Energetic Armament NYX MOD2

[@striker5570]

Not that anyone cares but just to be a little more precise, FEA (Finite Element Analysis) will show where and how a part experiences stress under a given load/ pressure. "Parametric optimization" is really what this suppressor went through with the given stess parameters from FEA.

[@johnlee703]

That is awesome. The long configuration sounds really quiet. I am impressed. Best ones on the Silencer market overall.

[@jeremymetcalf2502]

A suppressed 22 is def the signature hollywood James Bond style of sound.

[@SigmaBallistics]

Wow is that a satisfying sound at 18:10. Hollywood quiet 😎

[@badcatbigbat]

That is so awesome! Thanks for the info and test.

[@TrailBum]

From the side, I couldn't tell the difference between the short and long configurations. But from downrange, wow, what a difference! The long config is super-quiet!

[@Blockhead369]

I see this company is slowly becoming the top can company out.

[@randomkai1870]

Sweet vid man

[@TheRollingTrip]

Videos like this is why we can’t just have one 22 can.......

[@Xtorin_Housecat_Ohern]

...IDK, i watch these videos to learn in hope that when i finally do get around to buying a .22 can i can get the best there is and not have to buy another

[@TheRollingTrip]

Xtorin O'hern that’s all well and good, but you’ll find yourself with more hosts, than cans........there the problem presents itself. Although I’ll give one word of advice, don’t go aluminum baffles on a 22 can. Spend the extra money on SS or better.

[@internetname9102]

Competition pushes innovation.

[@gmodiscool14]

@@TheRollingTrip why u jumpscare me

[@tailgunner974]

Dear nfa, can you make a review of that tiny suppressor mounted on that small sig sauer on your wall?

[@SifuTimBerkemeier]

Would you be able to just put a wipe under the cap? I ended up buying one of these after watching your video; Going on 8 months now for the wait To help the time pass I just come back here and rewatch the video

[@vizanonn1728]

You could put that in am ultrasonic bath. Cavitations will not effect it as much as taking any kind of brush, or solvent to it would.

[@vizanonn1728]

I'd personally just soak it in methanol followed by ether.

[@JoeyBaby47]

That 10/22 bolt is super loud.

[@nfareview]

Right! And man that Beretta 21A is LOUD AF unsuppressed! I laugh when people tell me a suppressor is a waste on a 22.

[@JonesingUSAF]

Please do this can on a bolt gun and shooting sub-sonics!!!!

[@bradtidball]

He was shooting subsonics the whole video

[@demitrisolvinski]

I would also like to see this can on a bolt gun, please!

[@Skyboy_817]

​@@bradtidball,it literally says standard velocity in the descriptions

[@bradtidball]

@@Skyboy_817 Standard velocity .22 is subsonic.

[@HarryANuis-vc1hv]

Would like to see it with Kel-Tec CMR & PMR

[@mattmiller4241]

How does the energetic arms nyx mod 2 compare to the dead air mask hd? Which one us quieter?

[@h-disconnected6612]

I could never afford one let alone legally own one, but its really fucking crazy seeing how far this stuff has advanced

[@armenchuck]

Why can't you legally own one?

[@ryleynoyes]

Wouldnt shielded baffles be better?

[@justinwbohner]

You need more hard surfaces to reflect the sound so we can hear the echo. The peak sound isn't caught by these microphones.

[@ayarzeev8237]

It metered less at the ear in the short configuration? Even if it's the same that seems a little weird. Though I guess with the long barrel and subsonic ammo it could make sense.

[@ryleynoyes]

Could also be some bolt noise. Longer configuration could have higher back pressure and make the bolt louder. Just q guess though

[@1804unclesam]

Good stuff!! Can you do a redo of the original osprey 45 can? I’m seriously considering getting on the list for it but can’t find any recent reviews on it.

[@nfareview]

There are better cans out right now if you're in the market for a 45acp suppressor. I'm actually headed out the door to test the new CGS Group Nautilus 45. Stay tuned!

[@juanthelawnmowerthief1641]

Also was the 16 inch rifle a bolt gun or semi? I ask because I'm seriously considering this can.

[@juanthelawnmowerthief1641]

@NinjaRider777R I was referring to the rifle used by the independent testing lab that did the sound metering.

[@nfareview]

Great question. 10/22 was used in testing

[@LonestarROB]

What is the scope that's on the 22 takedown?

[@mikem761]

Where in Texas are they sold

[@nfareview]

mikem761 have your dealer contact Allen Arms.

[@LukeFoley21]

What company is making the carbon fiber tube 22 can?

[@user-td1zo3tv9p]

IIRC he mentioned that the manufacturer of the can being reviewed is considering making the outer tube from carbon fiber.

[@nfareview]

CGS Group Siren 22, Coming soon.

[@juanthelawnmowerthief1641]

Why would you have to send them the can to swap out the end cap? I mean there are several cans out there that have swappable end caps for swapping calibers. How is this different?

[@nfareview]

Because they would have to design a "blast deflector" device for their endcap so the ATF wouldn't classify it as a "suppressor part". This is why you see these QD blast deflector things from Dead Air, Rugged, Silencerco, etc. They had to have these products publicly available to accept endcap's to prove to the ATF that the interchangeable caps on the suppressor line is not solely a suppressor part. Clever on their end, but stupid we had to deal with any unconstitutional paperwork.

[@juanthelawnmowerthief1641]

@@nfareview Ah now it all makes sense, thanks for the clarification! It's a good thing you dont have to actually buy a "blast deflector" to own a different end cap, that cost the same as another stamp.

