How to Fix Cracks in Plastic Using a Hot Stapler

  Рет қаралды 636,314

Eliminator Performance

Eliminator Performance

Күн бұрын

Пікірлер: 554
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
Buy it here: amzn.to/3H4SaAo
@VampiressEsmerelda
@VampiressEsmerelda Жыл бұрын
Hello I recently wanted to get a plastic welder and was wondering if you still have that welder and is it still working?
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
@@VampiressEsmerelda yes still works, best $30 ever for fixing cracked plastic objects
@kobrien61
@kobrien61 2 ай бұрын
Yours work better than mine did I've got the same one I think your prep and patience is what paid off I was trying to weld a couple of pieces of polycarbonate roof ​@@EliminatorPerformance
@7eis
@7eis 2 жыл бұрын
Definitely beats the old drill'n'stitch zip tie mechanic method I've been doing for years.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Yea it really does, these work great. Like I said in some other comments, for the price, you really can't beat it!
@MidMo4020
@MidMo4020 2 жыл бұрын
My uncle used to do the same thing! He started with bailing twine, moved up to fencing wire. But when zip ties came out he finally won. He even tried JBWELD. The vibration from the mower made everything come loose.. not the zip ties 🇺🇸
@JohannesDavidsen-bw7ki
@JohannesDavidsen-bw7ki Жыл бұрын
I wonder if super glue tape (kind of) works on those type of stuff. I don't know about it name but it's very sticky and very strong 😄
@therealrealshocker
@therealrealshocker Жыл бұрын
Agreed 👍🏼
@rahuld_as
@rahuld_as Жыл бұрын
But those old zip ties looks like a war scars for me
@petruSarac
@petruSarac Жыл бұрын
Repairing will come back in fashion when money will get tight. I was looking for a video to fix my fridge box. Thank you!
@intothenight756d47
@intothenight756d47 6 ай бұрын
Now is the time...
@hawkeyejohnny968
@hawkeyejohnny968 9 ай бұрын
I fix my daughter’s 335 hood this week. I ended up ordering the same kit and after installing the staples I put a coat of clear JB Weld over the staples. It served two purposes by working into the joints left by the staples and also covered the sharp points.The hood had one side completely broken out and after reconnecting everything I laid a layer of fiberglass over the entire area. The bottom area of plastic where the mounting brackets attach was completely gone. I found some plastic inserts to fit into the holes of the brackets and drilled new holes through the bottom of the front grill. With the fiberglass repair kit and plastic welding kit I had fifty dollars invested.
@waynestefinashen239
@waynestefinashen239 2 жыл бұрын
John Deere and Toro should include one of these in every sale. Nice tool addition to the shop supply boss it will come in handy and pay for itself in a short period of time. Money well spent and a fine repair that our customer will be happy to see although this was the minor part of his repair. Very well presented tool review looking forward to seeing other tools you use in the shop and any that you may have made to make repairs easier.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Yes it works awesome, and like I said in other comments, this can now be a service that I offer at a cost and the tool will quickly pay for itself. Thanks for watching!
@SilvaDreams
@SilvaDreams 2 жыл бұрын
Or they should just use a better plastic that doesn't break so easily, but they are cheap so use cheap plastic.
@Puddingskin01
@Puddingskin01 Жыл бұрын
John Deere will redesign the shell so that the entire mower stops working if you attempt to repair it.
@waynestefinashen239
@waynestefinashen239 Жыл бұрын
@@Puddingskin01 Now that is a good one!
@georgelowe8583
@georgelowe8583 Жыл бұрын
I really thank you for a great demo on how to fix plastic cracks. You covered all the little details, including safety, as well as cost and reliability. Good Show!
@mnphatt
@mnphatt 8 күн бұрын
Nicely produced video bro. Kit is made in China, but super impressed with the design and what you get for the money. Some Chinese stuff isn't too bad! After watching your video, I was able to fix a plastic corner post level checker in under 5 minutes. The H50 is super easy to use and the kit came with hundreds of elements; 3 different styles of thin wire and 3 different styles of a bit thicker wire. All stainless steel - use the thinner for smaller jobs and thinner plastic. One tip is to heat up the element first by inserting the new element and holding down the trigger for 2 seconds (it heats up fast) - when the element is hot, its easier to hold in place as it tacks a bit upon contact. This works very well when you are trying to tack weld an edge. As you noted, the element heats up fast - be careful about going right thru the piece that you are welding. Also, try to holds things steady during the cooldown; don't try to extract too soon. Last pointer: if you need to cut nylon rope to length, you can use this welder!! Its super slick - just heat up an element and use that hot element to cut the rope - you seal the ends at the same time you cut so the end will have less tendency to unravel.
