Empire Axe 2.0 Leakage - Tech Talk

This is a new series we are doing to give you some tech tips from Rory and make you a more confident paintball player. Let us know if there is anything you would like to see covered in this series.
For more great paintball and airsoft products and accessories check out www.ansgear.com

[@raiderkid22]

just got a new axe 2.0 and this video helped great! Out of the box the solenoid was stuck open and was putting air out the barrel, did what was shown and it worked awesome! Thanks Rory

[@corysmith7496]

Great videos looking forward to many more of these. I just like seeing the guns get fixed and learning more about different guns. Keep it up guys.

[@aaroncottrill9442]

Thank you for this video is was the most helpful in fixing my marker... My axe 2.0 from ANS.gear shot for a few rounds out if the box then had same problems as demonstrated in video.

[@bpaultre]

Loved watching you work this out! Keep up the good videos.

[@JLMtime]

I'm going to buy 2nd noid & swop them out always cleaning it every 3 months but if it gets stuck with that kinda maintenance oof

[@adamcopeland7427]

you fixed my gun, thanks.

[@8strings8rounds]

Very informative. I'm almost wondering if this particular color had all passed over a particular assembly desk with a bad case of o-rings.

[@b4bluey]

Very good info there fella !! and showed properly !! >> Thank You !!

[@adamhoang4976]

I have the same leak, but cycling the solenoid didn’t fix the leak like shown in the video. I can hear the solenoid cycling which I’m assuming is moving the armature up and down but still get the huge leak after

[@597nothing]

12:59 what part number is this O-ring? I’m having issues with air leaking from the regular cover plate. Any help would be great

[@podium918]

So my gun doesn’t leak air but it always just stops shooting and it start spitting balls out . What’s going on with that. I bought the gun off your online store maybe two weeks ago. I’ve tried my best to diagnose but it happens every time after a few shots. Please advise on any pointers.

[@nicholassandoval8332]

Great video ANS gear

[@danielbecerra6916]

What grease are you using? Great video. Helped me fix my issues with my gun. Thank you

[@JLMtime]

Dow33

[@layzie602]

Super viendo keep up the great work...

[@garettparisien2405]

thank you for these videos.

[@TheMRBIGD36]

My axe 2.0 started leaking mid play, i somehow fixed it watching this video over a year ago, but im still curious what happened n my eyes dont seem to work right either, the gun only works when the eyes r off

[@ningchen1866]

My axe was leaking the same way and found was the transfer tube , O right was fine and I wiped the red thing inside , was still leaking then I pulled it and washed it with soap , and it’s fixed ! Haha hope this msg help some of you !

[@nicholassandoval8332]

Keep up with any customer service any gun doesn't matter what marker because paintball is paintball

[@mikegreen2411]

I just bought my axe 2.0 and have this issue with it straight out the box, the regulator screw is flush and the velocity is definitely in far enough.

[@ANSgearPaintball]

If you need some help with your marker or have any other questions feel free to give us a call at 805-522-8700 & we would be glad to help.

[@darkokun261]

I have leakage from the velocity hole how do I fix that

[@antoniodemarco2976]

Hey my gun is screaming air out the front and I did exactly what you did but it’s still doing it help

[@wowgodiamond]

What does it mean when you're getting a tiny leak from under the solenoid from where you were checking? Mine always begins to leak from there towards the end of my paintball day until I fix it by taking it apart and cleaning it with a que-tip.

[@andrewarmitage933]

I wish i had your skills : )

[@dustanmeaux797]

Anyone have issues with the marker not ramping at the speed its is set to? Mine has slowed down to around 8 bs its set to 10.2 bs.

[@ronaldsieuraj8581]

Have an frist edition mini when i screw in the tank the bolt goes mad moving back and forward any ideas what i could try to fix it ??

[@b4bluey]

Adjust the Trigger ?? It`s too close to the frame ??

[@aggferret5364]

On my Mini GS my plate is stuck in that spot. Can you make a video how to get it out?

[@oaf1575]

magnet, thin metal tool to pry it out, suction, sticky tape.

[@aggferret5364]

Oaf I’ll try the magnet thing

[@Bradley.borg99]

Can we get a Mac dev drone 2 maintenance video ?

[@TheBroz]

Bradley Borg No chance, ANS don’t sell Mac Dev due to a big falling out they had.

[@Bradley.borg99]

TheBroz oh really I’ve just bought one 😂😂

[@DanielRodriguez-jz1id]

What is the perfect psi for an empire axe 2.0? I have a ninja v2 pro regulator (people tell me to put it at 450psi)..

[@JLMtime]

Yes actually 450 perfect for your reg appox double operating pressure

[@glennsparks919]

-.- 11:27 Was my issue.

[@troymcgee3093]

Ppl get leaks cause they don’t know what they doing or touching some they not suppose to touch

[@jonathanschultz4770]

Where is the etha 2 leakage video?

[@rookieoftheyear3413]

They don't leak my guy

[@jonathanschultz4770]

@@rookieoftheyear3413 Exactly! I don't remember that coming up in the axe 2.0 vs Etha 2 videos.

[@rookieoftheyear3413]

@@jonathanschultz4770 for real.. after seeing how many thjngs can go wrong with the 2.0 idk how people still stand by it. Not to mention how a pain it is to maintain. Planet Eclipse all day

[@mikesheber2205]

Lesson to be learned here. Dont buy Empire guns. Buy P.E. guns.

[@oaf1575]

the guy who got the marker tampered w it clearly, cant rly blame it on empire there. PE is great but people like different styles of markers.

[@radazeonv8821]

That's when you just buy a better marker....

[@TheBroz]

Radazeon V The Axe is great, if you’re making these sorts of mistakes you’re just as likely to do it with a more expensive maker.

[@mikesheber2205]

@@TheBroz idk man. The higher end the marker the easier maintenance becomes. Thats honestly where the increased cost comes from (once you start talking 500 and up. My dsr or a 170r is just as capable as my CS2 (shout to ans for my cs2) but the cs2 is a DREAM to disassemble and maintain. Its almost totally tool less (tho the lux x is more so, tho theyve only made 2, arguably 3 good markers in the last decade. And P.E. markers just work, and work, and work. Idk shit tho. Just a consumer. Rory is a fucking expert. Kudos.

[@allMala]

hate to break it to you, but stupid people buying more expensive guns just leads to more expensive mistakes.

[@Dmorris556]

Read the manual...