Just ordered mine (Mars 3 Pro). First printer. Very excited. TY for review.
@GrayScalpMiniatures Жыл бұрын
Nice! Hope you enjoy it!
@Del_Scorcho2 жыл бұрын
Fantastic review. Thanks for the settings as well. Hoping to pick one up at the end of the month when I have a little more time on my hands.
@GrayScalpMiniatures2 жыл бұрын
Great stuff, I hope you enjoy it when you get it! If you've got any questions about it, feel free to reach out.
@Addictedtoludus2 жыл бұрын
First resin printer I've ever had. I've been using it for almost a year now and have only failed at a couple of prints. I also installed the screen protector and haven't had to change any settings. It is an amazing printer, fast and reliable. Think on the first fep cleaning I used pretty abrasive paper and slightly scratched it. It is still printing as if nothing had happened. I have done 30 prints still not the first fep. I can also say that I do not have any problem with resin splash. Instead I had problems with the system of wash Elegoo, doa on arrival.
@GrayScalpMiniatures2 жыл бұрын
Great to hear yours is going so well. Shame about the wash system. I've got one and had no issues, and absolutely love it. Guess it's just down to luck sometimes.
@padwoofpadwoofington31512 жыл бұрын
Worth noting that the second revision resin tanks for the Mars 3 do have the pouring notch, as well as the replacement tank 2 packs. I've also not ever had the resin splash in either of my Mars 3s, nor have I heard of anyone else having that issue, that's a really weird issue.
@GrayScalpMiniatures2 жыл бұрын
That's good to know, might need to pick up a new tank! Yeah the resin splash thing is really odd. I've seen a couple of people mention it, but definitely doesn't seem to be widespread.
@padwoofpadwoofington31512 жыл бұрын
@@GrayScalpMiniatures at a guess the only thing I can think of that might be causing the splashing is if the print is holding on to the fep and essentially 'pinging' the fep upon release. I'd be curious to see if it still occurs if you lubricate the fep, not saying that's a workaround or solution more just an experiment to ascertain the root cause
@liverpools2 жыл бұрын
Love mine
@PhthaloGreenskin Жыл бұрын
Would this printer be good for printing vehicles and monsters for warhammer?
@toxicantConsumer2 жыл бұрын
been actually considering picking one of these up for a while but this really sold me on it. would you say that the wash and cure system are worth picking up as well?
@jtrain99262 жыл бұрын
All my friends that 3d print recommend it, resin is really messy and dangerous to handle. With a wash station you just put the whole build plate into the wash, no fussing around. Then you need to cure the models anyways so it's win win.
@GrayScalpMiniatures2 жыл бұрын
100% worth it. I did a previous video on it and before having one printing kind of get like a chore because the cleanup can be such a pain. With the wash and cure it takes so much hassle out of it.
@steffenseifarth50582 жыл бұрын
have one as well and printed 7l with the first fep. (but should changed it sooner^^ had some failures with the last l). funny, i also once forgot to tighten the screws and thought i must be the only person who is that "dumb" (no insult intended). i personally had no problems with splash or the weight of the construction. but i also miss adjustable feets. my favorite resin is the phrozen aqua grey 4k and my budget choice is the anycubic eco grey (careful not to overcure it or it gets super brittle, but great for bigger terrain stuff). both resins are nearly odorless and very easy to clean. the quality is near to perfect with a layer hight of 0,02/0,03 (i print mainly 15mm or 28mm) since the mars3 is supported by lychee slicer i can and will fully recommend this printer to everybody who wants to start with resin printing for miniatures.
@GrayScalpMiniatures2 жыл бұрын
Haha, no insult taken! Glad I'm not the only one.
@goresk88692 жыл бұрын
how many ''Artisan guild'' infantry type can you get on a build plate and also those trolls
@GrayScalpMiniatures2 жыл бұрын
So from the latest set I got 10 draugr on one plate. The trolls I got two.
@swiftdetecting2 жыл бұрын
Will theses settings work on the new Saturn S machine for minis ? and maybe printing a tank as well ? using Elegoo ABS LIKE
@javikeo41122 жыл бұрын
where can i find the modules at 1:33
@GrayScalpMiniatures2 жыл бұрын
They're by Artisan Guild, called Requiem Brotherhood.
@PantsReduction2 жыл бұрын
Guaranteed I will drop one of those screws right into the vat.
@GrayScalpMiniatures2 жыл бұрын
Now you’ve said that I know what I’m accidentally doing next time 🤣