Elegoo Neptune 3 Pro - 3D Printer - Unbox & Setup

[@JustVlads]

New Channel: www.youtube.com/@Just_Print Neptune 3 Pro: geni.us/vzwO Recommended: geni.us/JustVlads

[@MrGerhardGrobler]

Subscribed

[@shuchithkumar3576]

I wanna buy into India Karnataka help me please

[@shuchithkumar3576]

Subscribed successfully 😅👍 my support to you always bro

[@TheAliceQuo]

I knew I made a good purchase. This video confirmed all my research AND more. Thanks for uploading it. I got my mars pro about 2.5 years ago now and I've loved elegoo ever since and this printer showcases exactly why. The engineers at Elegoo are really upping the ante, and putting other manufacturers to shame with every new release.

[@markusallport1276]

I don't know if anyone looked close enough to the motherboard but, it is fully up-gradable for dual extruders! All sockets with pins outs are populated, so that means if you know what your doing you can up-grade this to a dual. there are 3 fan outlets and they are compatable with a 12/24v option, just set the jumper pins. there is added connector already there for the hot end of the extruder #2.

[@SovietCaptain03]

I just orderd mine, can’t wait to print! This will be my first 3d printer

[@O-RoD]

Where'd you ordered it from? Apparently it's sold out everywhere

[@SovietCaptain03]

@@O-RoD I bought it from a dutch reseller. But it’s sold out there aswell. Next batch will be 6th of January it says

[@O-RoD]

@@SovietCaptain03 thanks for the info! I'll keep an eye out

[@SovietCaptain03]

@@O-RoD no problem!

[@brutegov7361]

I ordered mine half a week ago, just shipped out today hopefully will be here on wednesday, i read many bad reviews about the dutch retailer (im dutch myself) so didnt order it there, just ordered it on the elegoo site as soon as i saw a restock (happens quite often but sells out in like an hour or two)

[@7771717]

This will be my first 3D printer thanks to your advices. Thank you so much for taking the time to instruct us!

[@7771717]

@justvlad Thanks for the gift!! I'm so happy about it! Just amazing!!!✌

[@raxuk_]

justo me la acabo de comprar y estaba mirando videos y eso, que tal te va?

[@biggsy9310]

@@7771717since it’s been a year how is your 3d printing journey going? I want to get started but I’m not sure if it’s worth the money or not

[@TheNextDecade]

Solid vid! I was confused as to why my machine had a slight wobble after assembly, you helped greatly! I'll be sure to link people to this setup guide. You did a great job explaining everything I missed in my first impressions stream.

[@tesoufgc]

Can't wait for this to be available in Canada, still out of stock in their website...

[@darenramirez1]

Ordered one of these ! Just going to watch your video as i set mine up 🤣 screw the manual ! Lol thanks man appreciate ya !

[@doom3637]

Thank you so much for this great video! You got my daughter and I up and running and enjoying her Christmas present immediately! Including the software settings was especially awesome of you. We made a Benchy with your settings and one with the Normal default settings and yours came out a lot better while using less material. Thanks again! Hope you have a happy New Year!

[@stanleyhoptroff]

is your printer still working well

[@thomasschuler5351]

Looks like this will be my first 3d printer, after watching this video, no more of my questions were left. Thanks mate

[@krisp8725]

Great video... Some great tips on assembly and excellent job explaining things. I've liked and subbed

[@gerardwiesel559]

Received my Neptune 3 Pro yesterday and put it together today. Currently printing a XYZ cube after Buddha. Overall it's a nice little printer for the price. However it appears that they are in a rush to get them out the door. The bed was quite loose and had to be adjusted. The print head was also loose and had to be adjusted. The X&Y belts also were loose. The belt at the top for the Z axis is very loose and there is no adjustment for it. It's quite useless for keeping the Z axis tied together. But after adjusting everything it seems to work quite well so far. Can't be beat for the price.. Gerry

[@gerardwiesel559]

Printed a benchy and a Axolotl after words and both came out great. This printer runs very well at 60mm/s...