@Aikano9
@Aikano9 2 жыл бұрын
Very fine stainless mesh and a soldering iron with a large surface area tip does a great job too. Just cut out the right size of mesh and push it in with the soldering iron, leaves a better surface finish and is very strong, you can also use it to add filler material on the top surface before sanding it to same surface finish as the rest of the piece, maybe vapor smooth it with acetone if it’s abs or asa
@jasonchristopher2977
@jasonchristopher2977 2 жыл бұрын
Beat me by a week. Yes the screen has saved me so much time, money buying new pieces. Some u can't buy so fixing is only option.
@angrydragonslayer
@angrydragonslayer Жыл бұрын
I've used this but with an electronics rework station The ~400°c air does beautiful things
@HeartSoulLeake
@HeartSoulLeake Жыл бұрын
He definitely mentioned that he was not that concerned about the overall appearance but was more focused on showing how the soldering tool works and getting the cracks repaired.
@SerienchiIIer
@SerienchiIIer Жыл бұрын
Thanks a lot, that's a great idea! I was just about to buy yet another single-purpose tool that I use twice a year. I still have an old soldering iron that I don't use anymore and some stainless steel mesh is easy to get, so I'll definitely try your method first.
@MrTimmmers
@MrTimmmers Жыл бұрын
I do this, and melt plastic over to hide it where possible, on black plastic, melting cable ties as filler/strenthener works well.
@yogidemis8513
@yogidemis8513 2 жыл бұрын
I had a few riding lawnmowers which the plastic broke in the same spot. One thing I did was when I bought a new mower I took off the hood and fiberglassed a few strips around the inside edge, mostly on the weak points. It's been about 6 years and no cracks anywhere. This has been a great review, I was always curious about these plastic welders.
@waynestefinashen239
@waynestefinashen239 Жыл бұрын
Great idea thanks for sharing this one!
@UtahDarkHorse
@UtahDarkHorse 2 жыл бұрын
The staple tails have some indentations in them to allow you to just bend them a little and they'll snap off, but I've only had marginal success with that. I typically use a Dremel with a cutting wheel on them. Only other thing I'd mention is once you get the staple to depth, give it a very slight twist to help the staple become completely embedded under plastic. Otherwise, they could sometimes pull out. Thank you for a great video and for sharing 😊 Just for your info. I have this item plus the regular soldering iron looking plastic welding kit and have had and used them both for a couple of years (occasional use) with no issues. I tend to use the soldering iron looking one along with stainless steel screen more often than this one, but there are use cases for both.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Hey Mark, yea I was using it the other day to fix a broken plastic snowblower chute and tried what others had mentioned about snapping the ends off, they didn't snap at all lol I still had to cut them. Like you said with the soldering iron, I then used it to melt the plastic over the staples and it seemed to hold really well. The twist definitely helps keep them in there.
@johanerasmus2522
@johanerasmus2522 Жыл бұрын
I just bought one today online, and I can't wait to repair some broken plastic trimmings on my Land Rover ❤ thank you for your kind review, I do appreciate it dearly!
@mjremy2605
@mjremy2605 7 ай бұрын
Very good demo, clear visuals, great instructions, comprehensive, and NO MUSIC, WHAT JOY! Excellent. I needed this. Thank you!!! Dremel is useless for anything other than jewelry! No power. My trusty angle grinder is best. I have a 5" Bosch which is too heavy and too powerful for small jobs. I would suggest a small angle grinder, light duty with 4.5" blades or smaller. If anyone knows a good brand, please let me know. I would have done one more step - put painters tape on good side. Fill in the cracks with super glue on bad side, and sprinkle baking soda to harden. Now sand down, This will be harder.
