Emax Tinyhawk Indoor / Outdoor FPV Racing Whoop Amazing Stability

[@keithhenderson5788]

Looks really smooth! Didn't think you were going to go down the slide tube in the play park but yep, you did it, you're definitely the man now! Loved it - nice one :)

[@RCEscape]

Lol!!! I almost hit the chain on the swing after all that so I had to find the sun really quick!!! 🤪🍺🍺🎄🎄

[@Georgewrigley]

Brilliant review. Loved the fights. Thanks for sharing. Just ordered this awesome quad. :)

[@TuanQAV]

no regret buying tinyhawk. satisfied. Gr8 vids mate.

[@BigAlFPV17]

What an awesome flyer!! Plan on getting mine soon. Excellent review Pete!! :)

[@RCEscape]

Yup!!! You won't be disappointed with this one!!! 👍👍👍🤪

[@thePeterpumpkin68]

I recieved mine, RTF..... man, I need to fly more as I can not control this thing at all. You guys make flying look super-easy. The camera should be adjustable too but, other than that, this thing is great!

[@kwadkrazy6078]

Part of it is the controller, I had the RTF kit and couldn't fly the thing inside to save my life. I'm now using a TX16s with the Tinyhawk S and I can zip around the house like nobody's business :D

[@Benny71]

Looks like a fun little flyer :)

[@eddiedavis346]

Going down a slide, now your showing off lol. Nice flying man 👍.

[@RCEscape]

Eddie Davis I was flying with my last battery too crossing my fingers!!! 🤞🤞😳

[@papadocquadshop2108]

I've ripped the Tinyhawk for so many hours, ran square into rock walls and the only problem I've had is a broken frame, and with marine heat shrink I can repair the broken motor supports. This is absolutely the best quad for beginners. 165.00 for everything, and you don't have to worry about breaking it. Learn out in the open, but don't lose it. Buy at least 15 batteries, and you can fly non stop, and its so much fun you will want to. I don't work for e max, I just wish I had this quad to start with, my skill level would be far ahead of what it is now, but having the Tinyhawk has moved me forward tremendously.

[@leelaor6201]

Was looking for brushless indoor, and just got one yesterday, but it won't bind to my JUMPER T8SG V2 for some reason?... I know you also use the JUMPER sometimes, do you have any ideas how to bind the Tinyhawk?... Thanks!

[@RCEscape]

Lee Laor What protocol are you using on the jumper?

[@leelaor6201]

I'm using the frsky protocol, but no bind? Thank you so much for replying!

[@BumpierDrake960]

You have a first batch Tiny Hawk. Starting with the second batch, the low voltage brown out and short flight times was fixed with a capacitor on the 3.3v pad. Also a new 6 port charger is now being included. 👍

[@RCEscape]

BumpierDrake960 What!?? 😳 Damn...got shafted again!!! Lol!!

[@RCEscape]

👍👍🎅🎄

[@Pono421]

I got mine a few days ago from Roto Riot and it has the fixes done to it.

[@TERBANGFPV]

I got the new 6 in 1 charger, but i cant find capacitor at 3,3v pad.. But it has capacitor at the backside of the vbat pad

[@BumpierDrake960]

The 3.3v pad is near the bind button next to the front board mounting screw on the underside of the quad... if it has a tiny cap bridging those pads, your good.

[@Herbflyinghigh]

RC my battery has the long cable on it so it might just be the one that was sent to you, but your right it's very good, a must have 👍😎👍

[@RCEscape]

Herb flying high Damn...got the short one again!!! Lol :) Thanks! 👍👍🍺🍺

[@mitchel1101]

@@RCEscape hmmmmmmmm.

[@bobbypruce8272]

I am thinking of buying to ready to fly version of this drone as my first fpv drone. Is it any good?

