(ENG)Remove Speed Limit Xiaomi m365/pro (MAY 2022 APPROVED/ALL VERSIONS)

[@victorcarneiro4715]

Great, thank you so much for this video. FYI: Top speed on my m365pro with full charge is 32Km/h on S mode 25 on D mode and 15 on ECO. (All on paved and flat roads. I weight 71Kgs). The maximum speed will lower a bit as the battery drains which is normal, I reached a maximum of 28Km/h when on 3 bars of battery and 26Km/h on 1 bar. The throttle response also degrades when the scooter was on 2 bars or less (takes longer to reach the top speeds mentioned above, no different than the OEM firmware IMO). The tail lights worked as normal (they didn’t blink when pressing the throttle. The only thing i found if I can be picky is That if you are cruising at maximum speed and decelerate more than 3Km/h, if you press down the full throttle back, you feel and hear something like a small “kick” from the motor through the handlebars, It’s not bad but not as smooth as the OEM firmware. You can counteract this effect by smoothly pressing down the throttle. This to me is hands down the best firmware so far that I tested on my scooter. It retains all different top speeds on the ECO and D modes, all lights work normally and you get that sweet top speed on S mode :) I hope that’s this info could clear any doubts you may have had and that this firmware works as well for you as it worked for me.

[@Belamarimages]

Victor Carneiro “energy recovery doesn’t work on my Pro” so it’s not good. When I release throttle it continues to go without braking. I uploaded latest stock firmware again and after that I can’t connect the scooter to Home app via bluetooth.

[@victorcarneiro4715]

Belamarimages The firmware in your PRO is 1.7.1? If so, I had the same issue when trying to “fresh install” the Home firmware before installing the firmware from the video. Couldn’t connect via bluetooth with the Home app. My workaround that was to delete the scooter from my Bluetooth settings on my phone as well as deleting and reinstalling the Home app. After doing that it connected with the Home app and I could use the app without any issues.

[@Belamarimages]

Thanks! What BLE version should be?

[@omarwazhere]

Do I need 2 fuses I have a m365 pro but it only has 1 fuse inside the scooter

[@victorcarneiro4715]

Omar Smokes I don’t know about that, if you want to compare with mine, the model is DDHBC02NEB with production date 07/2019.

[@LeeLee-er2rq]

Thank you so much. I don't understand any of the technology and watched other videos which just confused me. I finally found you and it was EASY! You are much appreciated.

[@shackssmc]

The most legit person on KZbin you are very much appreciated I did this in less than 2mins and it works just fine 👊🏻 legend 🙌🏻

[@jonathanhutch2035]

Dublin

[@Larzzzon]

indeed

[@MrTowner87]

So easy to do, I did this yesterday in minutes and it works fine on my M365. Thank you!

[@tpk2195]

Atrama Lt you’ve commented “how do you do it” on a video that shows you how to do it. Are you stupid lol

[@edvardstein855]

Do you need an android to do it?

[@polopopsingalla2613]

how's your scooter ?

[@MrTowner87]

I used Samsung S9+ and its worked fine. Scooter is much faster then stock.

[@olliebell4980]

@@edvardstein855 yes

[@joshsong2000]

It gave my regular m365 a consistent top speed of around 28.2 kmh/17.5 mph! Brakes are more responsive, and autopilot kicks in quicker.

[@cobrasritual]

Can you put it back to normal?

[@Abristow69]

I have downloaded the program but it doesn’t give me the option for full speed. Any ideas?

[@jasonaugustine5894]

Hi, I unlocked the speed it did not make a big difference and my bike has stopped charging since can you please help ?

[@emilvelikov5836]

The same here. Any chance you solved this issue?

[@jasonaugustine5894]

@@emilvelikov5836 I got it done through someone he upgraded it to 44kms/hour

[@girlie360]

@@jasonaugustine5894 did you pay this guy for this service or would he be kind enough to make another video. 44/kph.. impressive!

[@Michael-sc7yt]

Your bike???????????This video has nothing to do with a bike..

[@callmepoison2690]

@@Michael-sc7yt shut up

[@_Karoleiro]

Where do we download the zip files ??

