Only a true Toyota enthusiast would spend this much time on a engine that makes mid 100 H.P. love it
@REAPER3fitty2 жыл бұрын
Well said.
@madmod10 ай бұрын
100hp in the right car is a blast. My 22r is in a 800lb sandrail
@josephdavis2427Ай бұрын
180hp NA isn't terribly difficult. These engines had a place in circle track, so much that Holley made a spreadbore intake for these. No fabricated intakes allowed. Granted, below 9K RPM is the realm we're talking. My 6.0 LS was 402 HP and crapped out before 180,000 miles. But my R Toyotas went 400,000+ before anything serious needed looking into. It's the torque, in a small package that goes decades which gives these engines value for me.
@user-ft2md2gd4s2 жыл бұрын
This channel is easily on the top of KZbin in this category. Top quality builds and top quality videos.
@austinniemela2 жыл бұрын
Thank you!!!
@Retroyoda Жыл бұрын
@@austinniemela how much do you think the whole built was?
@tommyg73812 жыл бұрын
You can always get a roll of gasket paper and make your own gaskets. The rolls come in cork and paper
@markgarland90005 күн бұрын
Oh my gosh..what an incredible build! Beautiful! The rocker arms segment took me back to about a year ago. Had a new cylinder head put on my '88 22R. A short time later a light tapping occured. The head had been replaced after a valve snapped right at the keeper and dropped just enough to gouge the piston. Nearly 200,000 on the engine..mechanic puts on a new head..with the original r. arms! Down the road, the new cam dislodges one of the wear pads on the old rocker. Thus the tap! Back to the shop!
@Operative1142 жыл бұрын
That engine is a work of art. The black, silver, and gold with red accents works so well.
@rudyrico64332 жыл бұрын
Austin never disappoints with his work!
@becomingabetterhuman.29946 ай бұрын
One of my favorite engines of all time 22r/e, 4age, 3tc, and 2jz. I am a 16 year Master Ferrari technician.
@DuanDao2 жыл бұрын
The color of that valve cover is amazing
@marktrollope30942 жыл бұрын
Aaaaah, my Toyota fix for the week - you're a legend!
@billocampo13652 жыл бұрын
That engine is sick, love the valve cover color and the rest..you really amaze me how meticulously you work..
@austinniemela2 жыл бұрын
Thank you very much!
@ejaokay9 ай бұрын
You were not lying, that is a beautiful engine! There's nothing quite like assembling an R series engine on a stand. I did my 22re a few years ago and it was so much more enjoyable than wrenching in the engine bay. Super satisfying to slap it all together like Lego bricks.
@bhmsupra Жыл бұрын
I wish you'd consider building another 22r like this one, putting it in a crate and shipping it to me. Not bluffing. Not in a rush. Very patient and willing to make a very fair deal for you sir.
@davidteixiera83982 жыл бұрын
Color combo is out of this world bro Lc engineering has the Teflon gaskets like I'm running on my 22R
@AntonioClaudioMichael2 жыл бұрын
Gorgeous 22R bro
@gprz8432 жыл бұрын
Great job bro, don’t forget to seal the upper oil pump bolt too!!!
@austinniemela2 жыл бұрын
Ah yeah I forgot about that bolt too!! Thanks!
@ericsugalsku18262 жыл бұрын
Austin I love your attention to details. With work and family I never seem to get everything as perfect as your builds. I just finished a year and half build on my 1979 K30 and I'm never quite satisfied.
@MussaKZN2 жыл бұрын
The Toyota oil filter pushed me over the edge. You are the GOAT.
@jeromedamian57403 ай бұрын
It's nice when you have all the right equipment and tools to get the job done.
@johnrobert10532 жыл бұрын
So clean! You always seem to out do yourself. The level you apply, to what I see is hands down some of the best. Keep it going
@algafrimohd6812 жыл бұрын
I admire you a lot and your job is clean. Keep it up. You have a great mindset in cars, and God willing, you will reach a million followers
@austinniemela2 жыл бұрын
Thank you so much 👍
@victorrosario4109 Жыл бұрын
I Just found & bought a 1985 Toyota Hilux a few weeks ago with 223,000 miles on it, to use as my daily driver. Not realizing how famous this engine is. I can only dream of being able to do something like that to this engine one day. Awesome built. Cool video.