[@timrobinson9192]

Nice review and fpv flights brother, definitely threading the needle with ease now, which makes for awesome fpv video: 👍👍👍🍻

[@RCEscape]

Tim Robinson Thanks Tim!!!🍺🍺🍺🍺 It’s this quadcopter!! This thing is ridiculously stable!!!😳

[@timrobinson9192]

@@RCEscape You're correct about it's stability, but you're also too modest !!! Hope you have a good weekend mate :)

[@RCEscape]

Tim Robinson Cheers!!!🍺🍺🍺

[@gdhall5311]

Really good fpv flying Pete, man you went into some tight spaces. I would think that they could have enclosed the frame on the bottom as well to protect the receiver and have small landing gear on it.

[@RCEscape]

Thanks Greg :) 🍺🍺🎄🎄This is a great tight quarters flyer but still can fly with some freedom since it has enough power with them brushless motors. I think it is ok for the bottom to be bare since the whole idea is to have unrestricted air flowing beneath it. Just gotta land safely :)

[@uksewingmachineservice7030]

That is fast mate nice one DON 👌👌

[@RCEscape]

Uk sewing machine service Thanks mate!!!🍺🍺💴💴😁

[@propwash6880]

Thanks for the review. This seems a bit more tough than the mobula7, which I have and the frame is already shredded after a few days of flying. Do you think this one is on par with the acro performance of the Mobula?

[@RCEscape]

Prop Wash The Tiny I think has better controllability in tighter spaces and has about similar power vs 1s’ed Mobula but no comparison with the 2s’ed mobula which is a rocket 🚀!!! This also is a bit tougher to break than the mobula since the canopy is built in and the prop guards are like shock absorbers but the camera is vernerable.

[@propwash6880]

@@RCEscape Thanks for comparison. So they are two different beasts.

[@RCEscape]

Prop Wash Yes!!! They are both Damn near perfect!!!😁

[@propwash6880]

@@RCEscape Well gosh darn it, my LHS website had a sale going on right now and they have the tinyhawk as well as batteries. I got one. I think this might work for my son over the gt7 as it is 1s rather than 2s and I can tame the throttle via tx. Funny thing is though I ordered a gt7 too. OMG

[@RCEscape]

👍👍👍🤪lol!!

[@isaiahgalante]

Hey, this is awesome. I had one question though. When I fly mine in Acro and when I try to flip, it spins out of control and crashes. Any recommendations on how to fix this??

[@RCEscape]

I don't know buddy. Are you new to acro because it is all manual controls.

[@isaiahgalante]

RC Escape I’ve gotten pretty decent at it. I feel like it might be my tune as well.

[@RCEscape]

@@isaiahgalante if you are using the default tune it performs just fine.

[@pointnozzleaway]

I'm using Fatshark Dom v3's and a Furious true d v3. I cannot go 25 feet without loosing video ? I've checked everything soldered 5 times

[@RCEscape]

Does your goggles work well with other quads? If yes, then There must be something wrong with the tinys vtx.

[@pointnozzleaway]

@@RCEscape does awesome with other setups. done some research. seems the vtx on the TH are some good....some BAD

[@fpvclub7256]

Nice little flyer!

[@RCEscape]

FPV Club Thanks man!!!🍺🍺🍺

[@mosesjh8272]

awesome review! thank you for sharing!

[@veek2767]

Are there ways to improve the signal so it is not so choppy? Or is this just the Emaxs fault for being lower quality?

[@RCEscape]

kzbin.info/www/bejne/o2atiHiObM-Efq8

[@papadocquadshop2108]

It doesn't fly like a whoop. I've put 100's of batteries through the tiny hawk, supper tough. Its a bit under powered for freestyle, but not impossible. I can do a freestyle, but racing is more fun. You don't need to worry about crashing, I've hit rock walls at full speed, the camera may dislodge but Nick Burns has a video showing how to put back in place without taking it apart. A little practice and its easy. Thanks for the review Imo its the best way to get into fpv, and its made me more confident flying my 5 in.. Helps a lot getting used to goggles , and hitting gaps.

[@electroddxful]

Really nice Flyer. 👍👍👍👍👍👍

[@RCEscape]

Ray Lugo Thanks brother Ray!!!🍺🍺🍺🍺🎄🎄

[@Kriya369]

If you push tiny hole button backside of USB charger, then battery charging mode change. it is not 2 is low, 2 is high. 4 all together work as low or high volt.