[@robertvanrooyen3889]

thank you for this tutorial. Here is my experience after I accidentally 'bricked' my scooter and how I fixed it. My scooter is a Pro version. In my experience, it did not matter which version of firmware was on the scooter, it was the version of BLE firmware that bricked it. When selecting the preset CFW version in this app and flashing it to the scooter, it worked fine no problem, my scooter was on BLE110 and remained on BLE110 after this preset CFW flash. The scooter worked okay, KERS wasn't working and top speed was only up to 28kmh, so I wanted more speed and KERS to work. With less knowledge than I have now, I flashed BLE71, the available options were 71 or 91 in the app, thinking it would increase the speed. My scooter then became bricked after I rebooted it, as you do every time you do one of these flashes. This meant I could turn my scooter on BUT, the display was dead, it didn't make a beep when turning on and the tail light would just flash, most importantly the scooter didn't work. I could connect to the various apps via bluetooth, this app in the video, I had the best connection with. I then tried to flash to the other option on BLE91, the bluetooth connection kept timing out at different % and I repeated the process a couple of times until eventually it was successful. Now my scooter had BLE91 on it and still wasn't working like before, but the bluetooth connection was now very stable and I was able to up or downgrade too any version of firmware, this also made no difference, still a dead scooter. After googling, I found a BLE90pro flash file and flashed it, this worked and my scooter was alive again. I then made some custom firmware, flashed that and I get up to 30kmh now. Sorry for the long wounded explanation, in summary, the Pro will be bricked if it doesn't have BLE90 or BLE110, flashing either one of those back on the scooter will bring it back alive. In my case, I was able to flash it back via a dodgy bluetooth connection which eventually loaded, if your bluetooth won't even budge or seem like it may work after a number or tries, you will have to go the ST-link route. The app is now showing BLE versions of BLE90pro and BLE110pro, which it never did before. My advice is create custom firmware of your choice and load it via a downloaded file using this app, that way you not changing the BLE and shouldn't have problems.

[@martinkinch]

right now, i have ESC1.7.1 / BLE1.2.2 / BMS1.2.6 so if i create my own custom firmware via m365pro.scooterhacking org it's not necessary change ESC/BLE... , just load mine created config via Xiaoflasher and it will be okay?

[@robertvanrooyen3889]

@@martinkinch From my experience, all you need to do is the load the created file yes. The firmware (ESC) will then change to something like 1.5.5 with the new created flash. I am not sure it will change your BLE as yours is 1.2.2. With my Pro, a custom firmware worked on BLE 1.1.0 and 0.9.0, the custom firmware flash didn't change my BLE. I would flash with custom firmware, if it doesn't work, flash a BLE0.9.0 or 1.1.0, make sure is one of these only though, then flash custom firmware again. Custom firmware flash should work fine on your BLE1.2.2, try that first.

[@audia5321]

Thank you so much. I solved the problem as you described

[@rafaeladamovic330]

How do i make my costom firmware?

[@dekerfdante]

I tried this on my m365 and it works! However, regenerative breaking doesn't work anymore. Should i use an other firmware?

[@klpropertylistings7094]

I have the same model (without display). May i know whether we need to hold te brake and press start button to get the new speed? Coz that was whats needed with downG method. Thx

[@neilreid524]

How can I remove the speed limiter on my iscooter e9 pro or i9pro cause I’m cause I’m stuck going 20mph

[@adamabengadama5041]

hello, will you add a new vid about the xiaomi m365 pro 2 ? Cause it doesn't work with the new firmware of the pro 2 which is 2.2.3

[@willherbert1472]

In this video you did the update, were you still on the latest firmware or did you have to downgrade first in order to get that speed unlocked. Everything I’ve read online is saying you have to downgrade firmware before unlocking speed.. is this new app able to bypass that need to downgrade first?

[@groentje3129]

I did this speed shit and then i updated and i lost the speed shit im fyckinh mad

[@Disparasion]

How do I turn it back to stock ?

[@WhackingJam]

Apart from voiding the warranty, and being stopped by police when they drive alongside you at +20mph and seize the scooter, what are the mechanical risks of unrestricting a m365 pro? Like... does anyone know how long the motor can run at 20mph before damaging it? How hot does the motor get and how much heat can it withstand?? Can the controllers handle +20mph? does it damage batteries and will KERS be overloaded? I haven't done anything to my Pro and I'm already conscious about KERS as I've heard many people have broken their scooters just by coasting even with weak KERS settings

[@kevindarkstar]

Kinetic energy recovery system

[@WhackingJam]

@B Bonly just saw your comment sorry, it recharges the battery by transferring the kinectic energy recovered from braking the front motor, its awful, and it overloaded when I was coasting downhill and bcz its classed as a consumable, i wasn't covered by the warranry

[@brianfajarito9814]

Your very good man thanks for sharing this tutorial to unlock the speed limit of xiaomi m365 it works to me and very easy to do,, no one can beat me now when it comes on e. Scooter :))

[@edvardstein855]

Do you need andriod to do it?