@dyrnenorka2 жыл бұрын
Man i just don't get why you don't have a million or more subscriber, you are a true artist in what you do. I really hope one day you get there you deserve it.
@austinniemela2 жыл бұрын
Thank you! I hope so too!!
@christopherlmartin252 жыл бұрын
OMG Austin's toy chest makes me jealous 🤣 so many cool trucks, I wanna get another 'yota to play around with. That engine is stunning and I can't wait to see it running and see how it drifts...
@dandorris85312 жыл бұрын
Nice work, on a fresh rebuild with that style of oil pump, I like to pack vaseline in and around the oil pump gears to help create instant oil pick up upon engine crank to prime, Just a trick I learned years ago.
@iMuyanCODM2 жыл бұрын
cant wait to hear the sound
@1971holden2 жыл бұрын
Yogi from Australia here, Love the vids mate... own a 2011 79 series land cruiser single cab, but also own a 1995 rn110r extra cab hilux which had the 22R in it, blew that motor up 3 times... (LOL)..... It now has a Holden L36 ecotec V6 in it, but recently picked up a Holden L67 Supercharged V6 that I will be putting in it soon, I'm not sure how things work in the US but here in Aus we need to do Engineering checks on engine conversions if your upgrading to bigger engines to drive on the road ( Oh the fun lol )... Loved the big red build from 2 years ago, I find myself re-watching that from time to time for inspiration....
@AntonioClaudioMichael2 жыл бұрын
That header looks sweet
@moedalgarny2 жыл бұрын
that engine looks amazing
@AntonioClaudioMichael2 жыл бұрын
Great work Austin
@mas.finland2 жыл бұрын
Your work has been so wonderful. Greetings from Finland
@josephdavis2427 Жыл бұрын
I pride myself on solid internals, no shortcuts and a killer looking engine dress. I tip my cap sir, great job!
@makah213 ай бұрын
That matte is in great taste. Looks great!
@mdmn81602 жыл бұрын
Much love from Burundi 🇧🇮
@DARKHORSE2622 жыл бұрын
I had my 22re rebuilt at 200k runs better than ever....strong reliability 🤟
@Max-ik9qb2 жыл бұрын
Killer work! That distributor though it's almost bigger than the entire motor.
@guylongley15732 жыл бұрын
Awesome job! I've built a butt load of those motor combos. From trucks to race cars.👍
@johncourtneyscott27572 жыл бұрын
Almost there! That motor does look good
@polehale2 жыл бұрын
yessir 👌🏾🍻 those side drafts remind me of high school ole son! hell yeah!
@mahdialsenussi30662 жыл бұрын
Nice work that engine looks amazing👍
@ValentinArzola2 жыл бұрын
Awesome video entertaining to watch definitely a Master Toyota Restoration.
@panoslitestout9199 Жыл бұрын
great work from other planet!!!!!!!!!congrats
@williamhorn42902 жыл бұрын
Brilliant work
@bailey70672 жыл бұрын
Engine looks awesome man!
@austinniemela2 жыл бұрын
Thanks!!
@bishop23552 жыл бұрын
That engine looks bad ass! Great Job!
@theemekanix2 жыл бұрын
Most beautiful 22r. Good choice of colors
@waynesmith30572 жыл бұрын
Love the look of the engine so sweet can’t wait to hear her run
@tradeMark1822 жыл бұрын
Such a grow on the tube Austin .... great work on the build lets go OG subs
@petar4432 жыл бұрын
Neat.😎 I hope this guy someday makes a 1 ton truck build.
@poodymeiner31252 жыл бұрын
It is a treat to watch you work. Nice video
@bobadams13352 жыл бұрын
That motor is amazing. Nice work.
@martindelaconcha2300 Жыл бұрын
Awesome engine men !! So clean, I just put my hands on a 86 Toyota Tercel (3A Engine) and I look forward to follow your steps and give some love to my engine
@michaelmiller6062 Жыл бұрын
Wow. That’s gorgeous!
