To get one of these Empire Axe 2.0 Paintball Guns visit: www.ansgear.co... For more great paintball and airsoft products and accessories check out www.ansgear.com
Пікірлер: 68
@kylegladwin3281 Жыл бұрын
Fantastic breakdown and explanation. Concise and very informational all at once. Useful camera angles! Thank you
@markconners29133 жыл бұрын
Thanks Rory! Great video and breakdown of the gun. Helped me out greatly and maintenance. Was actually having a few issues and got it shooting top notch! Thanks again!
@KCRaider337 жыл бұрын
thank you ans gear for this
@Grobbiestraining4 жыл бұрын
Hi. Please make a video how to screw out the cupseal
@paulcolunga96052 жыл бұрын
Where can I purchase the reg tool?
@5.0_patino695 жыл бұрын
Okay weird issue I got!!! I have a brand new axe 2.0. I got it out of the box and it worked fine. The gun clicked when I pulled the trigger when the gun was on and eyes were off.(or on I honestly don’t know the difference) but anyway now when I turn the gun on and turn the eyes off there is no audible click and the gun doesn’t shoot at all on air. I did not mess with the gun at all internally and the trigger still works because I can go through and program it just fine. Thanks for your response !
@gilbertgrape99695 жыл бұрын
Cast4Bass Turn the screw in for your asa the thing you screw your tank in
@5.0_patino695 жыл бұрын
Gilbert Grape I’ve since returned the axe and got an exchange for another one. Idk what the issue was I just figured the gun was defective. My new 2.0 works just fine now
@gilbertgrape99695 жыл бұрын
Cast4Bass awesome now I’m having problems with mine lol these guns should be a lot more simple and durable
@5.0_patino695 жыл бұрын
Gilbert Grape yeah... the durability is a definite let down... I would literally recommend the etha 2 over the axe 2.0 off of persona experience
@stephenlawrence2522 жыл бұрын
Thanks Rory lots of great information 👍
@marcusgonewild3 жыл бұрын
So I just purchased this gun.. I am wondering how do I test my pressure and velocity? Is there a way to test how many fps it is shooting?
@marcusgonewild3 жыл бұрын
Answer to my question. Chrono or however it's spelled lol
@KCRaider337 жыл бұрын
can the price fall down within years range
@miked21914 жыл бұрын
I just bought a used empire axe 2.0 and I was just messing around with it for a bit and I took out the bolt and the spring seems so be stuck in the gun and I know it’s supposed to come out with the bolt. It works perfectly fine even if the spring is stuck in there but I want to take it out sometime for cleaning purposes. What do I do? Please help.
@Warcorrreia4 жыл бұрын
Was happening with mine, brand new out of the box - seems like the spring was on backwards! Really weird. switched it around and it pops out with the bolt now.
@bookie81144 жыл бұрын
Could you put a mini gs reg on this so you have a pressure gauge?
@The12footdong4 жыл бұрын
i have both and would say yes....i have not tried but looking at it i see no reason it wouldnt
@SORBETVM4 жыл бұрын
30 minutes later and he's finally taking the bolt out maybe i'm watching the wrong video
@TheMooreArte2 жыл бұрын
As a veteran I cant express how amazing all the work you do on these videos is, I wish you had been around when i bought my first gun "impulse" no it wasn't a impulse purchase it was an absolute piece of shit called an impulse :D man wish I had your break down videos then!
@rexjames81003 жыл бұрын
Good stuff
@austinjavins83626 жыл бұрын
My board screw backed itself out during the second time I ever used the gun and there’s now just a empty hole there, I don’t know how to get one to replace it. Until I do get one I’ve just been playing without it is there anything that could go wrong until I do get that screw back?
@ANSgearPaintball6 жыл бұрын
You'll definitely wanna get a replacement screw in there eventually, but you can use it temporarily without the screw while you wait to get a new one. Here's a link to the screw you need: www.ansgear.com/Empire_Axe_Screw_BH_6_32_x_250_17567_p/empireaxepart17567.htm
@kentrb57 жыл бұрын
What is the name of the tool you used to unscrew the regulator cap?
@ANSgearPaintball7 жыл бұрын
are you talking about the tool he grabs at 12 minutes in?
@kentrb57 жыл бұрын
Yes
@ANSgearPaintball7 жыл бұрын
It's an Empire core removal tool. Unfortunately it's not a tool that they sell to the general public, they just make them for repair/service companies like us. However, a thin-walled 1/2 inch socket can be used to remove the core. It has to have thin walls though to get down around the core.
@kentrb57 жыл бұрын
ANSgearPaintball ok thanks
@ANSgearPaintball7 жыл бұрын
you're welcome
@dyllanhunt78074 жыл бұрын
I have the same exact paint marker as in the video, but my problem is that whenever I release my trigger it'll fire. So it'll double fire. How would I go about to fix that?