[@RCEscape]

Aaah! Thanks for the correction :) 👍👍

[@NYC11435]

HAPPY NEW YEAR.👍👍✌😊😎

[@RCEscape]

Back From The Sky Thank you!!!! Happy new year to you too :) 🍺🍺🍺

[@xpane]

Question, how did you actually go about binding it to your Taranis?

[@RCEscape]

It is the same procedure as any frsky receiver. Press the bind button on the fc as shown @78:38 and power up the fc at the same time, that will put the receiver in a binding mode. Set up a D8 model on the taranis and hit the bind key. Disconnect the power sourcing the fc. Exit out on the taranis.

[@xpane]

@@RCEscape my Taranis won't bind to the tinyhawk no matter how many times I try. Also not sure if it's set up properly. Don't get a failsafe option anymore. Haven't a clue as to what all the settings are for.

[@didactylos4diddy474]

As yet I've not seen anyone actually break or damage those props. Even I failed to after landing in a bush and later on twigs. Apart from my rubbish flying the only problem I had was the relatively poor range of the FPV. I'm not sure that is entirely relevant and probably could be modded/fixed. Nice tip on the batteries :)

[@RCEscape]

didactylos4 diddy4 Yup!!! When it is advertised as an indoor flyer, they are on the money but man...it performs outside too!!! Maybe the vtx could have been placed slightly further apart from the fc and 100mW would have been nice!!!😁

[@papadocquadshop2108]

@@RCEscape someone has a video nodding the vtx, and another putting a lollipop type antenna on, it really helped in both cases, however the vtx used was small , and up to 200mw, but I think it shortens flight time considerably.

[@papadocquadshop2108]

The antenna mod is good but the vtx mod kills the battery way to quick. Also if you use a heat gun and remove the outside plastic from a lollipop it doesn't add any weight. I put heat shrink on mine once removed.

[@Hellmuthsilva]

What antennas are you using on your goggles?

[@RCEscape]

Hellmuth siova Mine came with a DYS mushroom Omni antenna and that’s what I’ve been using :)

[@RonaldBrown59]

Thats the best 1S whoop I have ever seen, except for the early failsafe issue. This could be a good beginner acro trainer. Do you think you can bind with the Jumper T12 transmitter? Great review Pete.

[@RCEscape]

Yes, I think also that this Tiny is the only stretched frame whoop and that is making it more stable and makes it a great beginner acro trainer. Yes, just set the jumper to the frsky mode and not the frsky-x mode. 🍺🍺🤪

[@RonaldBrown59]

@@RCEscape Thanks Pete. I'm really thinking about ordering, if I do I will use your link.

[@WildCaptures]

Pretty impressive for 1s 👍🏻

[@RCEscape]

Steve B You need to get this!!! They did a great job on the tune.

[@kartikgkalita]

Cool!!

[@jandomingo9806]

I see that the dvr is also bad for u. Must be the antenna itself. I have my antenna on the outside but my dvr is just like yours.

[@RCEscape]

Jan Domingo I know they claim it to be an indoor flyer but a 100 mW vtx would have been nice :) 🎄🎄🍺🍺

[@uziyah]

Is this not Quadcopter 101? ☺

[@RCEscape]

it's a clone!

[@heavyglassglass]

I managed to crack the lens at the very top of my camera by flying directly into a tree. The image still looks fine though

[@RCEscape]

I have some quads with broken lens also but looks fine on the goggles. keep flying :)

[@Revolverholic]

Great video but let's please understand the difference between "high voltage" and current or amperage. High amperage/capacity is not the same as high voltage - it's Ohms law, just sayin.

[@DRTOLLZ]

Are you on the right channel? A lot of breakup on the screen

[@RCEscape]

Adam Tolli Yup!!! It is actually pretty good FPV but the recording has a lot of breakups!

[@matelslug1]

i don't understand why people don't wanna use quads like dji spark or similar for fpv pleasure as them quads have much more capability for smoother and higher quality video transmission!!!

[@RCEscape]

matelslug1 Everybody has their own preferences :)

[@danielcausby301]

Not everyone has $1000 to drop in quad. These are great for the poor man who wants to fly fpv, like me ;)