@scaletownmodels
@scaletownmodels Жыл бұрын
I bought one of these and a soldering iron style kit for setting in metal mesh and plastic rod. I've used them for quite a few repairs now and something handy to have around. The staples are really surprisingly hard to cut. I found a pair of guitar fret, end nippers that are very sharp and flush cutting.
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
Good tip, I've heard that a few times I'll have to get a set!
@sparky7915
@sparky7915 9 ай бұрын
Excellent video! I learned a new trick! Tx.! For cutting the ends of the staples its best to use an electrician's side cutters. You can get exactly at the staple where it comes out of the plastic.
@ericklassen742
@ericklassen742 Жыл бұрын
I use paper clips to make specific shapes (circles, triangles, squares) and they're cheap. They are chrome coated and will not rust. Also, I melt the bubbled surface to both smooth the repair and to seal the element from the weather if I don't get around to paintint the seam. Great video though.
@mr.november4838
@mr.november4838 Жыл бұрын
Great idea!!!
@Rick_Cavallaro
@Rick_Cavallaro Ай бұрын
That was weird how you clearly described what you were doing, hit all the important points, and showed it very clearly on video! Subscribed! The only thing I might be tempted to add is that it's not uncommon that when you get one of these cracks, the plastic is simply becoming brittle and you'll end up chasing the problem until there's no hope. I recently went to work on an old pair of rollerblades, and the entire things literally crumbled in my hands. There's zero chance I could have even put them on. But short of that type of issue, this is a great fix.
@mr.november4838
@mr.november4838 Жыл бұрын
Just picked one up for a cracked truck mirror. Can't wait to get it all fixed up. Nice vid.
@JonnyMudMower
@JonnyMudMower Жыл бұрын
Fixed the hood on my x300 with one ,never new it existed but it sure does the trick and it’s great on car bumpers 👍🏻🍻🇨🇦
@williamwilliams7706
@williamwilliams7706 2 жыл бұрын
I have been putting off fixing my Kubota's plastic with hardware cloth and a big soldering iron, Some thing I saw a while ago on YT. I'm glad I saw this first.
@SC-qx2kj
@SC-qx2kj 2 жыл бұрын
If I am not mistakened, the tool is actually a low voltage high current transformer, more or less the same idea as a soldering gun. Other than the on-off switch and the plastic case, there is nothing to breakdown. You should expect the it to last for a very long time. Just make sure you do not over heat it by not using it continuously for a long time. My soldering gun lasted me over 30 years and keeps on working.
@RSole9999
@RSole9999 Жыл бұрын
You beat me to it. It's like a Weller soldering gun that lasts 50 years except for maybe the switch.
@karledman4625
@karledman4625 Жыл бұрын
Well organized, your preparation well done and sthe script was well written. Very nice job. Thanks for sharing.
@hunter5369
@hunter5369 2 жыл бұрын
Used to do that with a soldering iron and just cut little pieces of stainless wire , hada small hole on the tip of the tool for it, it worked great
@waynestefinashen239
@waynestefinashen239 2 жыл бұрын
We actually did the same thing with our soldering iron before, this tool and the preformed pieces way easier to use.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Yes the dentfix one has a tool like that, plastic welding combined with the hot staples would be super strong!
@bullitt7544
@bullitt7544 2 жыл бұрын
Excellent. Clean up a breeze. Results are Top Notch. The precision of an even melt sink, is an improvement from many older home remedies. The tool is cool. I have mini end cutters that will work. Great demo video. I need to fix cracked splash cowling under my Jeep.
@futube1976
@futube1976 9 ай бұрын
Thanks!
@EliminatorPerformance
@EliminatorPerformance 9 ай бұрын
Thanks for the support, we appreciate it!
@Ret_Army_Combat_Vet
@Ret_Army_Combat_Vet 3 ай бұрын
I bought mine from Harbor Freight for $ 10.00 15 years ago and it still works. I've used it on cars, computer chairs arm rest, trash cans, anything plastic. Best $20 bucks ever spent.
@rfcasey
@rfcasey Жыл бұрын
Another great video. Here is a tip. To speed up the cooling process of the plastic you can use compressed air set a low psi.
@ultimate27100
@ultimate27100 7 күн бұрын
Thanks for the vid.Got mine today, amazing tool ...smashed my battery cover for my Discovery 2 when i closed the hood after forgeting to put it back. fixed it with this tool, so don't hesitate just buy it .
