Engine mount replacement on Focus XR5 Turbo/ST225/RS mk2. Step by step by OEM Denied Performance

How to replace engine mount on Focus XR5 Turbo/ ST225 / RS mk2. Step by step by OEM Denied Performance. Genuine Ford, aftermarket and aftermarket uprated mounts available from: focusonperformance.com.au/foc...

[@duhfc]

Ty for your videos

[@Madogen]

Nice one mate, cheers.

[@Madogen]

Did this today, worked perfectly, cheers.

[@debbiehennessy3738]

Yep 😂 i suspected this my all 3 done for

[@reeisessit]

Hi there, I have installed a new one after 1 week and the dome doesn't look right it's like inverted to like 50%. Is it already shot? Thanks

[@PHIL4913]

Paused the vid to check an engine mount on my car. Seems to it has to be replaced with a new one. With how much torque tighten these bolts? Thank you

[@OEMDeniedPerformance]

torque settings are at the end of the video

[@hohoshang32]

How do you tell the difference between a bad engine mount or a bad gearbox mount?

[@FocusRS500]

Both will make the engine wobble a little bit at idle...or hand brake on and rev 1st gear but don't fully engage the gear, like a hill start, and watch the engine Jump out of the bay

[@TomS-mo1ox]

Great video 👍🏻 I’ve been told to replace this mount due to vibration in the gear stick while in 4th gear only. Would you agree ?

[@OEMDeniedPerformance]

I would just lift up the coolant expansion tank and visually check the mount before replacing. Personally, I dont see how a bad mount would only give vibration in 4th and not the other gears. (doesnt make much sense for it to do that, itd be in all gears)

[@TomS-mo1ox]

Yeah I would agree. Any ideas on what it might be or come across this before ?

[@TomS-mo1ox]

I’ve noticed one of my coolant (Silicone) hoses rests against the gear fork on top of the gearbox. I feel the engine mount has gone and is vibrating the hose which in turn is vibrating the gear stick in 4th. I’ve noticed it does vibrate in other gears but 4th is just a lot worse. Also, can those of us in the U.K. order products from yourself and your store ?

[@juancarlosruizvasquez2546]

Do you have the torque specs for the screws?

[@OEMDeniedPerformance]

Torque settings are shown at 6:45