[@nfareview]

Juanthelawnmowerthief yeah that would suck. They just have to show they make it. It’s funny, most of the companies I’ve worked with never even planned on actually selling the blast deflector. They just did it because they had to and one day they decided to test the waters and they sold a ton of them, the other companies then followed suit, go figure lol

[@stevinoname]

That's movie quiet!!

[@christiantoth4537]

Dumb question can you use the front half independently from the rest

[@machinesandthings7121]

If im understanding your question correctly the answer would be No. That would be creating a "new" supressor. The serialized part needs to be mounted to the firearm when firing. Which in this case is the back half. Some manufacturers put there serial numbers on the threaded barrel cap, so any part forword could be used, or not used. What the ATF doesn't want you to do is to use 1 supressor broken in half on two different guns simultaneously.

[@michaelj603]

Anyone able to recommend a way to only have to buy one suppressor for my handguns 45 acp to 22 lr? I hear that just shooting 22 lr is still on the louder side when shot through a 45 acp suppressor because the larger diameter allowed gasses to escape. Is there a suppressor with multiple end caps both 22 and 45 and will that work well or still no where near a dedicated 22 can. I know it will be a larger heavier can then a dedicated 22 and it will have to be able to disassemble to clean dirty 22 ammo. Any recommendations appreciated.

[@fomocore]

Do you know of a company that can make custom replacement baffles. I have a gemtech Alpine that is heavily used and I do not want the mono core set up as a replacement. It's a good design and an okay can. Some titanium replacement baffles would be awesome or even anodized thank you

[@pugger01]

fomocore Curtis suppressors in Ohio

[@Turbo.M777]

Stalking Rhino

[@ATypicalJake1]

I love mine, but it didn’t come with the takedown tool.

[@machinesandthings7121]

Contact the company!

[@waltersmichael8915]

Did you have to change anything in your 10/22 to get it to run the standard velocity cci's? I just got a takedown and it will NOT run them at all.

[@pugger01]

Mike W contact Ruger. Should cycle all 22’s.

[@user-td1zo3tv9p]

Agreed. Contact Ruger and ask them for suggestions. My 10/22 can reliably cycle with just about EVERY brand and type of .22LR ammo I've tried short of Subsonic rounds. And even they will start to extract/eject but the case returns to the chamber. I say just about every type of LR ammo because I honestly cannot remember ANY brand not functioning properly for me. Perhaps if you thoroughly clean your action and apply a VERY THIN layer of QUALITY lubricating grease to the recoil spring/rods it will smooth up. Another thing is if the gun is still pretty new it may just need to be broken in and the reciprocating parts smoothed up with repeated use.

[@pedroceferinoalejo6789]

👌👌👌👍👍👍

[@acatnamedscoop7718]

....................................................._____________________ did I miss the contest ? aaaw crap ! I did miss the contest

[@High_Desert_Tanner]

Why no shielded stack though? Nicely made, and made of great materials... But a 10 year outdated design?

[@brandonpharis3510]

Tanner, sorry I'm really just getting into suppressors. Can you explain the "shielded stack" your referring to? Thanks

[@vitordonizetegarofalo550]

👏🔫☠️😎👍

[@thekiminthenorth28]

I cant understand why you would lower the sound of the video, I cant even hear you cocking the gun. it just makes it all unrealistic.

[@nfareview]

I don't edit my sounds. The sound is low because the powered microphone is set low to capture the tone of the gunshot. If it were set to the max the mic would peak out and it would sound like crap and not tell the story. #themoreyouknow If you attended Suppressed Fest 2018 then you would have heard this suppressor in person. Thats what it sounds like....

[@KingDeadMan]

Don't mess with the quiet kid. Lest he brings out that long suppressor.

[@axgreenious9400]

Can any level Patreon supporter have a chance to win a can?

[@axgreenious9400]

Also, love your channel.

[@nfareview]

Ax Greenious Any tier level is entered but Gold also gets the gift cards.

[@jonathanwilliams4348]

Cool video; sweet suppressor! But, "pop their cherry"? Cringe! Think I would've edited that out, and gone with "first time"; just a thought, and I mean that constructively as I love the channel. I know no harm was meant, my friend, it's just that we have gun hating billionaires and their p.r. machines taking apart everything we do and say; trying to make us look badly. It's not fair and totally fascist and un-American but that's the enemy we face and we must be on guard against them. Please understand I mean only the best for you and the awesome content of this channel, God bless!

[@tomwilson1155]

Jonathan Williams shhhh

[@tomwilson1155]

Jonathan Williams or actually shut up. There is no god bitch.

[@user-td1zo3tv9p]

Or how about we quit bowing down to the leftist elite, tell them to go pound sand so we can live OUR lives the way WE want to as long as we aren't physically harming anyone else?!? SCREW BEING PC TO PROTECT SNOWFLAKES OR THEIR PRECIOUS EARS!! It's just too bad their lousy Parental Examples FAILED them by NOT teaching them the REALITIES of life!! DON'T END UP LIKE THEM! (Although, based on your comment I fear you are standing on the precipice and leaning towards the Dark Side anyway.) If people come here just to find ammunition (no pun intended) to piss and moan about or to silence our voices, then maybe we NEED to go on the offensive and take it BACK TO THEM! If we keep acquiescing to them, they will keep on pushing us around. It's their Bully Pulpit mentality. In closing, STOP acting like food and maybe the Jackals will quit seeing you as food. (Roughly translated...Don't act like a Bitch and you won't be Bitch Slapped!) Just sayin'. You can now consider ME to be YOUR Life Coach. In order to repay me, feel free to drop a hunk of cashola to this SPLENDID channels Patreon link in my name so I stand a chance of winning one of these FINE examples of suppressors, umkay? Overnout

[@anieba]

that webbing looks unnecessary