Display examples - which one to use?

$2 for 10 PCBs & $6 for stencil: jlcpcb.com
Here I show you a short example for each one of these displays. Below you have the schematic, library and an example code for each display. Thank you!
Help my projects on Patreon : / electronoobs
my Q&A page: electronoobs.com/eng_preguntas...
Canal en Español: / electronoobs en español
PRINTERS
-------------------------------------
Ender 3(155€ AMAZING): www.gearbest.com/3d-printers-...
Coupon(142€): "GENDER11"
SparkMaker SLA: www.gearbest.com/3d-printers-...
Crealitu CR10: www.gearbest.com/3d-printers-...
Coupon code: "11CR10EU" or "11CR10US"
ANET E10 (219$): www.gearbest.com/3d-printers-...
Coupon code: "Anete10us"
TEVO Tarantula (175$): www.gearbest.com/3d-printers-...
Coupon code: "Tarantulaus"
Creality CR10 MINI: www.gearbest.com/3d-printers-...
COUPON: CR10MINI
Anet A8: www.gearbest.com/3d-printers-...
Coupon code: "A8KIDA"
-----------------LINKS-------------------
-----------------16x2 LCD without i2c-----------------
16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------16x2 LCD i2c-----------------
I2C 16x2 LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------128x64 OLED i2c----------------
OLED I2C: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------NOKIA 5110 SPI---------------
NOKIA 5110: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments with MAX7219 driver---------------
7 segments MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------7 Segments serial LCD---------------
7 segments LCD: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------Dot LED MATRIX with MAX7219 driver--------------
Dot MATRIX MAX7219: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------e-Paper display--------------
e-paper display: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------ILI9341 TFT display------------
ILI9341 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
-----------------SSD1289 TFT display--------------
SSD1289 TFT: www.electronoobs.com/eng_ardu...
Schematic: www.electronoobs.com/eng_ardu...
Image2LCD software: www.electronoobs.com/eng_ardu...
Like share and subscribe to motivate me. Thank you
#display #Arduini #LCD

[@ELECTRONOOBS]

Want to help my workshop: www.patreon.com/ELECTRONOOBS Thank you so much!

[@Osmanity]

Everytime i get notifications from you it makes my day. Thank you for awesome videos as always!

[@ELECTRONOOBS]

Thanks to you for the support!

[@andreitcaci4924]

This is such a cool and well explained video! Thank you as well for all the codes posted underneath to play with. Subscribed)

[@joshuaoduroadu5376]

Very nice and concise overview of the varied screens available out there. Thanks so much for this.

[@stonetechnology]

🤩stone LCD display is professional

[@Aceino]

Very helpful, thank you! I'm new to the micro controller world and this was very useful.

[@lalchandra4590]

Thanks Electronoobs. I really need this kind of video. This video answers many questions of Arduino beginners.

[@sayantanpal7953]

Thank you so much for the explanation.. now I can choose different displays which is most preferable for my projects

[@stonetechnology]

🤩stone LCD display is professional

[@jigsound]

What a comprehensive presentation! The I2C protocol is such a powerful and simple solution to a lot of simple tasks. 👌

[@LemmyCaution66]

A fantastic video/project. I just got myself a 5” MP15001 touchscreen for my Raspberry Pi 3B + and 3A +. I was looking for extra screen info and again I found it here.

[@stonetechnology]

🤩stone LCD display is professional

[@mfalme254]

i really enjoy your video. THANKS FOR THE OVERVIEW. i prefer the DSD screens because needs fewer pinouts.

[@Ayush-tl8se]

Well, great video. Keep it up. It gives us good knowledge. You r doing great job. Thanks for making videos like this.

[@Nicksperiments]

Whenever tft displays stay just white, it’s usually a wiring problem so make sure everything is soldered correctly and that no wires have broken

[@72mgmidget]

I would really like to see you getting the touch screen display working with your Arduino, even if it means buying a shield. I have a number of projects in mind to try to build and it would be great to eliminate the need for any other pushbuttons or keypads, just a power on/off switch. Thanks. Very informative video. You obviously put a lot of time and effort into covering such a wide variety of different displays and how to wire them, and the associated code to make them work - well, most of them, at least :D

[@joetke]

Thanks for the review. It's instructive. I'm interested mainly in the largest display that didn't work...