[@brianfajarito9814]

Yes you must

[@w33rie21]

Do you have seen changes with your battery or something can i trust the frimware?

[@adambest8998]

I have just done this on my Xiaomi m365 Pro and it’s works. Thank you so much mate going to have a lot more fun I’ve had 30km out of it so far just over 18mph 👌😎

[@3spority630]

Hi, Where I can find if its essential, pro, etc. I try to find out and it says that is Xiaomi MI365.

[@zainabdullah9516]

18mph Is how much my normal scooter goes

[@gtjust8188]

Man this was easy, such a difference in speed, mine now goes 20mph! Eco mode takes it back to normal speed. Thanks for the video 😊👍

[@21Korz]

What scooter

[@firstlast-ns2qo]

After 2 years still good?

[@gtjust8188]

@@firstlast-ns2qo got rid ages ago, into ebikes now

[@MABUCORP1020]

It works great! Thanks!!

[@clementazaare2055]

Can you teach me how to do it

[@Mrgenady1]

Hi, I just removed the speed limit but now my scooter doesn't have sport mode, it doesn't show whether it's charging or not and I can't connect it to the original MI HOME app. How do I get the usual settings back?

[@alexisgareth]

have you find the solution yet?

[@LidlCarPark]

not sure if you both have sorted this. i had this problem but sorted it by instaling the latest official firmware at the bottom of the app on esc,ble,bms

[@kjaysfinesst7896]

Same thing happened to me have u found out how to fix it ??

[@andrisstepe1417]

Hello. This video is suitable for 365 pro 1.7.1. ? Need to do as a video and nothing else to do? Will the 365 pro be faster?

[@MrMaccBill]

the values did not come out the same and I followed every step. When selecting the cfw it says that there is no file selected and proceeds to have me search my chromebook. would you help me please.

[@floydmix3869]

How do I put my scooter back to stock firmware or which one is it

[@RAINBOW-sb2vb]

I think you need to go to xiaomi home

[@Ugniuzas69.420]

@@RAINBOW-sb2vb no u just flash the newest version

[@alexandrupetrescu695]

Hello , I have the pro version and the firmware v1.6.8 / any problems with this version ?

[@colesaucier]

Hello sir, After reading the comments on this tutorial you seen to be the right guy to ask my question... I just purchased a Xiaomi 4 electricycle and realized after the fact that it only goes 20km an hour... I must have misread the description 😢 Do you by chance have any info on how to increase the speed to at least 25km? Thanks on advance 😎

[@raymundanthony6486]

Would this work on xiaomi essential escooter???

[@hermanschulz1993]

I Wonder that to i have essential

[@OverpowerGrapis]

working with Xiaomi Mi Scooter Essential?

[@yasserabed3901]

Tell me if it works please

[@varperaza]

I would like to know this too!

[@BigJ-bo7wo]

Just done it on the essential, works fine 👌🏼

[@3spority630]

​@@BigJ-bo7wo Where I can find if its essential, pro, etc. I try to find out and it says that is Xiaomi MI365.

[@apoyo2099]

Hey!it works with essential on flat it makes 30kmh easy.But it limmits power to 350w and it struggles wery at uphills,There are bms emulat on xiaoflasher i will try with stronger battery with normal bms,but has anybody tried before?

[@extremedinamit9050]

Thanks you bro! It works my e scotter finaly going 35km/h

[@Adamyamski100]

Since I hacked the top speed my display doesn’t say whether the battery has been charged or not I have a red light on the battery pack but there is no percentage on the display now

[@kjaysfinesst7896]

Same too me bro

[@ericbalmilero]

Great video, worked like a charm. Thank you

[@Shmuel.Rosenfeld]

It also works for xiaomi 1s?

[@benfactor]

Too bad we dont know the details of the file like power constant, is kers on or off and stuff like that.

[@JM-mg2co]

It damaged mine can you help ?

[@ThePaigeMa5ter]

Did this and it feels a lot faster and with more power but the speed limit still displays 25-26 kph am I missing something?

[@callmepoison2690]

Did you fix it

[@rox8033]

thanks. this tutorial the best. for no reason other than to f with me my scooter 365 pro desided to only go 20kmh on s mode. now i go 30 plius thanks.

[@Sander_Bosman]

great turtorial but when i flash the firmware it says error. do i fist have to downgrade to 1.4.1?

