Elegoo Neptune 4 - Overview Leveling & Print

[@Just_Print]

Buy it here: geni.us/P4EB Recommended: geni.us/JustVlads

[@clanggedin]

Manually leveling the bed as Elegoo suggests (1,2,3,4) will only cause issues. The bed should be manually leveled by doing 1,3,2,4. Alway level the diagonal corners just like tightening up a wheel on your car.

[@vooodkathetruthseeker6747]

I honestly did not know that. You're the first person I've ever seen to say that, but it makes a lot of sense. I thank you my friend.

[@alessandroabianni4199]

Thanks for this, man. This just confirmed what I had started to notice in another vid but didn't quite get.

[@flips300021]

Noted. Thanks

[@ccmzadv4879]

This statement is correct and is applicable to a host of mechanical calibrations.

[@GlennsHardWired]

Makes no difference which corner and order you level your bed

[@Biffiest]

Been printing with mine for the past couple weeks and it’s amazing. My recommendation to anyone.

[@destinywinning]

This helped me out so much, I was going crazy, trying to follow the instructions elegoo has. This video you made, made everything so much easier to understand. Thank you me dude.

[@matthewgrimwood8389]

Your an actual lifesaver! ive watched all yours videos relating to the neptune 4 and you have made the whole process of assembly and leveling so much easier to understand, thank you!

[@Liberty4Ever]

This was a great review, even though you only printed the pre-sliced test prints, you showed more of the user interface details than the other reviews. I've never used a Klipper printer so I was very interested in all of those details. Kudos to the Klipper developers. The user interface is very clean and intuitive. I want the Neptune 4 pro version (steel rails for X and Y), but plus size (300 X 300 mm print bed), with WiFi. Bonus points if Elegoo replaces the ribbon cable with a continuous flex rated 4 conductor CANbus cable. A tool drawer in the base is a nice feature, but that little tool storage test print is awesome. Good job, Elegoo.

[@ThatLostGamer]

Just got my neptune 4 Max. Its my first printer. Thanks for the help.

[@rodrigoalister9593]

Mine just arrive today. The ship print with the test filament that it has printed flawless in 22 minutes! It is my first FDM printer and I'm very impressed! I have no difficulty to install and to do the first leveling. Amazing product until now!

[@jameschambers9312]

How do you level the middle part of the bed?

[@safargris815]

A great review over all! Good information and explanations of the different functions and actions you made. I plan on order one of these soon and im pretty excited it seems like a great machine for the buck!

[@Deputydog-xk5jl]

Just got the 4 max and this was a lifesaver! Thanks sir!

[@enricobononi8655]

From the video is quite difficult to judge the print quality…is it on par with standard machines such as ender 3, prusa etc? I like the idea of a faster print but only if the quality is equal. Would also nice to have a print at the same speed of normal printer and see if the quality is better

[@alessandroabianni4199]

Dude, thanks for your channel. Your breakdown and way of explaining really helps!

[@ouchsicle]

Dude what an awesome video. Really informative and easy to follow. Much thanks for the great video!

[@richardrivera3465]

I got mine yesterday and put it together today and every time I print it slides off and ghosting. How do I solve this problem?

[@djgraffiti5627]

My Z offset never stays

[@aadarshdange8777]

does pressing on home button in axiulry goes to acctual z offset?

[@Xer0193]

I have no idea if mine is supposed to be some gen 2 of it but mine is different... Power plugs in on the back right as well as the power supply switch being in an odd spot.

[@flips300021]

There, there.

[@leus9513]

can someone explain why my nuzzle and bed are so far away from each other that turning the wheels doesnt help?

[@Stippy420]

The Neptune 4 is supposed to have 121 leveling points, not 36. That being said, the firmware is a hot mess right now, bricking printers. Please don't update unless you have to.

[@PeterAgostiniJdcap26]

Is there much difference from the pro model printer? Ty

[@juliussykes5212]

I have the 4 plus and I’m having problems setting XYZ to 0.

[@NaughtyGoatFarm]

Best instructions thankyou

[@colinreitz2646]

Kinda wondering why yours has 36 points to auto-level and mine does 121?

[@maiteflu401]

Acabo de comprar y no se donde descargarme el programa para meter en la tarjeta de memoria diferentes objetos para imprimir. Solo me sale 1 buda

[@flips300021]

Don't look inside the, Pyramids. Top Tip.

[@CodenameHawk1225]

I just got this printer! Great video!

[@ellisgl]

They got rid of the static bed. Wonder why.

[@tophatv2902]

yeah so did sovol, this makes me wonder why both companies did that

[@ellisgl]

@@tophatv2902 cheaper maybe?

[@madderall_dot_com]

@@tophatv2902 So did Creality

[@flips300021]

Like a bunk

[@pleton80]

you said the middle or section 5 was perfect what were you looking for is there suppose to be the same about of drag on the paper or what??

[@flips300021]

There really is no hope, is there.

[@tux9714]

You saved me thank you ❤

[@fakel87]

Great review! No water.

[@flips300021]

Have you died from dehydration?

[@MaximRodin-s9u]

Should I buy the Neptune 3 Pro or the Neptune 4? Any advice?