[@sadunnakipoglu9471]

Thank you and appreciate your effort. Greetings to you from Turkey .

[@contentex1]

Thank you for so great video! Would you please add a video with operation temperatures which that displays can work? Thank you again!

[@Taran72]

Wow! Great tutorial!

[@bharatghori4422]

very nice introducing to displays thank a lot

[@muhammadizzhakimi3355]

nice presentation , good work

[@stephanedenis5394]

Good review, very interresting.

[@Kickin0u0in0the0nut]

Just stumbled on this channel so happy!

[@daigriffiths6476]

Yes thanks, even more would be brilliant. Great videos.

[@undamned]

Nice overview!

[@parameshpavin2708]

Nice video,it is nice to see e paper displays working,my suggestion is to make more informative videos on e paper displays but overall it is good👍👌

[@prithwishs.1488]

Thanks a lot for this presentation

[@Bianchi77]

Nice video, well done, thank you for sharing the knowledge with us :)

[@leehewitt9559]

Great video many thanks for sharing

[@raybright5805]

Excellent summary.... I'm now subscribing to your site

[@colasmaroc8435]

Great work, think you very much

[@Moosetraks21]

this video must have been a lot of work! great job!

[@SIKHGT650]

Liked and comment first , than watched video....great video...thanks bro

[@MCsCreations]

Fantastic, dude. Lots of options! 😃 I need to get into Arduino as soon as possible...

[@daveyjones5702]

never been a better time for it :)

[@MCsCreations]

@@daveyjones5702 Great! 😃 I didn't buy an Arduino kit yet because I'm buying stuff a bit expensive... Things to use in quadcopters and rc wings/airplane builds. 😃 I still need a 3d printer too... But, eventually, I get there. 😊

[@yadwindersingh9494]

Superb video Helpful for me .......I learn something new techy today

[@RishiKumar-zv3lc]

Wow.......I really wanted a channel like this ❤️ And, I got you 👍 Thank you.. .. ... ... ❤️

[@batica81]

For 128x64 OLED i2c you are actually using only 32 lines in the example. You need to change the default value in the library file Adafruit_SSD1306.h to #define SSD1306_128_64 It will look much nicer :)

[@viniciusnoyoutube]

Very good! Thanks!

[@dellodel9502]

Very good video Thanks

[@devdharma3050]

Your videos make me want to learn electronics :)

[@JuraganLED]

I like honest videos like this, you included part that it failed to do so

[@Cdswjp]

thank you for this video

[@kranthi143B]

Excellent sir

[@isoguy.]

Awsome video and cannot wait to use some of these in my projects, would like to see a detailed use of oled display showing results of relay activity e.g. relay normally open activated, temperature of room is......., on oled, house cooling fan activated on oled, heater activated on 9led etc. Thanks for sharing

[@shoppingoneclick2044]

Nice information... My suggestion is, please make a playlist on latest LCDs, Ic2 based lcd...longer lcd, TFT Latest touch screen, HMI etc Explain difference.

[@revolution5547]

love your vids

[@aaa72317]

That banana deserves the like, well done.

[@sarigaraj]

Good video, thank you:)

[@attalaw36]

good lesson thank you

[@cheri758]

7:32 that lcd lit up for a moment

[@harisuresh2507]

I SAW!

[@Neuron43]

Interesting stuff! I have an old Home Theater PC case from nMedia that offered an optional 16x2 display which could show all kinds of information like song titles and volume level but the screen seems to have disappeared from online stores. I downloaded the software for it from nMedia in case I would find one someday. Any idea where I could find one? Thanks

[@EmersonCapuano]

You,ve earned another subscribe 😃👍

[@YoDay]

Perfect video :))

[@jvguitargt]

Hi! I have some devices that use the Oled 128x64, However I've noticed that some of of them are faulty (dark spaces, missing characters, etc) Do you know if this kind of display can be cleaned? or is it better to replace them?