[@gtagam3rsgtagam3rs12]

Hi, I do not have an option where the custom firmware button is, all it says is to update the block something ? Any ideas ? Thanks

[@rewqiti6733]

is this working for other escooters with sped limit aswell?

[@kieranobrien988]

I finally bit the bullet and tried it and it did work perfectly many thanks

[@edvardstein855]

Do you need an android to do it?

[@bene3502]

Do you need the Pro model/pro Board?? Or does it work with both (m365,m365 pro)

[@NightMareRh11]

Which reset to default should I use for a xiaomi m365 to return to factory settings?

[@ivandeak3703]

www.google.com/search?q=m365+factory+reset&oq=mi+365+factor&aqs=chrome.1.69i57j0i19l2j0i5i13i19i30l2.4502j0j7&client=ms-android-samsung&sourceid=chrome-mobile&ie=UTF-8 Do this and it will work

[@hillelohayon2664]

And does it matter if it's Chinese or European production? Or does it both work?

[@priyadarsheepanigrahi6107]

Great Video and Easy Advice. Thanks. I have one question - will this hamper my 1 year warranty? I mean if there are any issues related to the scooter and I take it to the service center, will they find out about this issue? Or shall I reset the software adn then take it?

[@dueltheman]

Hello, thanks for your great feedback! I think you should reset the firmware (go back to an official one) before going to a service center, just by precaution...

[@Vader294]

DuelMan a few people have asked how to restore back to default. It would be nice if you address that very important question

[@fvz7575]

@@dueltheman hllo

[@zembo529]

@@fvz7575 ya hi

[@cobrasritual]

@@dueltheman can you put it back to normal speed?

[@shackssmc]

Dam this is the real deal I just done whoohoppp thanks bro your the real deal 👊🏻👊🏻👊🏻👊🏻

[@rayanshehadeh1518]

Is this unhealthy for the scooter ???

[@edytujkana6633]

No answer 😢

[@kannonhoyla4756]

I downloaded the app but it needs donation to go to the premium CFW toolkit😭

[@daleycarter]

Better pay the developer then

[@asafmorazable]

Thanks for this video. I installed it yesterday, it drives faster but there is no engine brake now, only regular disc brakes :(

[@dueltheman]

Hi, thanks for your feedback :-) Which model do you have? M365 or PRO version?

[@asafmorazable]

@@dueltheman I have m365 but i allready manged to solve this issue :)

[@louiscomhaire5979]

אסף מורז how did you solve this problem??

[@Guy-04]

רגע רגע לא עבד לך הברקס החשמלי איך פתרת את הבעיה? ותגיד שווה לפתוח ולנסות זה עובד?

[@stanislavtokarev1718]

@@asafmorazable how did u solve the issue?

[@jaceyleesharp5678]

Hey dual man does the battery have to be fully charged before you do this

[@romanpetrache]

Let's say I did the firmware update and I might not really like it and I wanna go back to the default firmware?

[@Samdatnigaa]

factory reset the scooter through the app

[@kafishteakeepersjourney4479]

How to reset it?

[@hamada1ful]

I managed to get full speed after I did it, but unfortunately it stops recharging until I put it back to original firmware it started to recharge again using the charger. Maybe this is a bug need to be fixed in the update?

[@alexmoumouriss]

How did u put it back on the original firmware?

[@skycamvideo]

I've just bought a mi scooter used but not sure what model. I've tried the home app and it says owner needs to un register before I can connect. So not sure what firmware it's got etc.. seems to max out at 16 kmh . Would it be ok to just try this app ? Just want about 20 mph. Can you make the scooter show mph instead of kph ?

[@ayberkfahri]

I have tried this and for my M365 Pro it only gave extra 5km/h and that is only with the free wheel turning. With me on it it does not go over 27 km/h. In the video the button in the application says "Remove power and speed limit" but when I did it it said " Remove Speed Limit" might it be the case that it does not remove some power limit?

[@mladenstolic2156]

How can i restore settings to default like factory?

[@kraphun]

update the software in xiaomi app.

[@tylerschannel.1186]

Your mi home app will recognize that the software is not factory and will pop up when you open and will continue to do so every time the app is opened. So whenever you want to go back to factory just click update and your good 🤙🏽

[@goblin_bros5082]

Hello I have a Xiaomi m365 pro 2 and I was wondering if I need to check if my scooter needs to have two fuses to use this firmware. Can you please tell me if I need to check that?

