Engine Toyota 22re + 5 speed and 4x4 offroad transmission full 3d printed

Motore Toyota 22re con cambio a 5 velocità più retro e innesto riduttore marce e azionamento 4x4

[@Barnacules]

This is absolutely stunning, well done!

[@AleFusi]

:)

[@samlitsas7770]

I LOVE YOUR VIDEOS!!!!!!! oh and nerdgasm is alright I guess ;)

[@kkirschkk]

how much does this weight? would love to sell stuff like this!

[@AleFusi]

+The Reeper about 6/7 kg

[@kkirschkk]

Ale Fusi so at $50 per KG and $0.10 per hour of printing and $140 other stuff would mean about $500 to make, so how much do you think you could sell this for?

[@TheDgdimick]

I just started printing my Transmission, waiting for some of the nuts and bolts to arrive. You video is BY FAR the best example I've seen on how to assemble the Transmission. Thanks,

[@canadianguy7875]

That is beautiful. I just printed the transmission to give to my dad and this has inspired me to do the whole powertrain for him. Great job. Beautiful print.

[@mattjaskot2347]

This is just about the coolest thing I've ever seen 3D printed! Really well done!!!

[@F-Man]

This is amazing! Mechanically functional engine, gearbox, and transfer case! I want!

[@danielebert9530]

This is awesome! I want to print one!! Great work, it reminds me of my high school days working on my 87 4runner.

[@hrivera4201]

The world is not the same! I can see the future, thanks a lot.

[@Loudannoying9186]

Am I the only one that looks at this and says it's time to give my sons fisher price jeep a A new rear transmission

[@kylewitter2806]

I love that there’s a transfer case for 4 wheel drive

[@isaacfrench4908]

Awesome build. I noticed the fan is moving the wrong direction if it even mattered lol

[@Meghdey]

Absolutely amazing video. These kind of videos make up for all the other random trash on KZbin.

[@IPv4Address]

This man can 3D print an engine, a transmission and a transfer case but not a camera stand lol Great Video Though!

[@PapaOrlando]

this is the coolest thing on the internet

[@reactionleaction3278]

2:21 it even grinds. Take my money

[@JRC54]

Your using a Arduino to power it, absolutely amazing. I love it

[@AleFusi]

yes, for driving the stepper motor

[@BashamVlogs]

You should build the 22ret. It should be easy you only need to make a manifold, turbo, and intake piping.

[@godofyota9541]

Coolest thing I have seen in a long time!

[@DIYKAI]

Excellent are you the original maker of the file on Thingiverse?

[@saintsage]

damn!! nice work!

[@JSCB-365]

I saw a picture of this years ago on pintrest, and even found one of your videos back then. Fast forward to now, I have a 3d printer and whats the First Large Project I undertake? This of course. I have most of transfer case and transmission cases printed. I cant wait to put it all together. Any chance you can model the propane and turbo parts for me. I will link a video in my next comment.

[@JSCB-365]

kzbin.info/www/bejne/hZqTqpSIYtilo6c

[@alexkapinga2024]

WAIT!? When you put the head back on... what about the valve timing? wouldn't it be different?

[@guidovollmer249]

Super, gefält mir sehr. Wo kann man den die Teile oder Daten bekommen ? Great, I like it a lot. Where can I get the parts or data?

[@danydp96]

Veramente bello! Mi potresti dire dove hai comprato il materiale non stampato?

[@oceanchaser]

labor of love I wish I had the time to make something like that.

[@MrPon4ik1974]

зачёт, засмотрелся. отличная работа

[@LMF5000]

This is fantastic. Do you think there's a market for something like this? I mean print copies for people and charge them money to buy them?

[@sandy__matt]

Amazing job..that grind at 2:21 made me a little sad though :(

[@maxdavies9958]

Needs a clutch

[@beefybread5769]

@@maxdavies9958 no gonna happen unless you somehow find high friction pad

[@silvia_fuku0ka845]

@@beefybread5769 tbh it doesn't have to be high Brixton you could use gear like surfaces it's not carrying any load sl it would be ok

[@TechyRodsWire]

Printing this now, well trying it out. Had to downscale to 70% percent. So we will see

[@JMunoz-tw1tf]

Really impresive, nice job! How much weight the whole model? PLA is about 15 euros per kilo, so it must be quite expensive right? I'm thinking about doing something similar

[@AleFusi]

JoJo Jo Thanks... about 4/5kg

[@maxs.8146]

It‘s a piece of art

[@moz__6148]

Cool! All it needs is some functional clutch =D

[@3dprintwiz378]

OMG, your the 3D printing GOD man. Nice large build. How many man hours have you spent on that project so far?