[@odub5720]

would you print any faster?@@gerardwiesel559

[@paulw4259]

Yeah mine was like that, but it also had another fault that took me a couple of days to fix. When I got it, even after the adjustments you mention, it couldn't print the Buddha or even the tool holder. It's all good now but it was really disappointing.

[@Allan-r8i]

Haha when you blacked yourself out of the screen. Thanks for the laugh and for the great video.

[@3dprinting53]

Is everyones z offset the same like -1.22mm or does it differ because mine came out to be -1.70mm

[@INotR0B0t]

It is normal for it to be different. Mine is over-2mm

[@laprizzle7587]

Wonder how this stacks up compared to the ender 3 s1/s1 pro

[@julesrodriguez816]

I have both of them and they’re very similar in print quality and hardware. The only difference is that it is a little bit better to print abs on the s1 pro ( it has lesser warp problem).

[@theargus73]

Just got mine and followed your video, Buddah came out Perfect! Thanks!

[@peterhenkel9957]

There is a new CURA Version five . 3 which has neptune pro profiles installed!

[@marknichols7861]

Did you measure the calibration cube to see if it’s accurate dimensionally? What’s great and thorough video!

[@robyone7729]

Just ordered. It's my first printer. I hope I don't have any problems. Thanks for the great video! edit.The printer arrived today. Assembled in 20 minutes (it's easy), calibrated the plate, lowered the z axis slightly and sent the little Buddha to print. It turned out fantastic!!!!

[@flightofapaullo72]

This printer looks great! It will be my first printer, so thanks for going over it. Absolutely great video! New sub.

[@stanleyhoptroff]

how good is it might buy one

[@ImTylxrX]

Just wondering. Where do you find these models?

[@mafs13]

So I've gotten this printer a week ago, the test Buddha ran beautifully, but got some lifting on other print. Anyway just wondering what the little blue tube is for, does anyone know?

[@christineabrams5578]

I'm ordering this today because my acquila literally blew up a few weeks ago. God this is easy assembly 😅

[@willriggs3409]

Awesome job! I got lucky and have someone locally who got the pro by accident instead of the plus so I’m grabbing it from him Tuesday. Your video was one of the best I’ve come across, so great job again!

[@natemartin9283]

Just got my machine yesterday and I'm using the steps you showed to set it up. Thanks for a thorough video.

[@Ezunit1991]

Hi, question for someone looking to get into the FDM hobby from resin. I want to print dnd terrain. Even have plans for a large scale airship battle. Would you recommend this (I have a mars 3 pro) or the ender 3? Maybe another?

[@scottyrodeo]

Great video! Its the first 3D print video I've seen and makes me confident in being able to set up my Elegoo that just showed up today! Thanks for making such a detailed video!

[@JDMRaw]

bought one this morning. I knew your review wouldn't disappoint. in fact I'm that much more excited to get it!

[@fundooguy316]

Great insight and video !!! I am planning to buy my 1st 3d printer for helping with custom parts for a robotics team doing First Tech Challenge. I am kind of sandwiched between - ELEGOO Neptune 3 Pro vs Creality Ender-3 S1 Pro vs Bambu P1P. From a pricing perspective currently Neptune 3 Pro seems to be the best. Also from use case perspective for our robotics needs, we need parts that are rugged, sturdy and can withstand collision from walls and other robots. Our thoughts are to print mostly using PLA, PETG, ABS, TPU (few cases). Don't think any of the 3 printers i mentioned can do Carbon based filaments. Is that right ? Need your guidance/suggestion on which of the 3 to pick and which of these requires least tinkering or accessories and can work pretty much out of the box for the kids to help with their STEM Robotics activities. Please suggest and help.

[@mattiecreates]

Question: Is Elegoo open source like Creality? Definitely selling my Ender 3 S1 as soon as this is available to me. i have had nothing but issues along with everyone else.. this looks way way more promising .

[@Platoface]

Yup, like others just ordered this printer as it will be my first. $229 is the price point for me to jump in.

[@atticuscorbitt8199]

Nice! My cousin actually turned me on to this printer. Can’t wait to pick one up since I already have an older printer that I’ve been meaning to upgrade from.

