Elite Force 1911 Mag Co2 Valve Replacement

[@davidgabriel5125]

Thank you i replaced a valve on a pt99 from cybergun after watching your video and that fixed the leak. Awesome!!!

[@hyperspeedcrab]

I live in Turkey where most Airsoft items aren't sold and instead of shipping this kit from overseas i just used a scissor and opened it ever so slightly to fit the two notches and screwed it out that way. Great video.

[@gmeast]

I like that you 'suggest', or 'hint' at the notion: ... if you DON'T have mechanical aptitude, then buy a new valve or magazine.This will save hours of needless frustration and dollar$.

[@gmeast]

Your post here is very valuable! I have found that the valve CANNOT seal in the first place. The little bitty O-ring's counterbore is too deep for the O-ring's wall thickness (cross section). Secondly, regarding the white Nylon (TM) piece: The metal poppet-to-Nylon interface seal is inherently leaky. Other CO2 valves, from other manufacturers, have O-rings at that same poppet interface. This CO2 valve design is woefully deficient in 2 areas: the little bitty O-ring/counterbore fit and the (inherently leaky) poppet-to-Nylon seal. All of this is 'fixable' through a MINOR REDESIGN ... rectangular-cross-section-gasket (first issue) and an elastomeric seat or O-ring at the poppet location (second issue).

[@legorobotics1017]

Took the back part that twist off out oiled it and now my mag is fixed thank you so much

[@MCRex1581]

Hey this video helped a lot. I was wondering what other O-ring type problems I had to figure out, but that inner O-ring was pinched so it couldn't get a good seal. Thanks again for the help. :)

[@scorp6458]

Awesome, Glad you were able to figure it out! Happy to help!

[@Andresguidolao10]

come si chiama l'accessorio del cacciavite che serve per smontare la valvola? o dove lo posso trovare, quello a minuto 1.56 in poi, grazie

[@liubcata]

I’m from Europe, where can I get this rebuild kit from?

[@SilentStorm401]

Great video. What kind of tool did you use to unscrew the valve from the magazine and what are the dimensions of the tool ?

[@joshw9982]

nice video, please do a video on the full re assembly if it comes to it please :)) also only noting from the video but don't tighten the cartridge as much as that brakes the seal a lot easier, ive found looser is far better than tighter and makes mags last 10x longer :))

[@AhabHyde]

Thanks for the video! After changing this valve, the input valve and the black gasket at the top, my mag still leaks a bit after inserting a new co2 cartridge and it stops hissing after 30 seconds... I think I should replace the valve o-ring. Is there a particular way to do it or do I just have to remove the old one with some pliers and then insert the new one?

[@jamescameron6819]

honestly the issue could be a dry O-ring in the valve seat. sometimes you just need to soak them in heavy silicone oil for a day or 2. if you use your pistol a lot, a drop of silicone oil on the tip of a C02 capsule every 3 months should keep it from drying out. preventative maintenance saves a lot of money and headaches

[@Ron_D33713]

Is that mag compatible with a .50AE Full auto desert eagle cybergun c02 magazine. Bc as soon as i load mine it just blows gas EVERYWHERE. IT HAS REALLY "P" ME OFF. I cant find any vids on it

[@Ron_D33713]

I even bought a whole new mag it still continues to blow c02 completely empty on 1st pull

[@citytech7637]

I just purchased this 1911 but right out of the box I was missing the co2 piercing screw would you know the thread size and pitch so I can buy one at local store thanks for any help

[@box1712]

buy this rebuild kit, it includes one

[@santyk8607]

Este kit podria usarse en cargadores de 1911 de la marca KWC se que tkne conpatibilidad con Cybergun

[@hiranhorta]

Muito obrigado, direto do Brasil!

[@Underground-o1g]

Pullin off eith another videoooooooooooooo!!!!!

[@sebastianmanchado290]

Please de link of the kit... Thx

[@brianrivero1865]

Fixing the mag with the repair kit is easy…but getting that fragging pin out and in is a sore thumb!

[@PresidentPrado]

i can fix this cartridge, 1911