@GoGreenAutos
@GoGreenAutos Жыл бұрын
Useful video as I've been thinking about buying one of these cheap Chinese hot staplers. From what I've seen, I think once you sink the staple into the plastic, you're meant to give it a little twist. This would mean the staple is buried into the plastic better and wouldn't pop out.
@raypowell4804
@raypowell4804 2 жыл бұрын
Sir this is, without doubt, the BEST channel for repair on KZbin! I will ALWAYS reference you first for all my small engine repairs!
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for watching and thanks for the kind words!
@karlschwab6437
@karlschwab6437 Жыл бұрын
Fantastic! I had no idea that this existed. Nice to know that there is another way. Many replacement parts are no longer available or crazy expensive. I repaired a crack in cars rear bumper years ago with pop rivets and the repair still is perfect today.
@donnagavin4539
@donnagavin4539 2 жыл бұрын
Excellent videos! Love your detailed explanations and directions. You have a new fan!!! Thanks to Bruce Pender for giving, you a shout out.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for the kind words Donna! When did Bruce give me the shout-out? I'll have to head over and leave him a comment. Thanks for watching!
@donnagavin4539
@donnagavin4539 2 жыл бұрын
@@EliminatorPerformance I’m not sure. I watch him a lot too so I don’t recall exactly when. If I find it I will reply.
@waynestefinashen239
@waynestefinashen239 2 жыл бұрын
Bruce does great videos and is an all around great person. I have actually called him and we talked for about an hour.
@jimboinsa
@jimboinsa Жыл бұрын
These work great. Used it on cracked refrigerator shelf brackets. Bought some flush cut dykes from harbor freight to get rid od the sharps. Really good vid!
@subliminal1284
@subliminal1284 Жыл бұрын
After sanding them down smooth you could also go over it with a coat of body filler to further help hold the staples in and make it a seamless looking repair
@kristacohen8210
@kristacohen8210 Жыл бұрын
As long as it's compatible with the plastic. Personally I wouldn't go for Bondo or the like bc the substrate is soft, and sanding down even a tight Bondo patch is gonna scuff/dull the surrounding areas and become its own issue to refinish.
@baddad5781
@baddad5781 11 ай бұрын
Another great tool demo. Very cool. Thanks again for sharing with us guy.
@drsnooz8112
@drsnooz8112 Жыл бұрын
What a great solution! That looks like thermoset plastic, which is much harder to melt and reform successfully. As others have mentioned, I would float a layer of epoxy over the top of that repair. It will cover the burrs and reinforce an obviously weak area of the hood. I've found a thin layer of epoxy to work very well to strengthen weak plastic pieces. I even pieced back together my truck's front grill after I drove over it (don't ask how).
@soccermono
@soccermono 7 күн бұрын
this was super helpful, really appreciate the clear and informative video!
@europeantinbeater
@europeantinbeater 2 жыл бұрын
I have the dent fix hot stapler, its a great tool and I've used in the body shop I work at for years! You cant go wrong if you use it alot
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Yea that's what I figured, just like an induction heating tool, not everyone will have one and if you need one for every day get a good one. I think I'll email them and see if they'll send one for review, their deluxe kit has a bunch of cool accessories by the looks of it.
@europeantinbeater
@europeantinbeater 2 жыл бұрын
@@EliminatorPerformance if you cant get them to send you one ill send you mine to demo
@nathangray8354
@nathangray8354 9 ай бұрын
Cool thanks! This is exactly what I need for my cracked mower hood!
@markscott6102
@markscott6102 2 ай бұрын
Thanks! Excellent video, very clear, concise and covered everything thing I wanted to know.
@jimharper6073
@jimharper6073 2 жыл бұрын
Love the way you explained everything... I have to fix the air plates under my '95 Lexus. The dealer took no care when removing them and reinstalling.. This looks like the answer to the broken plastic I have to work with.. Shop around.. I see this on Amazon today for $18 US. Yes I subscribed...
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for watching, and thanks for the kind words!