[@redfield312]

i have ordered this printer. I was so lucky to find your vidio, and i have to say that this was one of the best complete and informative vidios i have ever seen.WELL DONE

[@marcup1584]

Thoughts on picking either this Neptune 3 Pro or the new Ender 3 S1 Pro as the better printer? Seems that the Neptune is quite a bit cheaper with just about as good of functionality.

[@ryszardgorazda1580]

Was going for S1 too but seeing this video, now not sure :/ help please! :D

[@ImmIam09]

Thanks!

[@txmexnittro]

Wow, what an awesome video!! Thanks for making this video and thanks for sharing!!!

[@ChristopherMadrigal-j7g]

subscribed! such great post, very in depth. thanks!

[@11290slk]

Does it do a 36 point autolevel before each print or just when you select "calibration" and how long did it take for the 36 point calibration?

[@doom3637]

I bought my daughter Ziro Starry Sky filament, but we're having an issue with it building up on the nozzle as it tries to print. I purchased a 0.6 nozzle to try to remedy this. Any suggestions on what we should do differently in the settings to accommodate the wider nozzle would be greatly appreciated. Thank you!

[@salty7806]

Thank you very much for that nice video, everything works now

[@fxndiiafk]

what is the print speed on this printer?

[@blue2054]

Great video. Definately gives me confidence in the printer. Would get but they're all sold out in the US :(

[@aitdahmane]

Really great video! Thank you for sharing this

[@stephanegregoire3742]

Hello. It's seem that nobody here note this : the point zero is not in the center of the bed (is on the right and on the front). During the calibration the head begin outside the bed at right and finish 3 cm into the bed at left. It's very strange. Someone can explain me?

[@keithchicoory4830]

Regret not coming across this review before i bought my ender 3 neo. The neptune pro is dope

[@صالحالداموكي]

Do you recommend a beginner to buy it ?

[@tristanw8865]

Seems like he did mention it at the end that it would be good for beginners.

[@Pastel_vr10]

this video helped me and my dad so much i dont know what we would have done without you thank you so much have a great day

[@legendaryshadow6428]

hey, how the 3 pro for you so far, im stuck on this or the base 4 Neptune, but I dont know if I should go for that due to the issues reported with the Neptune 4 max as im worried ill have those same issues with the 4 so im thinking of maybe the 3 pro

[@Pastel_vr10]

The Neptune 3 pro is easy to setup and great quality and so far I haven’t had any issues with it I would highly recommend It’s great for experienced people and beginners

[@gamedevai]

Cool printer and quiet hope some day I get a chance to get one.

[@PokeJulyTCG]

received mine today and this video was great help! Looking forward to more of your content

[@IIIRuin]

I really want to buy the 3 pro. I've read that its not entirely suitable for ABS. Something about the standoffs and the PTFE tube in the extruder not being suitable for it. Has this been your experience?

[@fpvsmurf]

Great video! Neptune 3 pro is now in Cura 🙌🏾

[@sandracordoba6090]

I followed your instructions and everything went smoothly. But I am having an issue printing the Buddha, the first layer of filament won’t stick to the bed. I have tried different things but no improvements so far :(

[@MaximRodin-s9u]

I can't decide whether to buy this machine or the Ender 3 V3 SE. This has a light bar, a little more build volume, and a detachable magnetic touchscreen, but the V3 SE is a little faster. Do you guys in the comment section have any advise on which one to buy?

[@rcmtnet]

Thank you for the video it has helped make my decision to purchase easier. I have one question what is the name of the "ABS filament" you used to print the blue wheels? Thank you

[@JustVlads]

geni.us/x00w7

[@krilliom1289]

Anybody know why my fans are at max speed ? I try to control them but they just stay at the max speed and it is quite loud if anybody could help pls !!! I’m new to 3d printing

[@LutherBuilds]

This is going to be my second 3d printer. I currently have the Ender 3 Pro and I'm tired of fiddling with it or running out of filament and not being able to resume my prints. I know there are ads ons for it but I don't want to put anymore money into it.