[@kaspariito]

hey. thank you. Can you please add the link for the 16x2 serial module to control the display (the one that we can use to use less wiring) Thank you for all the awesome content you create!!! :))

[@Digitalcreator9165]

Nice video.

[@zUltraXO]

One thing you missed: For the I2C character LCDs, you don't need to use A4 and A5, you can just use the dedicated SDA and SCL pins on your Arduino.

[@GurmanDhaliwal]

It’s faster that way too, the analog pins will just emulate the sda and scl so will be slower than the dedicated ones

[@zUltraXO]

@@GurmanDhaliwal well testing with a multimeter shows they're they're the same pins with different markings

[@vivekvenkatsubramaniam437]

How do you find out how much power these screens pull? I assume those LCD displays with backlights draw a lot of current? Am I right in assuming that the smaller the screen, the lower the current consumption?

[@saliksheraz6236]

Best tutorial

[@nantayalert5834]

thank you

[@Livefreeman]

nice video. we all love you. keep up the good work. show us how to display pdf or ebook on e-paper.

[@ximos8824]

You didn't mention nexion display i think they are quite good

[@ELECTRONOOBS]

@@ximos8824 Next week video is all about that

[@SPECIALVIDEO]

awesome dude

[@MouseWanted]

can you explain why every tutorial i watch and read use D4, D5, D6, D7? not D0, D1, D2, D3? or, do you have some documentation that I can read? your answer will be very helpful. thank you

[@dukefleed8369]

Which is the best display that can allow adding more than one code for multiple operations?

[@ChrPeter]

Thank you for this video. I am currently working on a data-logger with the NOKIA display and the SD-cardreader/clock shield. Have you ever combined these? I am having difficulties using these two libraries: a) and b) It appears to me that they are not working together. Any thoughts? (Used pins for the NOKIA display: Adafruit_PCD8544 display = Adafruit_PCD8544(7, 6, 5, 4, 3);)

[@guzman-do]

Do detailed OLED tutorial, pls!

[@johnjoyce]

Definitely not enough good OLED tutorials out there. Great suggestion!

[@elabinnovations]

128×32(OLED 0.91)

[@ranjiths7627]

128x64 oled display only displays 1st row whatever the cursor value and shows like snow on bottom full 7 rows How to get it work properly, it was like that when i brought, i thought my codes are incorrect, then i uploaded library example program, the same problem again

[@doyouknow3483]

Very good

[@yashshah7137]

@Electronoobs how can you show your battery percentages in oled display i want to know the process. do help if possible. thanks in advance.

[@chk1414]

Try u8g2 or u8g library with oled displays

[@efvarela3]

Great, oh may you please explain how to use them in parallel with another SPI module?, for example the nrf24 module. Wiring LCD is so simple but actually i am having some noise pixels, connecting the ST7920 and nrf24. Is it necessary a decoupling capacitor for LCD too?.. Your vids are awesome

[@Gameplayer55055]

I have some questions about displays: Why e-paper display blinks? Can it change only updated area(kind of double buffering?) My nokia 5110 has weird crystals inside, so it looks horribly and covers some display area. Why? have I damaged it, or it is factory defect? I heard that screen libraries are shitty and grabs all memory resources. So I should write own libraries, and which is better?

[@paulgupta2454]

What display would you recommend for people with low vision? I am building a things for people with disabilities who need larger letters to be able to read them. Not even large displays just like a 3 inch or so screen that could display "Volume up" for example

[@ashok_ign5623]

thanks sir

[@Wilson84KS]

How did you get your own logo as bootscreen with the adafruit library? As soon I call a bitmap in setup routine the adafruit logo shows up :/ Very informative video, my favorite is the Nokia LCD, I just love it, it's not only the price, but also the possibilities, I can show big letters and numbers but also build a menu with small letters and numbers and also print bitmaps, my first one for Arduino I got from my Nokia 3310 where I worked a long time for as I was a teenager, I had luck because that is one of the LCD's with golden contacts on it and not that stupid rubber that never works again properly after touching it once.