@rbeezy-4 жыл бұрын
I believe this is a firing mode setting. Try resetting your board to factory
@ImNHTV3 жыл бұрын
Dude I’m having the same issue. I haven’t went back to my field but I adjusted the screws on the trigger. Hoping that fixes it. Your trigger may have been too sensitive
@rubydog256 жыл бұрын
My solenoid isnt firing on my axe pro. The redline indicator shows that the trigger is being pulled, even when my trigger is in fact not. ASA and redline work, but is this a software or hardware related issue? How can I fix this?
@ANSgearPaintball6 жыл бұрын
sounds like you need to adjust the trigger. it could be set so far back that it's activating the micro switch even in the resting position.
@bentley82057 жыл бұрын
Is it Normal for the Bolt spring to get stuck inside and not come out with the actual bolt it's self?
@ANSgearPaintball7 жыл бұрын
It shouldn't. Did you make sure to put the spring on in the right direction so it snaps on?
@bentley82057 жыл бұрын
Yeah! The spring was snapped to that housing that comes off of the bolt... I had to take a long object and push it out from the barrel side
@jamestrevino31246 жыл бұрын
Yeah. Happened to me too. I did the same thing
@nibbiebrownie66116 жыл бұрын
Having a leak by the bolt, whenever I turn the velocity up the velocity will go down, when I turn it down the velocity will go up and then drop down again, tech guy at my local field said it may be the valve. If I turn the bolt too far it will leak constant air. Any ideas what it could be?
@ANSgearPaintball6 жыл бұрын
maybe the cup seal or solenoid
@nibbiebrownie66116 жыл бұрын
Thanks!
@rubydog256 жыл бұрын
When you adjust the velocity (in a certain direction, either clockwise or counter-clockwise) on the bolt, the plate extends outward. After a certain point, the plate extends so far out that the rubber o rings dont make good contact with the inside of the gun, and the pressurized bolt leaks air. Try adjusting the velocity so that the plate receeds back into the bolt, and you wont have that problem.
@jamesarthur7857 жыл бұрын
it's leaking by the on off switch for air to the gun
@ANSgearPaintball7 жыл бұрын
We don't have enough information to narrow it down for you. Could you find us on Facebook and message a picture pointing to the leak or maybe a video of it?
@williamshaw10395 жыл бұрын
Hi, did you ever find a solution, as I’m experiencing the same problem?
@jamesarthur7857 жыл бұрын
there is a leak coming from the regulator on my axe 2.0 when I attach the tank. what could be wrong?
@williamshaw10395 жыл бұрын
james arthur Hi, did you ever find a solution, as I’m experiencing the same problem?
@steph2k1994 жыл бұрын
William Shaw did you ever figure it out , same problem
@troymcgee30934 жыл бұрын
Might be a bad o ring
@pokipster93047 жыл бұрын
Is the bondus allen keys set in metric or inch? I want to make sure i buy the right kit thanks.
@ANSgearPaintball7 жыл бұрын
You would want a standard or SAE allen key set for the Empire Axe 2.0 marker.
@pokipster93047 жыл бұрын
ANSgearPaintball thanks alot
@MiguelHernandez-ev7wd7 жыл бұрын
Where can I find and how do I set up the tournament lock to be on or off.
@ANSgearPaintball7 жыл бұрын
www.paintballsolutions.com/pdf/AXE_2.0_MANUAL_ENG.pdf look at the end of page 5 . it shows how to change the tournament lock.
@MiguelHernandez-ev7wd7 жыл бұрын
ANSgearPaintball Got it! Thanks for the feedback.
@ANSgearPaintball7 жыл бұрын
you're welcome
@heyhaveagoodday23975 жыл бұрын
when i screw in my tank i get a major air leak out of my barrel? any help or should i use my warranty?
@ANSgearPaintball5 жыл бұрын
I would seek assistance from an Empire warranty center or Empire Direct. www.empirepaintball.com/contact-us/
@niiick72155 жыл бұрын
heyhaveagoodday I’m having the same problem what did u do to fix it
@gilbertgrape99695 жыл бұрын
Nick Remund I had the same problem and I just put some paint in it and shot it a few times and it stopped
@thenewwayforwardorganizati38835 жыл бұрын
Check your poppet seal
@tylerg61034 жыл бұрын
26:50
@fullmetaldillon7 жыл бұрын
When I switch the air on on the regulator air starts leaking out of the gun like crazy down the barrel , tech at the pro shop said it is the solenoid what do you think ?
@ANSgearPaintball7 жыл бұрын
possibly, depends on what gun it is.
@fullmetaldillon7 жыл бұрын
ANSgearPaintball it's the axe 2.0
@ANSgearPaintball7 жыл бұрын
In that case, the solenoid could be the issue. If it isn't, another problem could be the cup seal.
@timothymoore82 жыл бұрын
Hands down you are the fucking man, ima vet whos gettin back into the sport and ive watched 20 of these breakdowns and reviews on different markers and its a credit to you when i say. Planet Eclipse and the 170R is my choice for simplicity, reliability, and value. Oh and after this review the complexity of this markers an absolute turn off.