Engine Oil and Oil Filter Change - Nissan Micra K12

How to change the engine oil and oil filter on a 2003 to 2010 Nissan Micra K12 1.0, 1.2 and 1.4 liter petrol engines. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Oil Filter ~ amzn.to/3BYLcv5
🚗 5W-30 Oil ~ amzn.to/3AiEUVT
🚗 Sump Plug ~ amzn.to/3C32WWu
🚗 Sump Plug Washers ~ amzn.to/3QEw1eS
🚗 Oil Filter Tool ~ amzn.to/3JQO536
🚗 Socket Set ~ amzn.to/3BmbuHr
🚗 Oil Catch Pan ~ amzn.to/3JaCziP
🚗 Torque Wrench ~ amzn.to/3BrRJ1n
🚗 Trolley Jack ~ amzn.to/3zeXsod
🚗 Axle Stands ~ amzn.to/3dloRgZ
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@markwilliams2830]

Well filmed and good Info__Thanks for explaining which way round the sump washer fits.

[@screwsnutsandbolts]

You're welcome 👍

[@minimal5369]

thanks alot man really helped me out today with my oil change

[@screwsnutsandbolts]

No problem 👍

[@paw_bmx]

Thank you, going to change it on my fiancée’s car soon 👌🏼

[@screwsnutsandbolts]

You're welcome !

[@aatonhernandez3561]

Great video

[@screwsnutsandbolts]

Thanks!

[@Bolek_i_Lolek]

I think I already know how you set the tightening force with a torque wrench. The service manual specifies the tightening torque of the sump drain plug with range: 29.4 ~ 39.2 Nm. The average value between 30 and 40 is 35 Nm But you forgot one thing ... ... remove the spider's web from the engine ;-)

[@screwsnutsandbolts]

That spider's web is holding the car together lol :)

[@troya915]

Bravo

[@screwsnutsandbolts]

Thank you !

[@abdelhakimsoltani217]

Thank you ever so much you have helped me with my oil change One thing I wanna ask I put 4l oil micra 2005 1.0 is it ok ? Thanks

[@screwsnutsandbolts]

You're welcome. 4 liters is a bit too much. Check this link: www.kia.com/dm/discover-kia/ask/what-happens-if-i-put-too-much-oil-in-my-car.html

[@adnansulayman8753]

❤

[@screwsnutsandbolts]

Thanks !

[@joeledixie1]

Hi guy, I have a Micra K12 1.5 dci K9K engine, could you kindly tell me where the engine oil level sensor is located... many many Thank you very much

[@harrydosite7563]

J'aime bien votre façon de conseiller les gens . la nouvelle norme d'huile pour les nissan micra K 12, k13 ou K14 essence est : " 0w30 ou 5w30 " . de préférence : " Shell 0w30 ECT C3 ou 0W30 ECT C2 C3 . je l'utilise dans ma micra K 12 1.2 L 65 CH essence et le moteur marche mieux ! Pourtant elle a 200 000 KLM ! OW30 permet une durée de vie moteur et des performances motrice permanente , même dans les pays tropicales***

[@screwsnutsandbolts]

Thanks for your comments !

[@dunbustin]

6:30 It is three litres.

[@de51gnz]

I have a K12 manual transmission and I am thinking of doing an oil change on it. Is this something you are planning to film ?

[@screwsnutsandbolts]

Yes I will be doing that within a few weeks.

[@screwsnutsandbolts]

Hi, I just uploaded a video about changing the K12 gearbox oil. Cheers: kzbin.info/www/bejne/ZqjJf4WgmcqbZ5o

[@vaisnavisivarasa5725]

Hi can u tell me what size spannar your using

[@screwsnutsandbolts]

14mm for the sump nut.

[@watchyourjet]

Why there’s a need to remove oil filler cap before draining? Does it not make sense to keep it closed so no debris can fall inside the oil tank? Thanks

[@screwsnutsandbolts]

The workshop manual instructions advised taking off the filler cap before draining the oil. You could probably leave it loosely covering the filler hole if there was any risk of debris getting into the hole.

[@watchyourjet]

Question: Can you reuse oil filter?

[@screwsnutsandbolts]

No I wouldn't advise that. They're usually very cheap to buy.

[@RedStar89]

Is 10w 40 ok for my micra k12? I live a hot country

[@screwsnutsandbolts]

The manual only recommends 5W-30 oil

[@rowidrowidals7372]

My friend, I put 10W40 oil in the 1.4 engine, but the oil is missing. Why? Note that the engine is in excellent condition

[@user-io3dm1ld4m]

I think 5w30 oil is better

[@eraykoca679]

80ps?

[@screwsnutsandbolts]

What is 80ps ?

[@malleckkadell7413]

Owner of ak12. Just watched your video. Regret to say that the engine is very dirty. Has not been cleaned and maintained and not pleasant to look at. Simple appliances of wd 40 and other similar products would have given a better appearance. I do it and I'm sure thousands do it. Without any offence. Salaam.