@fraydnot
@fraydnot 2 жыл бұрын
I use my soldering gun with paper clips as the staples. Thanks for the upload
@klausreviewscraftrestore3152
@klausreviewscraftrestore3152 Жыл бұрын
i have been using one of these for about 7 years now, they are very good. rabbit cutters cut flush andd are round like that. i actually just repaird a plastic dipper today with mine, mine also came with a smoothing tool to hook to it to cover the staples with melted plastic by rubbing it over the inserted staples so they wont come back out in the future.
@BigBankBailey
@BigBankBailey Жыл бұрын
Thanks for all your tips and information. You're very helpful and knowledgeable.
@ozzman530
@ozzman530 6 ай бұрын
Great video. I bought something like this to fix my cracked dash in my pickup. A couple things I noticed, a grinder or cutting wheel will reheat the staples, so take caution while smoothing off the tips. I also used some needle nose pliers to hold the tips while I cut them off. Pretty easy to do and avoids the mess if you let them fly all over. I also used the wavy ones perpendicular to the crack. It takes more of them but it allowed me to fuse the plastic across the crack after I stapled things. You can just stitch together like a welder would and the kit I bought came with a tip the heats up and uses filler material. I guess you could also get that same outcome with a soldering iron or a plastic welder that works like one.
@balloonnoo
@balloonnoo 2 жыл бұрын
Great video. I wish I had this gadget to repair the plastic fender's on my three wheeler back in the day. Good work.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
For $37 you can't beat it, thanks for watching!
@backdraftdragon3150
@backdraftdragon3150 5 ай бұрын
Incredibly well filmed and presented. Thanks.
@bobmcl2406
@bobmcl2406 2 жыл бұрын
Good video, well explained, well demonstrated. Looks like a tool I could use from time to time. I laughed when you pointed out that you can't pick up those clippings with a magnet.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
What a mess lol I figured that part out after they flew everywhere. Thanks for watching!
@budakota
@budakota Жыл бұрын
Your Very, Very Informative HANDS ON , On "How to Fix Cracks in Plastic Using a Hot Stapler"..Is By Far The Most BEST DIY Video...Anywhere On The Internet Today. Fantastic Review, & How To!!-..Great Work/Job!!..Many, Many Thanks For Uploading!!
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
It's unbelievable how well this little tool works, and for about $35 it's already more than paid for itself and I've been able to fix many things that would have otherwise been thrown in the garbage. Thanks for the kind words, and thanks for watching!
@krzysztofmathews738
@krzysztofmathews738 2 жыл бұрын
Very interesting! This is the first time I have seen one of these.
@Turningwrenches85
@Turningwrenches85 2 жыл бұрын
well worth tool right there to fix plastic hoods or any other parts of a mower that has plastic on it that is cracked thanks for sharing this one jake 🔧
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
This tool works awesome, thanks for watching!
@chesthairascot3743
@chesthairascot3743 Жыл бұрын
Oh that thing looks handy. I recently needed to repair the handle on a large plastic basket. My solution was to drill a bunch of small holes, then stitch it together using 20 AWG stainless steel solid wire. The repair was extremely solid but was time consuming and is rather non-subtle.
@fredhart7904
@fredhart7904 Жыл бұрын
I bought one of the welders, it fixed my broken JD hood, did a good job, Much better than having a busted hood,
@evren.builds
@evren.builds Жыл бұрын
Great tool ^^ Thanks for the demo 2:04 it would not have to be polarized even if it was DC current flowing through. The staples themselves are basically resistors which are not polarized.
@Mankan569
@Mankan569 Жыл бұрын
I have a similar one. But it also came with an accessory. As you put on. Can look like an iron roughly. With it, you level the surface so that the clamp is completely covered with plastic. And which I think enhances the repair even more. And with one, you can also use a thin metal mesh to melt into the plastic. Sometimes melt cable ties/plastic to get more material for the repair.
@lagunafishing
@lagunafishing 2 жыл бұрын
Great review and a cool tool to have for the casual repairer. 😎 One tip I would suggest is to use stapler sleeves as a depth guide so you don't melt through to the good side.
@pestalinc
@pestalinc Жыл бұрын
For the scrap pins after cutting. If you tape a small peace of the green Floral foam to the side of the end cutter it should hold/catch the wire bit so it dose not fly away. Would take some trial and error to get the size right for Visibility/Catchability.