[@juliusravnstedhansen5281]

does this destroy your scooter

[@philbearman1283]

I flashed the wrong custom fire ware camialfa ble073 and my scooter then wouldn’t go into S mode, I tried to flash it back to the original and it didn’t work, I then flashed it again with the camialfa and its now not turning on.. HELP!!

[@ShaktiSingh-uv4mb]

Try connect it to an IOS device, when connected, launch the Xiaomi home app and it should give you an option to update the scooter. Update it and it should.be reset to normal and then you can try this again

[@Bcabral101]

I donwloaded the app, but the menu options look different to yours. I tried to adjust premmium settings and managed to change values of max speed to 45kmh, flashed the scooter firmware, rebooted scooter, but the speed doesnt go past 30kmh

[@Silvercrest231]

HI My scooter( M365) keeps running after I tap the accelerator to turn off the cruise control. The motor comes down to a slow speed but is still running. It only turns off if I come to a halt. Any ideas? Thanks

[@extremesalci2679]

This is really not fake ,and you dude impress me ,i follow your steps ,and on the end it really works ,thank you bro so much ,but i have one important question: does this chip or remap work for all time ,I mean forever ,or no ? Thanks dude again

[@ryanrullii3398]

It's work for my xiaomi m365...Thanks bro...

[@realspyros7704]

Does the application need to be open all the time or do you do it once and that's it because when I close the mobile phone a sound is heard from the scooter

[@michaelshuingchingco1873]

how can i return it to normal speed limit?

[@ttrecords.official]

it is what it is

[@eetskull]

Hold gas button with power and brake Then when shows 14 in speedometre İt will reset to fabric settings

[@user-xn4yu5rn9q]

Hi Deulman, My scooter’s front flashlight blinks with weak light. Is that normal? If I ride with flashlight on, the scooter would run for a bit the suddenly stops(not losing power, but stops)

[@spirofn5030]

A lot of you guys that you say doesnt work its maybe because you all have one fuze. You need a two fuze scooter and you know that by checking your battery date. If it is made before march 2017 then you only have one fuze. If it is made after then you have two fuzes. If your scooters number is 16133 which is the european black model you will automatically have 2 fuzes.

[@mos.f5810]

Hi , my ESC version is 1.6.8 and my BLE VERSION IS 1.1.0 and the BMS is 1.2.6 so does it work or I have to downgraded to like yours ?

[@adamkambo8315]

@duelman does the speed still occur everytime you switch ghe scooter on or only when you connect to the app

[@FaizanNasir]

Hi I've got a problem. My scooter keeps running after I tap the accelerator to turn off the cruise control. The motor comes down to a slow speed but is still running. It only turns off if I come to a halt. How can I solve this? Thanks

[@e53]

Just ordered an M365 Essential, would it work normally on it?

[@user-lp7bd9xz8z]

Hey dude excellent video👏 much appreciated. Was wondering if you also knew an easy way to lower the cruise control engange time? And also lowering the push to start speed to maybe 3-4 mph instead of the factory 5? Thanks again

[@alexrobert4766]

To lower the cruise control keep it at the same speed for 3-5 seconds

[@thebasiczombie3016]

Does this work on the 1s or is it just the M365?

[@riod3953]

Im getting the following Error: too many errors or retry attempts! Reboot scooter and app and try again... Help! Thanks in advance

[@erickcouto]

did it work ?

[@kobeCornelis]

I'm having some issues, this is typical that this stuff doesn't work with me. I open the app, press on my scooter but it doesn't connect right away, I have to press this icon and then it connects, then it prompts me with a message to press my power button once to identify the scooter, but nothing happens, after that is just disconnects by itself. I've tried restarting everything but nothing works...

[@RafaelQuizonvlog]

Great tutorial i will try this to my m365 classic. Im so excited

[@JonasM754]

Worked?

[@eskilhjortland7961]

Jonas M It did for me👍

[@Lawrute117]

It worked for mine classic one too. But I can't see flashing lights on dashboard when it is charging so I have to go to the m365 app and see if it is charged fully or not.

[@eskilhjortland7961]

Laura Adomaitytė I have a charger that has a green light for when it is fully charged and has a red light for when it is not. You should check if your charger has the Little light to.

[@Lawrute117]

@@eskilhjortland7961 yes it has. When I used stock firmware charger showed green light when it was fully charged, now after the flash it always shows a red light. Dashboard also don't show flashing lights when it is charging.And also my engine break doesn't work. Do you have these problems too?

[@SimonStuff2000]

After i change the software on the scooter ,Xiaomi Mi Essential, i loose any kind of guaranty? 🇷🇴

[@crzds8196]

does it work with xiomi scooter essencial?