[@attribute-4677]

I don’t understand fully why we run the head down before tightening fully? I accidentally bumped the head on the bottom sheet and hope it isn’t damaged :/

[@zeilstar]

My "home" is about 3mm above the bed. After auto levelling, my home is still too high and I have to decrease the Z offset every time. Do you know to adjust the home location?

[@levigabel3685]

i just got this printer, but for some reason mine is really loud when the hot end is hot, i think its the motherboard fan, because its not a fan in the extruder. any advice?

[@kostickkali956]

Спасибо

[@NiklasLundgren79]

Great video as usual. You keep it very educational 👍🏻

[@eosme]

where did you find the octopus print? also the setting you suggested in the advance and expert, is that a setting you used for all your prints?

[@benjaminli9853]

Is the z-axis motor supposed to be very hard to move? I can rotate the circles, but I have to use a lot of force to move it up/down

[@MaximRodin-s9u]

I am planning on getting an Ender 3 V3 SE, but I will buy this one instead of I get enough money.

[@REDACTED.O5-13]

can anyone help me, why cant i remove the flexible print bed, i have the exact same printer, but it wont come off

[@lawrencezhang9908]

40:08 The y wall have the layer pattern, it happen on my 3 pro as well ,do anybody know how to fix it ?thanks

[@alenbainrauch3853]

Anycubic Kobra or Elegoo Neptune3 Pro?

[@Everythingeygy]

Just about to get one and was wondering if I should spend a bit more on Neptune 3 max

[@andrewfischer6055]

I did not get these results with this printer. Like at all. I must not have good settings or something.

[@Brightshadow686]

Just purchest it yesterday. Now im really looking forward to it. Should come in 2 days ^^

[@frostyjim2633]

I just ordered one. Hurray for me!

[@arturoveliz186]

Thank you for your video, could you please help me with the measurements of the box, height, width and length, I want to know if it fits in a suitcase, thank you very much in advance, greetings from Guayaquil..!!

[@carlosneder2959]

I wish I could upload vid of mine printing the little Buddha

[@chlero_eyes]

Someone's Dad here, want to buy this for my kid, would this printer be good for wearable helmets, such as Batman, Red Hood Magneto? Or should I go for the bigger one??

[@Joh750]

I purchased a Creality Ender 3 V2. The setup was a complete disaster. Also I was never able to print with that printer. Creality support is a real joke even from Shenzen. I prepared a video on KZbin for the encounter. Now I purchased a ELGOO 3 Pro. What a huge difference. Your video was very helpful even though the manual was limited in instructions. Creality Ender took me about 15hrs to assemble. This Elgoo took me about 1 hour. Installing the last part which was the cable holder made me realize that I put the frame on backwards. No big deal. Took the 4 screws off and reset to the proper place. Initially I was very skeptical because when the box arrived, I noticed it was also from China in Shenzen. Was I in for another disaster? So far I am impressed.. I haven't printed yet but I do not forsee any problems. Enough for now and anxious to start printing. Good job on the video. BOY!!! was I wrong.....Turn power on and said booting for 2 seconds and then screen went blank. Now if I power off and on, I just get a black screen. Looks like another disaster. Even the scan disk is blank..and I do not get connection to computer. I wonder what is going on in Shenzen, China..!!

[@brezelbaker]

Really great review ... Thanks so much. I have a question. Can you measure or tell what the minimal footprint is of the machine? I would like to place it on a shelf with possibility to overhang in front. What depth is needed from the very back to the last point touching the table?

[@JustVlads]

You'll need at least 18" in depth, 20" wide & 30" tall.

[@MrBlingBlingNr1]

nice video and also nice printer

[@JSaponar]

Great video! This really helped me a lot as I felt like the instructions were confusing at times. I would recommend using the glue stick though, my test run of the buddha was great, but at about 80% done the buddha popped off and I was unable to fix it. It was a test run though, so no issues there. But I am happy to see that everything was set up nicely and works. Can't wait to explore this 3D printer more! Thank you for the video. It was very informative.

[@freebird1963]

Your videos helped me set mine up. Couple skips over but that could just be my OCD when it comes to setting things up. For the fan which was one of them when or should it be enabled. ? Thanks and really informative and not to fast setup videos. Thanks.