@gadasavideos8564
@gadasavideos8564 Жыл бұрын
Bought one awhile back. Told my wife I might need it. Well today used it on the ayp snowblower plastic bottom cover.
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
Nice, they commonly crack and yes if you find the pieces you can repair them. Sadly the ones brought in are too smashed up
@safffff1000
@safffff1000 2 жыл бұрын
Take the panels off, ruff them up under neath and clean with acetone, apply fiberglass mat 2-3 sheets thickness setting on aluminum foils then pore on resin, pick up aluminum foil, flip over to epoxy side, put on stress areas and cracks, wait a about 10 min or more depending on curing, peal off aluminum foils, leaves nice smooth surface. Easy, clean no mess, fantastic strong repair, prevents future cracks. Flip panels, bondo the small cracks or not, finish how you want. The beauty of the foil is you can put on vertical and upside surfaces cleanly with no mess. Could do this with wheel off underneath.
@supazsa
@supazsa Жыл бұрын
A spiral one would be epic. Good idea! Great idea!!
@Sctronic209
@Sctronic209 2 жыл бұрын
Nice tool. I think I would reinforce both corners with carbon fiber cloth after the repair.
@Rein_Ciarfella
@Rein_Ciarfella 2 жыл бұрын
Jake, this was another one of your great videos. Getting right in there close and focused with good lighting and explanation really helps us to understand what you’re demonstrating and explaining. Thanks for your dedicated attention to detail and clear explanations. I really appreciate the way you covered every possible safety concern. I’ll definitely add this tool to my future purchase list. 👍🔧🧰
@waynestefinashen239
@waynestefinashen239 2 жыл бұрын
Right on mate, for the price you will not be disappointed. I expect this tool will get a lot of running time in Jakes small engine repair business. Very few John Deere or Toro riding mowers come in that do not have some serious hood crack issues that the customer will want repaired.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for watching!
@DjDestinyChicago
@DjDestinyChicago Жыл бұрын
Mine just showed up last night. I’m actually looking forward to using it on my bumper cover today 👍
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
I've been using it more and more lately, quite a good tool for how little it costs. When you sink the hot staple into the bumper, give it a little twist, then let off the trigger and allow it to cool. Not shown in the video but a trick I learned from others commenting, prevents the staple from backing out.
@timtaylor8557
@timtaylor8557 2 жыл бұрын
Well done! Great review. I wish there was something like this years ago.
@ralphbell1786
@ralphbell1786 Жыл бұрын
The Binford 5000
@Handygrrl
@Handygrrl Жыл бұрын
Wish I had known about this a looong time ago! You don't discuss minimum thickness of the plastic, so I guess I'll figger it out on my own. Thanks!
@rieldylanburrows6439
@rieldylanburrows6439 Жыл бұрын
Nice I need to repair my bumper and was looking at this! Awesome!
@gravelyman
@gravelyman 2 жыл бұрын
That seems to work nicely when you know how to do it as you did. Thanks for the video!
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for watching!
@stepcorngrumbleteats7683
@stepcorngrumbleteats7683 2 жыл бұрын
You can “capture” those cut-off ends by putting a built-up bead if Silicone Rubber RTV (room temp vulcanization) from common hardware store tubes applied to the BACK side of the nippers blades. That way the two sides of the rubber “pinch” the wire being cut, and stops it from a free-range exit to the floor, or, you know, your eyeball.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Something I may look into, how weird I just see this comment now and watched a video on this the other night
@BeatniksVids
@BeatniksVids Жыл бұрын
Or just lay a rag over the cutter end as you snip them so they don't fly off.
@Romeo9933
@Romeo9933 4 ай бұрын
Great video! I have the same tool and it's great on plastics (esp. motorcycle fairings). I usually follow up the staples with some clear epoxy or resin (on the backside only) to make it bulletproof and fill up all of the holes and indentations. Great stuff!
@TamNguyen-ng1kw
@TamNguyen-ng1kw Жыл бұрын
Thanks for sharing the plastic welding process.
@eugene5438
@eugene5438 2 жыл бұрын
Very cool. Looks like it's a great tool for the job.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Yes it works awesome, thanks for watching!