[@allabouttrap352]

you have to have next to the scooter the android or it’s not necessary?

[@eyalbarkan]

hi , after download the xiao flasher i doesn't have the button of "CFW FULL SPEED MORE POWER", can you assist how to remove the speed limit? my scooter is 1S thanks

[@jamestran5161]

Me to

[@OskarRapalski]

mine m365 (normal) is 1.5.6 and after this one, it has lower speed then by default and after releasing the gas it stays on lower level of speed but still ride automatically untill I click brake (like cruise but its no cruise at all) any idea?

[@danx3504]

Hey bro my question what about if u want to go back to the original speed. How do u do that?

[@BugsyPacino]

Dan X I’d like to know this as well

[@MrInterventionkid]

Yes me 2

[@mojbr704]

Use the original app and reset the scooter so it will work as if you never hacked it

[@BugsyPacino]

Mo jbr thank you

[@Sikkunt_alex]

@@mojbr704 how reset

[@memzgames1858]

HI, so all i do is download this App and then just select 'Full speed' version on it? my firmware version is 1.5.1 so should i do what you've done? or is there a seperate way for my version. Thanks :)

[@dueltheman]

Hi, yes, it's as simple as that :-) It will work with your 1.5.1 version :-)

[@realtxxy]

Hey can any of you anwser. Is this safe to do on the m365? In the video he does but is the only drawback less range or could there be more severe issues with this mod?

[@daddyture8174]

I know this is long ago but do you have. A way to remove the speed limit on the ewheels e2s v2?

[@Ps3Dude321]

Thanks a lot man , it has worked with no problems. It’s only added around 5mph speed but still happy , thanks 😊

[@Ps3Dude321]

How do I reverse it back to normal? The battery goes down too quickly so I’d prefer it how it was buddy

[@firstlast-ns2qo]

@@Ps3Dude321 lol

[@robozstarrr8930]

using the free "CFW Fullspeed 47.1 kiB" file, all i get upon finished flash completion too many errors or retry attempts . . . does one now have to pay in order to upgrade? thxs

[@mandarkman2171]

When i try to agree the location it still says that i have to agree it and its just doomed like that

[@kevincoupland2518]

I just did this and the dashboard display went black, and the brake light is flashing 1 then 4 quick flashes... is my scooter broken for good now or is there a way to fix this? Please help, thanks!

[@Seriallchiler]

I have 365pro,v171. I instal app,push full speed button,and add that custom firmware. Now on scooter firmware is 1.5.5. i try scooter,and everything is the same,same max speed is 25 on s mode. i have 75kg,and speed and torque as the same like the original v1.7.1 firmware. Like there is no upgrade at all.Any help?

[@Boiisblack]

i already done a speed hack with my m365 which I accidentally well ease my even that fat or faster and not it’s on 1.6.6 can I still change it to the one that your using?

[@sherwinburgos5070]

Bro!!!!! Ya his is awesome!!! Thanks a bunch!!! You rock!!!

[@fraguzz]

Did this on my m365 .. non pro.. it only has 2 modes.. i guess im not getting the performance mode.. top speed 28km/h 100kg. Is there a way to unlock performance mode without changing the display?

[@PlazmaBEAST-kl8sh]

does your phone need to be connected to your scooter at all times for this to work?

[@fissionplane32]

No lol

[@winstonbrown1516]

That's what I thought after doing this as I can only get max 25.7Km/h r16mph. Did you get any more info?

[@fissionplane32]

@@winstonbrown1516 charge your scooter dum mass

[@nazo493]

How do you revert back to original settings afterwards?

[@PureGaming80]

Is it possible to reset the scooter back to factory settings after installing a firmware

[@stockman7337]

Hi, I flash it with the full power preset and the scooter will not slow down when I release the throttle. Does anyone have all the settings for this preset. I think it is set to no Kers which it says might damaged the controller. I just want to replicate this preset but with Kers.

[@kenanmemagic7769]

How much kmh has the eco modus after flash? Still 20kmh?

[@jensevald1291]

Great improvement, but how do I reset my scooter to stock setting? I can't use the home app anymore. Please help🙏

[@safiroemar3132]

Hey any idea which option to go back to default settings ?

[@svelinjak]

Will this work on my Xiaomi Pro 2 ?

[@carlosvennat957]

Has anyone told u yet

[@seriouxsound4934]

Hi.if you do this the scooter saves in memory or evey time you has to open the apk?