[@davidpalma4099]

180 hours without ensambling

[@77936fief]

we make the drivetrains for these engines. printed one already, hope the scale is the same as the engine :D

[@Squidysquid69]

Did you design this all yourself? If so that is really amazing!!

[@Squidysquid69]

And what printer do you have?

[@AleFusi]

Squidysquid 1 i have a Delta 3d printer home Made!!!

[@luisdelcid4250]

very nice i owned a 84 celica GT and several pick up trucks my dad's favorite. where can i get 1 of those models

[@flipperbooch2194]

The only thing it needs, it some oil, vegetable oil even, something to lubricate it even a little bit it’d run so much easier

[@3dprintwiz378]

if you don't mind me asking, what printer are you using? Seems to have very good quality outputs.

[@AleFusi]

I took six months to build it ... i use a Delta home made ... in my channel there is a video with features of my printer

[@cristhianpichelli7088]

Che spettacolo

[@Classlessrook32]

Hey, so ive been working on mine fir a while now but im unsure if where to buy the valve springs can you lead me in the right direction?

[@milenedejong1400]

that is art .... wonderfull !

[@chasec]

So... If it's fully functional... Is it still drawing in air and pushing it out? like the manifolds aren't solid right?

[@AlexisHerrera393]

It's a dream, simple amazing nice job I want one :-(

[@AleFusi]

Thanks

[@sopela123]

Hi can you give please tell me how do you link the motor with the transmission?

[@ionutorama]

Awesome! Can you please give me the link with te 3D model? Thank you so much!

[@Miguel199485]

Hello, what a good day, I am new to this for a short-term project, the prototype is very good, I am interested in building my own, would you help me, with the datasheets to implement one, that means. Each gear has to form a similar one. Many thanks.

[@Miguel199485]

you will have an email to contact you.

[@eugenioca01]

Incredible work !!!!!

[@carlos010581sv]

have you considered producing a bunch for selling?

[@pabloleonar2591]

GENIO!!!!!!!!!!!!!!!!!!!!!

[@subutayozselanikli]

Amazing effort.

[@adamelkoumy5141]

How many kilograms of plastic have you used please? Great work

[@AleFusi]

Tommy ELKOUMY there are about 7 spool of plastic.. 400mt/spool about 2.8km

[@nicholaslenzini1759]

How do you get 1-2 and 3-4 to not drag each other with them?

[@wingman358]

Do you model these yourself? Or do you find the models somewhere?

[@AleFusi]

i have find in the web

[@mustier5321]

And the timing than?? 🤣🤣 It's just epic. ✌

[@herman3694]

How much did all the filament bearings screws etc cost

[@makewithmegma]

👌👍

[@sebastiancojuharii5958]

Can you please tell me how big it's your 3D printer,i would like to print this too,but for the biggest part i dont know if my printer size it's good.

[@AleFusi]

Sebastian585 250mm dia. 320 Z

[@user-pd9vm9ts1o]

NO do a 13B MAZDA !! or 20B MAZDA !!!

[@thebrakshow7415]

2:21 if you can't find 'em ... grind 'em!

[@AleFusi]

:P

[@gurbeerathwal9406]

Its even 4wd.

[@Xbasic3000]

AMAZING!

[@nico3962]

Hello, What is the gray thread used? It is really very beautiful! Thank you

[@AleFusi]

nico3962 FiloAlfa alluminium metallic

[@Gainscorpio]

wow wow wow. Amazing, great job

[@mattiagentile]

Grande @Ale!!!

[@protoborg]

Why did you start this with it in gear?

[@wladimirkarpenko6320]

What springs did you use for valves?

[@MtechGarage]

Where can I get STL for gearbox is great

[@hervespitfire1286]

Fantastic....

[@kevdody]

Not easy with one hand haha x)

[@type2523]

What is the 3D priinter that you are using !

[@zeroalcohol]

What's the building cost?

[@andreyyoshkage8635]

how you conected transmission and engine?

[@krogerm]

My son just got a job at a transmission shop. How can I go about getting one of these?

[@tommallinson619]

You 3d print one.

[@SgaboLab]

Bellissimo .. ottimo assemblaggio .. quanto ci hai messo a stamparlo ??

