ENDLESS BLADING 2023/2024 PRODUCTS - First Look

▶︎ Support this channel and become a Patron today, right here:
bit.ly/PatreonRicardoLino
ENDLESS BLADING 2023/2024 PRODUCTS - First Look
my Instagram: / ricardolino​
my DISCORD: / discord
my Tik Tok: / ricardo.lino​
my twitter: / ricardolino
my facebook: / ricardo.lino
#wheeladdict #ricardolino #becauseitsfun

[@nicholasswan]

🙌 thank you for the kind words! I hope you like them! Let’s get another trip going 2024.

[@RicardoLino]

lets make it happen babe ❤️

[@DeezSkates]

That bronze Swan frame is such a beauty.

[@endlessblading]

Hey Lino! Looking forward to seeing you test these new products. For the Swan frame the wheel order is 90-84-84-90. I can confirm that our current run of black 84 mm wheels will have the same updated graphics as the 90 mm wheels you received. It looks like we didn’t have them in stock yet when we shipped the package to you. The urethane specs are identical. Nothing with the wheel has changed other than the graphics. Have fun!!

[@matthaffner6848]

Love everything Endless is doing. The attention to detail in performance, customizability, appearance, marketing, and packaging is fantastic. Just got my first UFS boot and was looking at the Endless 80 setup guide after watching this video. Would be interesting to try to create somewhat of a banana rocker by either going 4x76 with black down on the middle two wheels and up on the outer wheels or maybe 80 with the middle 2 wheels and 76 down (or up?) on the ends. Might have to give it a shot once winter goes away. I definitely agree with Ricardo - I'm not a fan of dealing with rockerable axles. The customization is nice, but it's more of a hassle. That being said the ones on my Arc CS are very sturdy - no worries of lack of sturdiness or durability (Can be a pain to line up the inner bearing part though). One of the rockerable axles on my FR frames stripped at the screw divet after a few rotations and I had to drill it out lol.

[@afusake]

endless 80 looks like sola flat 80mm frame

[@RicardoLino]

somehow it does a bit...but engless kept the same design they also did on the 90s....and they somehow have the different rockering options + slider..while sola is plain and simple..flat no slider.... i like the lok of both ..until now :)

[@UYYProductions]

yESS Ricardo! Thank you for placing the yellow wheel inside the swan frame, I'm ordering that combo right now and I was having doubts, but im convinced now! Thank yoouuu!!!

[@Redbluer]

Will Endless release a trinity version of the Swan frame and trinity frame locks?

[@Juiceboxdan72]

I'm fairly new to Endless frames, but man do I love them. What a great time to be a wheel addict ;)

[@TerraRyze07]

Here are some suggestions for you to try ! The 1st frame (purple) looks like it's made for the RB Blank Pigeon eheh ! And the 2nd are for the IQON AG 10 XD ! Would love to see those setups !

[@lilchizzy9783]

Can't wait to see the UFS 80's poweblade testing! Also, I'm wondering how the wheel wear is gonna be on the 84/90 swan frames. I have highly irregular wear patterns due to preferred slides, etc. and I feel like I need all 8 wheel positions to rotate my wheels for uniform wear. Maybe if i got those frames I'd have to rotate like every skate session🥴?

[@RicardoLino]

i should be abble to test them this next week coming.i hope

[@Rollerbalder]

That ultra violet colorway is so nice. Wonder if it will be coming to the 90s?

[@endlessblading]

If there’s enough interest then we can certainly make it happen.

[@ericbernardi8116]

Carlos Bernal Sway 😁

[@TheQuintus85]

Should boot and frame not be offered as a in one product to lower the ride further most solid connection. Bottom boot frame attached all the way through now we have these high priced carbon boots with 10mm sticking out so it can take bolts.

[@Matias-rn9ff]

Looking dope!

[@RicardoLino]

agreed

[@nigelbrown2274]

2 front wheels 84mm + 2 rear wheels are 90mm. This is the same as what Adapt have been doing for years - i really like this setup

[@RicardoLino]

i was wrong..its 2x84 in the middle :) looks soooo dope

[@MendyAnkri]

Hey ricardo, thanks for all the videos you make! Question: how much can you tell the difference between a endless frame and a regular one. I never tested them and i wonder if it's worth the 200$ just for a frame.. i have been skating for about 10 years and i'v never realized the difference between two stock frames, as long there were good quality (like rollerblades, which i'm using now..) I'll bee happy to read anyone's answers, not just the King Ricardo :))

[@aaronwilliamh9905]

When is the Swan review coming out bro?

[@zac8294]

I wish they could make 76mm version

[@endlessblading]

Can you clarify what you mean? The Endless 80 UFS frame has a 4x76 mm configuration.

[@TheMadHatter1330]

Both look awesome, especially the UFS frames. I'm worried that all these little adapters will cause noise. Recently tested the Powerslide Combat Rocker frames that come with repositionable axles, i did not like the ride feel at all, sounded like they were playing jingle bells 😂.

[@endlessblading]

I’m happy to report that there is no noise with our 2-piece axles and frames. The parts are dimensioned and toleranced such that once the screw is tightened snug everything is solid. The beauty of a 2-piece axle system is that you will never strip threads in the frame because there are no threads in the frame. If the axle gets damaged or stripped you can simply drill it out and replace it.

[@mwrayknee]

Some of the Combat frames got the wrong spec spacers. If you use a ~10.37mm internal spacer, should be solid, no noise. Or ask Powerslide and they'll maybe send you the newer outer "spacers" (the hexagons), which will have the bearing bosses be slightly longer (so you can use a standard 10mm internal spacer).

[@matthaffner6848]

I have tried 2 rockerable frames. The Endless Axels were waaaay more solid than the ones on my FRs. No issues with fit either.

[@mwrayknee]

Are there really going to be no more AEND Undercover wheels? :'( Should I be stockpiling up on wheels out from that last batch?

[@RicardoLino]

i dont know..i see more an dmore italy made wheels... and less usa made....not sure what their paln is by now..but it seem slike its going that way..

[@jordskates]

They both look amazing, I really want to try some Endless frames. I'm just trying to decide between the UFS 90's (which I'd use on some USD Sways/FR UFR) or the Trinity 90 LR (which I'd use on some HC Evos/Powerslide Next). I'm leaning more towards the trinity ones as I'd like to skate them on a carbon boot but the UFS frames do look more solid with the middle support bridge

[@afusake]

get the trinity one, Evos are much better boot for 90mm wheel setup