[@rajendrapharmacist]

Thanks

[@amkp40technology]

Nice.

[@mohamedesalem]

So usefull

[@adrianovergara1784]

Can you make a 2.5 - 32 volts automotive logic probe with volts display for tutorials?

[@jayakarmanoharan3947]

Can you suggest which display is best for out door environment??

[@wotesi]

Thank you for video. I have a question - I have Graphical LCD 128x64 screen. Would you please suggest me what library should I use? In my project I just need simple text print, small enough to be able to write several lines. P.S. the screen I have it has controller: ST7920 and it is of this type: HJ12864ZW. Thanks! BR, Valters

[@jaimem1918]

Hola, necesito ayuda, tengo un LCD tipo TFT, el modelo KMR-1.8 SPI, he probado varias conexiones pero me sigue saliendo la pantalla en blanco.

[@ravichandel8690]

epaper and other i really like please make more detail video and how can i learn electronics and do this type of projects

[@a6dulsalam511]

where lcd 64*128 ST7920 ??? whyyy 😢

[@mindaugasvaskevicius1818]

Are you considering making a tutorial for some of the displays, but in C, C++, or assembly? I'm not quite an Arduino person.... I prefer my code to contain interrupts and as least NOPs(delays) and DO NOTHINGs as possible.

[@timeltdme4355]

your channel name is so true

[@RETROGAME-FIX]

Hi. Is it possible to build synchronized multiple screen with one arduino controller to show live feed with a camera?

[@themaniac5864]

i need to make a stopwatch so the display needs to refresh fast 7 segment or matrix better? using an arduino nano

[@EasyOne]

nice

[@mlupdate1678]

the library you used for OLED display can also use in any type of arduino module?

[@hemantmundhe6662]

Nice video,please make anther tutorial video for 12864 graphics lcd display.full details.thanks bro

[@Farizno]

Thanks again for another great video. I do have a question. I am following along with your example for the 128x64 OLED, and I have installed the libraries as discussed, however when I try to compile the code, I get an error that DS3231.h: No such file exists. Can you help with this? Thank you.

[@ELECTRONOOBS]

Oh, remove that DS3231 line from the code. That is for real time clock. No need for that!

[@krnaslife9398]

Can you make a explain video of fingerprint door lock with circuit and wiring

[@baluk3182]

0:37 have you noticed that the subscriber count went from 71k to 67k ! ☺☻

[@kingdavid4463]

Better not ring that bell in the future.

[@rujanshrestha6730]

It means, pressing the bell icon will decrease his subscriber.

[@Vimlesh-Kahani]

Please make a tutorial on Paper Display Technology. I am thinking to build my own Kindle version eBook reader

[@sneakyplays101]

im using color tft touchscreen for my project

[@topten7064]

Great

[@MrTigger015]

some TFT displays are working at 3.3v and others run at 5v

[@xGOKOPx]

Fortunately, Arduino provides you with both

[@gl0sek]

I would love to use e-ink screens in my projects but they are way too expensive. For me the best one is the nokia screen. It's cheap and gets the job done.

[@Livefreeman]

you are right, they are too expensive. it's cheaper to buy a used e-reader and extract the display out of it. I have seen people selling e-readers with 5 inch display for like 15 dollars (used). I was wondering if someone was able to extract the screen and use it on arduino. I am just not that knowledgeable in using e-ink dispaly. if someone tried extracting e-display from a e-reader, and used it on arduino, please share the link because I want to try this project.

[@gl0sek]

@@Livefreeman I don't think it's that simple. Most likely there is some proprietary communication protocol with e-reader screen. You would need a driver or a lot of reverse engineering. That said I would love to know how people do this kind of stuff.

[@KamilHisoka]

I would like to see more Videos with the NOKIA 5110 display.

[@broodland]

Thnak u

[@izzatsd7882]

Hi please make a project stator winding for 3 phase/bldc motor..for your next project..

[@bichismasher]

what about that banana display??? can you provide the library for it? it will be useful