@bumpkinrocks
@bumpkinrocks 2 жыл бұрын
Excellent tool I'm really impressed with that, great review👌👍
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks bumpkin! It works so well that I look forward to using it in the future. I'm sure I can advertise this as a service and the tool will pay for itself.
@thebeequeeper5424
@thebeequeeper5424 Жыл бұрын
Learn something everyday if you get up, dress up, and show up! Enjoyed your technique doing the video.
@Silverhorn2
@Silverhorn2 Жыл бұрын
I came up with my own line of staples using up my scraps of .030 mig wire. They work great and are magnetic.
@markedward8639
@markedward8639 4 ай бұрын
The kit I bought on ebay is 150w, which makes it work much better. Also, it came with a spade-bit looking thing to do the smoothing out afterward. And I use a small needle-nose pliars to bend the legs back and forth, and they usually break off. I've seen people use metal window screen mesh with the spade-bit thingy, and embed that into thinner plastic for great strength.
@tonylively579
@tonylively579 Жыл бұрын
Great video thanks for breaking down the process of plastic welding. I just ordered my hot stapler and ready to get down to business.
@akun10years10
@akun10years10 2 жыл бұрын
a good and thorough demonstration. thx
@SierraSierraFoxtrot
@SierraSierraFoxtrot Жыл бұрын
I was not familiar with this technique! Very cool!
@Jreaddy
@Jreaddy Жыл бұрын
Buddy is teaching us while he learns lol, I love this stuff. The cutters the hand underneath lol.
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
1st time use, reviewing and showing it off. It's a great tool, and I learned some tips from the comments. Thanks for watching!
@DIYVariety
@DIYVariety 2 жыл бұрын
There have been a few times i could use it, been thinking about getting one. Thanks for the video. And demo
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Thanks for watching!
@Katya5cat
@Katya5cat 2 жыл бұрын
You video is very well done. I too have one of these welders. Your using it on a John Deere hood piqued my interest. That is precisely why I bought mine. I would like to point out something about trimming the staples. If you look closely you'll see a slight score mark at the base of the staple. If you remove the welder while the plastic is set but still hot you will be able to break the pins off below the surface. This is handy when following up with plastic rod and not needing to grind stubs down.
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
Awesome I'll have to try that out, thanks for watching and for the tip!
@HeartSoulLeake
@HeartSoulLeake Жыл бұрын
Thanks. We were looking for a link to the plastic soldering tool in the description and couldn't find it. Surprisingly, we found the link in the message box under you youtube ID. 😊 We followed the link, and saw that there are quite a few brands with various temperature levels from 50 to 180 and the soldering accessories. They all seem to be in the price range you mentioned, with a few others priced a bit higher.☝🏿
@hfarms5779
@hfarms5779 Жыл бұрын
Learn something everyday. Thanks.
@pn4775
@pn4775 2 жыл бұрын
very good video. excellent explanation for all aspects of the use of the tool and the finishing off of the staples
@mykbaret4772
@mykbaret4772 2 жыл бұрын
Thank you for this Very Well Done instructional video!
@blusevenforever3267
@blusevenforever3267 11 ай бұрын
Nice tip to drill a hole at the end of the crack to stop its expansion👍
@chasleask8533
@chasleask8533 7 ай бұрын
Very informative . I've got a job for this . Thanks buddy.
@antrinh5525
@antrinh5525 2 жыл бұрын
gotta have to get me one of this, thanks for the review! happy holiday!
@elbeboboys
@elbeboboys 8 ай бұрын
Good job amigo.. good teaching...well done i just bought one amazon..you are life saver to how the machine works from star to end ...and where to get more of the staples...saludos amigo from boise idaho
@JMan-The_AntiCitizen-
@JMan-The_AntiCitizen- Жыл бұрын
Thanks for the info, been curious about these staplers you confirmed what I thought about them 👍
@Anubalfer
@Anubalfer Жыл бұрын
I'm going to be honest. After watching a bunch of these videos, I decided to take my paper stapler and staple the plastic tab that broke off a truck's kick panel and then melt a zip tie along the crack and over the staples. Then I took my wood engraver and flattened the plastic out smooth. It worked great, but I would like one of these tools.
@paritee6488
@paritee6488 6 ай бұрын
Amazing job, it looks just like a new one.
