 qwps!sc

[@pscc7037]

Esto es en Perú, muy bueno Bro!

[@user-ri5hi8zi4i]

Хорошая конструкция, вы с головой 👍🤘

[@biruns.a7607]

Bagus banget ini,kreatif & ahli

[@estructurasvegetaedwinmoro5996]

Gracias por compartir tu creatividad amigo

[@vladhunter872]

Где-то после 25-й минуты я уже думал, что он сейчас ещё и "АБС" и ESP начнёт монтачить... ЛАЙК!

[@rickyroaster]

Love the ingenuity of the speed controller, no MOSFETS here :)

[@CREVchannel]

I am curious, how does it work? What is that switch device called?

[@rickyroaster]

@@CREVchannel it's just a 2 way toggle switch, nothing more

[@CREVchannel]

@@rickyroaster Does it contain resistors or something internally to limit the current?

[@rickyroaster]

No , nothing to limit current apart from the lead batteries own internal resistance and the really low gears. The switches will burn out eventually. I doubt would work for long with lithium cells, too much current for those little switches.

[@CREVchannel]

@@rickyroaster Ah I see, a simple solution. I'm trying to build a gokart myself but the motor i'm using is from a treadmill. It operates at 90V and 25A and I've had trouble trying to find a suitable DC PWM controller for those specs.

[@alfredorabago5537]

Beautiful machine!!!!!!!!!!!!! Thanks a lot for share it with us. question: what kinf of motors are you using? br Alfredo from Argentina,

[@wildsilenthunter]

Perfect 👌👍 i like it somuch Keep it up

[@g.nawazafridi6819]

Is a very experienced man

[@Cruner62]

You should use the ackerman principle for the steering arms - point them toward the centre of the rear axle to allow the turning differential circle radius when turning.

[@miguelcastro6476]

muy practico buenísimo

[@agroscr]

Tek tekere motor konması sıkıntılı. Onun haricinde başarılı.

[@Iowa599]

You should have added a couple degrees of caster and camber in front (or subtracted, since they should both be negative). The tie rods should not be flat/bar stock, it's easy to bend and may resonant. Round or tube works well. Otherwise, it looks awesome! What are those motors?

[@farleyasouza1792]

É um gênio!!!!! Parabens!!!

[@captainamazing1356]

Love the design and engineering! I wonder how the DC 997 motors would perform they are the big brother to the 775

[@eddydg6297]

exelennte eso trabajo es genial . que genialidad amigo