[@flips300021]

Listen to the band: The Clash.

[@MaximRodin-s9u]

@@flips300021 First of all, I already bought the 3 Pro, and second, ...?

[@jozefkanaan]

I owned one elegoo 4pro, but it has been a week and the model is still failing due to the model sticking to the head. What should I do? Is there a solution??? I tried changing the threads and leveling the surface with an A4 sheet of paper and followed all the steps to no avail. Please help me

[@curlyemmm1232]

Did you manage to fix it?

[@Doghof59]

I'm having the same issue. Don't know what to do either

[@SandraKustićUzur]

Great video. I did click something on the display and now it's loading itself for quite some time. Did I ruin my printer? 😅 Don't know what to do. I pulled off the plug and turn it on again but it is just loading the elego sign ... help 😅

[@liquidsleep]

Scary, did you get the printer back to life !?

[@flips300021]

You killed it.

[@Thadopeera]

My Prusa MK4 just arrived today! Bout to start my first ever in my life print 😩 I’m nervous. Guys pray for me 🤣

[@madderall_dot_com]

A video about some Elegoo printer would be the last place you'd find me at if my MK4 had just been delivered.

[@chunkyhippo5485]

I would get the mk4 but prusa is so damn expensive

[@alex59292]

@@chunkyhippo5485it's expensive as there staff are fairly paid

[@flips300021]

🙏 Bob, hope!

[@SlippingFlipping]

One thing I realized within the very short time I got involved with 3D printing is that we still have room for anyone to create your own 3D printer world. These printers are so basic, and at least for me I can clearly see where is left open for upgrades and cost. Anyone can build this from scratch as long as you finished high school lol. I still can't believe that no one has yet changed the course and standards for starting 3D printers. I did not know just how long FDM printers been out and how someone is able to control this slow 3D standards for profit for this long. Most of printer parts are so cheap but for anyone starting they might not know this. 3D world is a strange world. The cost to go from 60mm/sec to 150+ is only about $10 bucks, and maybe $25 for consumers.

[@omegadeepblue1407]

Actually there is a lot of people out of there that habe built their own machines and are pretty ammazing. They even give you the bill of materials so you can build yourself, the problem is that most people who want to print don't want to build

[@flips300021]

Become a Mormon

[@CuttinInIdaho]

Vlad, you are one hairy bastard lol...but dude, you have the touch of an angel. Please elaborate on friction on bed leveling. Still love you dude(as a hairy bastard)

[@madderall_dot_com]

Wow, didn't even realize that youtube cruising was a thing.

[@flips300021]

You are Friction.

[@darklordstudio]

Am I wrong or what, but to me, it seems like Elegoo went backgrounds with having the bed leveling wheels with the Neptune 4 series.

[@flips300021]

?

[@nickthedane1]

I want a plus size model

[@madderall_dot_com]

More cushion for the pushin', right my man?

[@flips300021]

That's what my ex wife said

[@climbon3157]

Awwww, missed the normal prints you usually do!

[@thatmushroomguy5904]

My neptune has 121 level points, they must have updated it

[@sondaubacvlog]

too much noise

[@flips300021]

Try living where I live.

[@ivailogeimara]

They put Klipper on it but it still recommends doing the screws bed leveling with a piece of paper? WTF? I have Ender 3 Max Neo and the paper/feeler gauge method only worked once. It didn't work the second time I needed to level the bed. For some reason all corners were exactly at 1mm (when z was set to 1mm) but when I used to addon for OctoPrrint that shows howCR-Touch sees the bed, it looked like a mountain: something like -3mm at (15 15), +0.5mm at (290 15) +2.2 mm at (290 290) so it tried to compensate wrongly and the first layer was awful. After this I started to do bed leveling only by what CR-Touch reports. I installed Klipper recently and it's even better because they have "SCREWS_TILT_ADJUST". Every manufacturer that ships their printer with Klipper should provide this method for manual bed leveling if they have a bed with screws for adjusting. And BTW after you level your bed and put the Z to 0 it should touch the bed.

[@madderall_dot_com]

Wait. Wasn't he just using the regular screen? Wouldn't all this functionality be within the actual Klipper interface in the "cloud" which he didn't show?

[@nakuspanderson]

Don't buy it. Elegoo is the bottom of the line. Issues with almost everything. Save your money and sanity.

[@monetary_episode494]

Do you own one?

[@dejedejsson]

100 mm/s is not very impressive, I thought this machine would handle 250 mm/s as standard and 500 mm/s as top speed! Elegoo sells your personal data, so be aware!

[@Gamer-kn7fi]

What kind of data do they sell?

[@madderall_dot_com]

@@Gamer-kn7fi Whether you're a fan of FDM or SLA printers. I feel so violated.

[@flips300021]

Do you actually have any?

[@madderall_dot_com]

The speeds you were printing at are no different from the top range of any average printer. I'm pretty sure that's not why people are buying these. Was really hoping to see some actually impressive speeds, but it doesn't look like this printer is capable of it because you would've demonstrated it otherwise.

[@flips300021]

Slowly, Slowly Catchy Monkey