@randolphsnyder1505
@randolphsnyder1505 Жыл бұрын
Great tool,have used it a few times but having trouble controlling how deep to imbed the staple and then hold it steady until it cools enough to pull the iron from the staple. Any help ? Open for suggestions
@EliminatorPerformance
@EliminatorPerformance Жыл бұрын
That's the tricky part, you ideally want to go half way, and I've learned that twisting the staple after you've gone in a bit (while it's still hot) helps secure it in place.
@randolphsnyder1505
@randolphsnyder1505 Жыл бұрын
@EliminatorPerformance I think I will try to make a few various thickness stops.might just try some small washers ,about 1/8 in thick,just something that will keep me from poking thru the plastic.A slotted hand held spacer that can be inserted between the tool nose and work piece.If I come up with something that works I will send you a picture if you send me a email addr.
@joehorecny7835
@joehorecny7835 Жыл бұрын
If you cup your other hand, and keep it over the staple end as you snip it, generally it will shoot up and bounce off your hand loose energy and stay somewhat close to the work area opposed to flying across the room. The blunt end should be what hits your cupped hand opposed to the clipped end, but you can wear a glove on that hand for extra protection. Looks like a nice tool! Or maybe using a piece of duct tape, and pick them up like dog/cat hairs like a lint brush. Nice informative video!
@joshnabours9102
@joshnabours9102 Жыл бұрын
I am curious if those metal protrusions you stick the repair staples into are live with 120v ac power when the trigger is pressed.
@Francisco_Manos
@Francisco_Manos Жыл бұрын
Very informative and helpful tips, thank you very much 👍
@georgechubbs6992
@georgechubbs6992 9 ай бұрын
How strong is the repair? I have a cracked Pelican sled (side wall) that typically carries 200-250lbs 20” firewood. Wondering if the shifting wood (laterally) as I’m hauling the load would be too much for a repair like this?
@EliminatorPerformance
@EliminatorPerformance 9 ай бұрын
It's probably stronger than it was before it cracked, I was lifting that previously broken piece with 1 hand trying to get it to flex and it seemed stiffer than before.
@benalfano4533
@benalfano4533 2 жыл бұрын
Yes those plastic hoods are also expensive to replace from a dealer too, definitely worth it nice fix. Oh and NEVER load your tractors backwards on the trailer either because the wind will rip those hoods clear off! I worked for a john deere dealership for 5 years, trust me just pull them on and back them off
@EliminatorPerformance
@EliminatorPerformance 2 жыл бұрын
I have a strap that I put over the hood when loading them backwards. Never had a hood come off yet
@richardefriend
@richardefriend 2 жыл бұрын
You improve the results if you give a slight gentle twist to the gun while pulling off the staple.
@yesimfunatparties9337
@yesimfunatparties9337 Жыл бұрын
Would filling it with epoxy resin or even gorilla glue not work better and leave less of a mess ?
@KartalKafadar
@KartalKafadar 4 ай бұрын
Hello. The plastic part at the bottom of the front bumper of my vehicle is cracked. I want to repair it myself. In some videos, I saw that hot staples were made from the front surface, but in some videos, you also made hot staples from the rear inner part of the plastic part. Which is the correct procedure? Does it need to be done from the outer surface of the part? Does it need to be done from the inner surface of the part?
Top 15 Plastic Repairing Tips and Hacks That Work Extremely Well
32:36
Creation Holic
Рет қаралды 10 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
DIY Bumper Crack Repair
4:06
speedkar99
Рет қаралды 4 МЛН
Best Plastic Welder? Weld Repair Stronger Than New? Let’s find out!
14:46
Ingenious Method! Fix All Plastic Parts Using Cable Ties
5:16
The Maker
Рет қаралды 12 МЛН
How to Easily Fix Cracks by Plastic Welding!
16:08
Paint Society
Рет қаралды 1,3 МЛН
How to Fix Cracked Bumper Cover . Amazing Results
19:20
Auto Repair Guys
Рет қаралды 3,1 МЛН
Bumper Repair with Hot Air Plastic Welder
6:57
Polyvance
Рет қаралды 5 МЛН
Amazon Plastic Welder Review
7:34
otix
Рет қаралды 71 М.
Pro Tips: Instantly Fix Your John Deere Hood Crack in Minutes!
13:21