[@AleFusi]

grazie 1000... ci ho messo 5 mesi... tra stampe aspettare che mi arrivassero i cuscinetti e il montaggio

[@SgaboLab]

Potresti pensare di ristampare le parti case in pla trasparente così da intravedere il movimento delle parti interne e con l'aggiunta di qualche led sarebbe un soppramobile spettacolare ;)

[@AleFusi]

+SgaboLab per quanto possa essere trasparente secondo me non permette di vedere poi molto...

[@SgaboLab]

umm ... mi sa che hai ragione :D

[@BP-zu1iz]

Amazing! Love it :)

[@cesarcarvajal7425]

Increible me gustaria poder construir uno igual

[@fnarvii1810]

What if you hooked it up to a compressor?

[@AleFusi]

Geirlodnir a compressor for? to move the engine?

[@jonathan7744]

yeah... like high speed movement... maybe even putting that transmission into a mini car....

[@beefybread5769]

@@AleFusi you should try it. Put stepper motors to move the shifter. Electronically controlled valves to push the pistons which have gaskets so that the air could push them. You should also somehow find get a clutch

[@elCaminaTor]

Impressive.

[@giovannalouiseandradecoelh7507]

muito bom! quanto você cobra para fazer um desses para mim?

[@protoborg]

What's the rear shifter for exactly?

[@makewithmegma]

😲🔥😍❤👍

[@edwinwal3123]

Wouw.. super.. thmbs up...

[@calbur]

If anyone with more mechanical knowledge can answer this for me I would be grateful: How is this able to work without a clutch? Is this a different engine setup that doesn't require one?

[@protoborg]

Works MUCH better with a clutch.

[@joachimkolberg3360]

i love it:D

[@2strokeFORever]

When you put the head back on at 4:03 how do you know it was in time?

[@AleFusi]

in this case I do not know because I put it back at random, and the valves probably hit the head, but I have references to put it right

[@2strokeFORever]

@@AleFusihaha I'm just messing with ya. Was gonna say good thing it's not an interference engine :p the detail of this is amazing though. Much love

[@Zeleny_Vaclav]

Wow

[@lamie3958]

OH MY GOOOD!

[@moehoward01]

Looks like about 18 months of print time.

[@ronniemarshall4636]

Where can I get that fit to buy

[@gopikrishna1832]

how to assemble the transmission ??

[@vuviet891]

amazing! can you give me the file of that engine? or file size details ?

[@AleFusi]

vu viet you can fin the full Project on thingiverse

[@user-pd9vm9ts1o]

Looks like a Toyota 22 re ? How much does this cost ???

[@AleFusi]

about 4/500 €

[@user-pd9vm9ts1o]

What about transmission costs?

[@AleFusi]

only gear box?

[@user-pd9vm9ts1o]

Both Engine and Gear Box ?

[@shariffahim7649]

Where from buy it ?

[@G_O_L_U_B]

very very cool

[@filiptechguides3348]

Is there link for all parts? :) Great job!

[@adinglavic8418]

This particular model is 3d printed and cannot be purchased online

[@adinglavic8418]

It can be downloaded,printed and built

[@voldy3565]

@@adinglavic8418 Um yeah, where?

[@dingo-gorditas]

2:22 grinding gears lmao

[@mrskorpion4199]

Сколько ушло пластика? 4-5 кг?

[@eliseogutierrezlujan8966]

This is cool

[@afdhalafiqtan3930]

nice!! i like it ;)

[@Creeperboy099]

nice toy!

[@uno21858]

What printer you use?

[@AleFusi]

Erick SANCHEZ my delta 3dprinter home made

[@lucamanno4948]

quanto tempo ci hai messo a stampare e assemblare il tutto?

[@AleFusi]

Luca Manno circa 5/6 mesi... Ma senza fretta... Non stampavo h24

[@lucamanno4948]

Ale Fusi effettivamente quanto è conplicato l'assemblaggio? Ho visto che su thingiverse ci sono tutte le istruzioni ma per uno che non ha mai montato nulla del genere e non conosce molto bene i motori è difficile?

[@AleFusi]

Luca Manno un Po di manualità e conoscenza meccanica se la si ha male non guasta... anche perché reperire tutto ciò che era scritto nel file non mi è stato facile e con qualcosa mi sono dovuto arrangiare diversamente... ad esempio le mollendelle valvole, che non riuscivo a trovare nulla abbastanza morbido da farle lavorare... oppure i motore che fa girare il tutto nella quale io ho messo un motore passo passo

[@lucamanno4948]

grazie! gentilissimo magari prima o poi lo faro' anche io adoro questo progetto