Two Gang Switch diagram-How to connect it-Electrical house wiring of 2 gang switch

PLZ subscribe and like
to more videos
To subscribe to the channel
/ @electricnology

[@juansaenz5005]

Very nice. Clear and to the point. Thank you.

[@mustafaadan5012]

Thanks that's amazing great electrical idea video channel I like it Bless

[@aceman2790]

Thankyou...very grateful 🙏

[@danladijohn1731]

Beautiful ❤️ Thanks

[@haranms283]

Superb explain

[@ByiringiroIrene-dc7cv]

Amazing. I can give you Fantastic

[@Khannkemchop]

Thanks much

[@solida333]

Hi what if I have 2 neutral line for two light in one switch. I just bought a 2 gang switch with 1N port, but I see my old switch has 2N line. And I try to combine it into 1N but only 1 light is working. Maybe my two light use different N line source? Is it possible to combine those 2N together then I can put it in my new 2 Gang switch?

[@electricnology]

Do the two neutral lines share the same neutral bar in a D.B If the two lines are from two different distribution board, only the common lamp in the line and the neutral of the same distribution board will work

[@Niyutechnology]

Which setup design this circuit connection testing

[@riteshsinha5900]

What's the use. When it's one way you can use normal switches.

[@allycassim4926]

Good video, I'm into DIY, however I have an issue. Connected everything up, when I switch my second on, all the lights on and the lights flicker...any solutions..

[@electricnology]

You may have tied the two sides of the key from both sides Connection between the two sides of the switch is carried out on one end

[@AhounzeuDongmoRodrigue]

Like it

[@olehuchenna3218]

What if the wire dosent have earth wire

[@aungkoung0075]

Useful. Thanks.

[@zahraawalaa101]

Thank you for this video

[@amitlamalho]

Thanks ❤

[@anslem4494]

Thanks

[@Steve58200]

This is not a safe way to wire a light system. There is no earth at the switch which is potentially an exposed conductive part. Under fault the user would get an electric shock. This would not comply with wiring regulations in the UK

[@electricnology]

Looks like you didn't watch the whole video The ground wire is connected to the circuit The electrical circuit according to UK rules

[@georgegeorgel7254]

@@electricnology yes but the switch must have ground attached as well thats the whole circuit not only the lights

[@BigBlueRabbit]

@@georgegeorgel7254 Yes. If a live wire touches the switch plate it will not be grounded so you will get a shock if you touch the plate.