Electrical Pro Tip #29. Understanding 10 Gauge wire. Be a Pro. Learn from the Pros.

[@djpaperdup]

everyday at 7:30 in California 😎 appreciate that knowledge sir🙏🏽

[@ElectricalCodeChanges]

That's awesome! Thank you for being a part of the code coach family!

[@yuyisimos]

As always, great info bro.

[@veggiepowered]

I'am Your Newest Subscriber Great Videos

[@ElectricalCodeChanges]

Thank you!

[@roryvanucchi2392]

good stuff

[@williamkakuno9843]

Thanks my brother that was very helpful I'm building a commercial truck stop and they're using mini splits I got to bring three 220 but I need MC cable and it's 35 amp so it's got to be 10 gauge

[@ElectricalCodeChanges]

Hey Brother! Good to hear from you! I would check your paperwork on Your wire size.

[@durvalrebelo2624]

Good explanation

[@ElectricalCodeChanges]

Thank you!!

[@matthewbeaver5026]

What about a dryer connection thats 10-3 no ground. Would it not run said display or blower motor? Mines wired 8-3 no ground no issues though. I did debate for a long time whether the neutral wire should hook to the neutral or ground connection of the dryer.

[@Armelmarcus]

I am going to pull power from an outlet down the wall and put an outlet behind my tv, would it be okay to use 10/2 to go from the existing outlet up to the new outlet I will be installing as that’s just what I have laying around?

[@SybilDefense]

I have a shop/addition that I want to have a 2 gang 30A outlet to run power tools and my dust collector. I also want to place and inlet for my Gen parallel kit (110v) to feed my backup circuits. Two Qs: 1) can I wire the 30A inlet plug into the two gang outlet and then into the house panel or do I need to run two wires, 1 into the house to the Gen in 30A breaker, and then another line out (from the same breaker or another separate deducated breaker?) to the shop outlet with 30a capable 110v outlets? I assume 10/2 is code for 30A for either application. Q2) from this 2 gang outlet box, I want to run two other 2 gang outlet boxes to give me flexibility of outlet locations should I need to run my saw a distance away from the dust collector (shop vac). Thirdly (I know I said only 2 Qs)... is it smart to tap a circuit of lights from one of these secondary 30a outlets, or should I run a separate dedicated 20A for my 110 lighting since I would need to use 10/2 for anything coming off the 30A circuit, but only 12/2 or 14/2 (?) from a 20A second circuit. Trying to minimize my costly wiring needs. Current-ly (see what I did there) I have two GFI circuits coming off existing 14/2(?) Outdoor (grey) wiring that used to power landscape lighting on a 15a breaker, but I can't use an amp hungry circ saw with anything else (oil heater, another saw, the shop vac) on this circuit. I need more power! Thanks... I know you're busy and appreciate your thoughts, especially about the Gen inlet => 4 outlet => 30a breaker wiring as upcoming weather has me in need of potential back up.

[@robertmorgan8104]

Quick Question: Is 10 gauge stranded ok for dryer conduit runs…or solid only?

[@jjoseedlopez]

Heyy please help, it's okay to connect two 10 gauge cables to fit the enough length from the box to my dryer or I have to ude a single cable I have like 20 ft And I need like another 10 what you recommend me please!!

[@johnstancliff7328]

you would have made a great salesman at a hardware store!

[@estevangarcia9499]

im wanting to wire up a 30 amp plug for my RV, i was thinking of using romex 10/2. but our local electrician suggested 10 gauge wire, not romex. im confused, does " 10 gauge" have separate wires like 10/2?

[@ElectricalCodeChanges]

Romex cannot be run outside even if it's in conduit was probably the reason for his suggestion, I would give him a shout back and see if he will work with you and also make sure you work with your local electrical inspector! Thanks*

[@estevangarcia9499]

@@ElectricalCodeChanges thanks

[@edadan]

I ran 38’ of 10/3 for a 6500W generator to my breaker panel. I’ve read that max is 30’ and then I should go to 8/3. Any opinion you can share?

[@ElectricalCodeChanges]

Defiantly work with your electrical inspector. but its likely going to be 27 x 1.25 and then size your wire.

[@WiSeNhEiMeR-1369]

Thanks COOP ..

[@ElectricalCodeChanges]

🤘🏼🤘🏼🔥

[@vyger6336]

Can you put a 40amp stove on 30 amp wire.

[@DeagleBeagle]

Why are some 10 gauge wires not rated for 30 amps? I would think they all should be rated for 30 amps and 3,600 watts.

[@sklee1644]

New dryer is not hard wire. They all come with a plug. Thanks for sharing.

[@ElectricalCodeChanges]

You got it!

[@Lloyd33]

110 + 110 = 240 'MURICA math!!

[@lancerudy9934]

Six hundred volts!