[@SkepTones]

Hey man I just got a Neptune 3 pro of my own, got it on a crazy deal! Followed this vid step by step and it was super helpful, and this setup was a breeze. Got the Buddha printing right now and its looking amazing so far. Coming from an ender 3 pro I had to mess with for hours to get printing right, this is next level. The N4 pro did not seem worth the extra price hike, and I've had my eye on this one since it first released :)

[@BreezyHillArt]

We were going to get the Bambulabs H1Carbon but my father in law passed away. He has 3 3d printers. His newest is this one, which we were told we could have. Actually, we were told we could have all three of them. But we don't know what the other two are. So, we are likely going to have a 3d printer soon. Which will be just fine. My mother in law is going to need someone to print her stuff for her pottery.

[@MondoMurderface]

POWERLOSS SAVING!! thank you.. holy crap that was causing me so many issues even on the benchy.

[@marcsartoretto1364]

Very useful video. I just purchased this exact printer. I'm new to 3D printing. So I really appreciate you taking the time to demonstrate and explain!

[@acalavidyaraja]

Thank you so much for this video. My Neptune 3 Pro will arrive this week and it's my first 3D printer. I feel well prepared because of this video.

[@m.s.s.662]

I don’t understand what exactly to adjust to fix the roller… my hole extruder is slanted and “hanging”. No idea how to explain it better

[@dwarrenmsp]

Of course I would see this before I commit to my first printer. I found a great price for the Sidewinder x2 from a seller in the US, but with Amazon discounts and whatnot that I have I could get this for half the price of the Sidewinder. Granted the Sidewinder is much larger and I think more flixible for my needs, this guy could also be great and easy to use. It's so new it's not even on Elegoo's site!

[@Ravnican127]

As someone who has both, go with the sidewinder. Both my Neptune and my buddy's had a lot of issues, some of which we still haven't fully addressed with his. My Sidewinder X2 on the other hand was my first printer and has been an absolute workhorse. It has easily handed any project or filament I have thrown at it, including TPU and Ninjaflex.

[@dwarrenmsp]

@@Ravnican127 This is good to know. I'm struggling with the decision because I can get the Neptune for about $160 while the X2 would be $300-350

[@ihasacavity]

@@dwarrenmsp where did you find Neptune 3 pro for $160?

[@dwarrenmsp]

@@ihasacavity I have $50 in rewards accumulated and another $10 for looking my Venmo. It all adds up.

[@drooooo1]

@@Ravnican127 What issues and with the Neptune 3 pro model?

[@DirtyPlumbus]

Probably gonna buy one.

[@austinvickymoore3656]

I'll be purchasing mine Thursday!! I can't wait for it to show up... well be my first printer!!

[@quiettime4659]

AMAZING VID I JUST GOT THIS AND IT WORKS AWESOME THANKS :)

[@urosmilanovic2878]

My X axis doing small jumps while moving no metter what i do with rollers or belt. What can be problem?

[@danieljaeger116]

How deep is the Elegoo without y-rail.. just from foot to foot???

[@project_hollow6627]

Any recommendations for printers that can print fast? 120-200mm a second instsad of 60? I noticed some printers can but they are not equipped with good fans etc.

[@jakepichugin591]

Am I the only one having problems with the Amazon links? I can't find this printer anywere on amazon.

[@KlunkersKustoms]

i decided this is the printer i want to order 3 of, but i guess its not available in the USA

[@Chris0612]

Thank you so much for the video. I wonder waht you PLA retraction settings are. Keep it up

[@devarora4969]

Can you recommend which 3d printer should I get between the ender 3 S1 or the elegoo Neptune 3 pro ?

[@demotors070161]

Thanks. Got mine yesterday. Only 2 days shipping. I'm rgoing into my shop right now to adjust the belts and rollers er your video. Then I will calibrate and do a test print. This is my first printer.

[@andwarp]

My first 3D printer. Thanks so much for the overview, I wish I could get these for every product I buy.

[@kntwing23]

can u make anything all u need is a file to print it out?

[@porthospatel1683]

great vid. my print isnt coming out right. its being all jumbled up. any suggestions?