Energetic Armament LUX - They Did It Again!

[@nfareview]

ATTN: KZbin IS SHUTTING DOWN ALL GUN CHANNELS! I have moved over to Rumble. Others are leaving KZbin in droves as well. All my NEW content is being posted on Rumble and all my old content is being sync'd by Rumble and stored on their servers for preservation. My channel is easy to find, just search for "NFA Review" in the search bar and you can find me and subscribe! KZbin has given me 2 strikes so far on videos that weren't out during their new policy change. In addition they are deleting 5-6 videos of mine a week! They are doing the same to other Gun Channels and even the manufacturers that have channels. It's time we take our viewership over to Rumble! No more scrolling and watching non gun related content while we are logged in, no more fresh content, no more support. They don't want us here and Rumble has extended open arms to us and other free thinkers who aren't afraid to call BS on how far society has fallen! I've run this channel professionally for 12+ years, logged 60+ Million views, 10+ years of public shooting events, and hopefully provided insight and detailed information to our community helping everyone make informed decisions on hard to purchase items. I TRULY and whole-heartedly appreciate all of you. It's surreal that all my blood, sweat, and tears are about to be "digitally book burned" by KZbin but Rumble has cast a lifeline to free speech and the rights of everyone to learn about firearms and suppressor ownership! To my awesome Patreon Members and my subscribers here, thank you! We are beginning a new chapter, ushering in a new fight and WILL NOT GO QUIETLY INTO THAT GOOD NIGHT. See ya on Rumble! - Adam

[@cory6667]

Later KZbin. I'll see ya on rumble

[@ColdPizzaKilla]

Damn! My Vox just cleared... Now I NEED this one..

[@hansohnbrothersllc1311]

EA did a great job with this one! We do have a few left in stock and ready to ship to your dealer, free shipping as always. :)

[@AP2020_Outdoors]

Great video Adam @NFA Review Channel. I'll be testing the Lux soon at 600+ yards in my Mauser 98 260AI! ~ Nito. ☆☆☆☆☆

[@mattbiek]

Finally #1

[@angelberrios7843]

Sold!! Can’t wait to purchase one!!

[@nfareview]

Nice!

[@chazt4863]

Thanks for a very informative review....best suppressor video I've seen on KZbin! Unfortunately, Silencer Shop doesn't carry this brand :( This certainly hit the mark for precision rifle shooters. Would be interesting to see three shot groups on paper at one of your next range segments.

[@nfareview]

Thank you! Give Gun Trader Den a call tomorrow! They can ship to your FFL/SOT 🍻

[@energeticarmament]

We have an amazing network of dealers that sell our silencers including Gun Trader Den and many others. You can still use a Silencer Shop kiosk and trust for these even if you don't buy the silencer through SS.

[@chazt4863]

@@energeticarmament Yes, it's a small world! Looked up Gun Trader Den.....they're only 40 minutes away! You bet I'll be calling them tomorrow...didn't see the EA Lux in stock on the website. Appreciate the tip! Thanks

[@stuffofstuff3]

Will you be doing a review on their new ARX can? It looks super amazing and id love to learn more on it and hear it with your setup!

[@nfareview]

I would love to but haven't heard from EA.

[@stuffofstuff3]

@@nfareview Well hopefully theyll get back to you soon then

[@vincentaguilera4820]

I LOVE my Vox S!

[@energeticarmament]

Thank you!

[@damagedgoods62]

I really dig my VOX-S so now I'll be looking at the LUX for my bolt gun purchase! Thanks for this informative review. 🧨🗽**🇺🇸**🗽🧨

[@fubar1217]

Of course they finally release the Lux right after I start the paperwork on a YHM Turbo K and have other expenses this month!

[@energeticarmament]

Totally different cans so you are good to go to have both. You're welcome ;)

[@fubar1217]

@@energeticarmament I should have mentioned, I started the paperwork on the Turbo K after the stamp on my Vox S came in. Currently running the Vox S with the Keymo mount but I also have the Area 419 Hellfire adapter for it so when the Turbo K finally comes in, I'll move the Keymo to that and keep the Hellfire adapter on the Vox S.....that is....until I get a Lux. ;)

[@antongjelaj37]

I want one soo bad hopefully they will be at your next shoot

[@energeticarmament]

We look forward to getting back to normal life and being able to go to shoots and demo events. Hope to see you at one soon and let you try the Lux first hand.

[@rsquared9703]

For POI shift, a paper target would show us the results better. I print a 1” circle for my targets on a budget.

[@karenorticio9235]

the intro : tic bang tic bang tic bang

[@Clemonsds]

You can also tune handloaded ammo to the barrel.

[@GldenRetriever]

Nice. If the muzzle brake gets stuck in the can for some reason, is there any way to get it out? I didn't see any wrench flats on the brake.

[@nfareview]

The brake is secured crazy tight to the host. It took me a lot of force to set the timing on the included washer. In fact it’s gonna be a PITA to remove for my next video 🤣

[@energeticarmament]

The brake is made by TBAC; not Energetic. We just make a mount (EA37) that allows shooters to use their existing TBAC CB brakes and flash hiders with the Lux and many other 1.375x24 threaded silencers. In the absolute worst case you could always remove the mount from the silencer to get a hold on the brake. The EA37 has wrench flats so you and always use a tool for that.

[@hansohnbrothersllc1311]

One way to get a stuck brake out of a silencer is to LockTite it back on the rifle, wait 24 hours then un screw the can from the mount. If that doesn’t work, we have tool for the job. Best advise is to properly torque the mount to the rifle and let the silencer cool down before trying to take it off.

[@foclpoint]

Looks like your groups are backwards. Unsuppresed is the group at 7. POI shift, when suppresed, went up and right.

[@TractorWrangler01]

You need a db meter.

[@MilitiaMillz]

ATF approving form 4’s with no trusts in 5months

[@neilkudoyt4926]

Can you show your entire gun collection!!!! Plsss

[@ShowNoMercy7]

I'm new to the whole gun world. I purchased the ddm4v7p 300 blackout from Daniel defense. Would this silencer be good with it? Please excuse my noobie.

[@willneff1392]

Absolutely

[@thegolflife7565]

I love my Vox-a too almost makes me want a Vox k as well but I’m thinking of going CGS. Either Hyperion K and Helios 556 DT or Helios QD for both...

[@nfareview]

I'm going to be a Energetic Armament Comparison video very soon so I would hold off!

[@brianleabo6295]

Ok quick question is their a can that can run on 7.62 x 39 and 9mm .

[@vincentaguilera4820]

7.62 but not 9mm. It’s a 30 cal.

[@energeticarmament]

The Lux and Vox are both good to go on 7.62x39 as this is a 7.62/30 cal silencer. 9mm will not fit. If you are shooting high rate of fie 7.62x39 from a gas gun (i.e. mag dumps / FA) then the Vox is the way to roll.

[@thegolflife7565]

Do you know anything about the Centrix yet?

[@danielclingenpeel9808]

I need that rifle

[@68madison]

My vox s is sitting in jail

[@makevelicustoms]

Bro that rifle is longer and heavier that you’re little body is 🤣🤣

[@nfareview]

Proof reading isn’t for everyone

[@Dude17768]

Just wondering why this channel isn’t more politically active? With all the bullshit the 2A community’s going through I would think you would voice your opinion on the matters.

[@nfareview]

Because I'm here to review and educate on expensive and lifetime purchases. There are a ton of channels out there, that upload catchy titles and go after views daily. They would be a great source for current political events. I'm also a full time Firefighter and also have a second KZbin channel. I don't have the time to film, edit and post politically relevant and time sensitive videos.