@jimmyy92732 жыл бұрын
Looks sick mate, well done
@rstezza2 жыл бұрын
This has to be one of the nicest colour combinations for an engine. Love it! (Gonna do my old school mitsu😉)
@austinniemela2 жыл бұрын
Thanks! I am digging the colors as well!
@rstezza2 жыл бұрын
@@austinniemela that’s satin bronze is too cool 👌
@AntonioClaudioMichael2 жыл бұрын
The red Sets off the valve cover very nice whis there was accessories like that for the 5vz and a few other yota engines
@luiscruz-no3ib2 жыл бұрын
Use a 3/4 copper pipe seal the ends install below intake so can not be seen and you will have a vaccum chamber
@marcionunes54162 жыл бұрын
O motor está ficando uma jóia!!! Um abraço do Brasil 🇧🇷
@davidlorenz631410 ай бұрын
Dude. Pure 22R Pr0n !! I love it. My first 22R was also carbuerated, but I'm in Kalifornia, so it was handicapped by smog regs as is my current 22RE (1994 pickup) ... but it's something I know I can keep running for so much less than the cost of new. Now getting ready to move out of The People's Republic, and really looking forward to re-doing it as a Smog Free motor.
@Spiritof_767 ай бұрын
You may not have lived during it, but the smog in California cities was atrocious. Smog and acid rain were problems that governments needed to address. I'm fairly certain that the Chinese cities you are comparing to have not fixed this problem and the citizens are just breathing it.
@bernardcrane7502 жыл бұрын
Engine turned out stunning!
@austinniemela2 жыл бұрын
Thanks!
@achilleaustin44772 жыл бұрын
Too keen for the next video haha wish you would upload every day
@austinniemela2 жыл бұрын
Yeah that would be nice but I can’t paint, build and film a engine build in 1 day haha
@JoseLima-fj3wu2 жыл бұрын
Greatings from Portugal 👍
@tylersmith2932 жыл бұрын
That is pretty. Love the bronze.
@jvogler_art47082 жыл бұрын
awesome build, i really wanna do a 20/22r hybrid build with dual webers in an old celica GT
@PauloLima-bm3eo2 жыл бұрын
This engine is a work of art awesome mate
@towboatjeff2 жыл бұрын
That engine is a work of art!
@williamrose39202 жыл бұрын
Can’t wait to see it all finished
@Giroux68 Жыл бұрын
beautiful build, you do amazing work.
@dezfan2 жыл бұрын
Engine looks tight.😎
@larutadelpresente41562 жыл бұрын
Austin!, you´re amazing! you´re the man! incredible job!
@austinniemela2 жыл бұрын
Thank you!!!
@noahvega14422 жыл бұрын
Looks f***ing amazing homie👌🏽
@bmxtaz2 жыл бұрын
So clean, classy and elegant. Really surprised you didn't paint the head. Either way looks amazing.
@richmill60432 жыл бұрын
Beautiful piece of art! 👌
@victoraguilar81882 жыл бұрын
Saludos desde Los Cabos, viendo estos videos me anima a arreglar mi Toyota Hilux 1986 4WD, no se nada de esto y gracias a estos videos, cada vez más entiendo esto el mundo de los motores. No puedo esperar a terminar de ver estos proyectos
@TheSeriesofTubes2 жыл бұрын
My boy ain’t capping this thang is mint
@FlawedOffroad2 жыл бұрын
So frickin minty,that color combo is fire
@simphiwedlamini402 жыл бұрын
It is looking good my brother
@RM_Garage2 жыл бұрын
Looks great dude! Hope my rebuild looks as pretty when I'm done lol
@jesuscamarillo-reyes2 жыл бұрын
That is art😮 looks amazing
@mkmccoy6929 Жыл бұрын
Sweet!!! I have 87 gen one 4 runner with a r22 with a single Webber ... With 363k on it and running strong !!! But fixing to rebuild A new motor for the old gal ... And give her 2 Webber's !!!
@outdoorjay80122 жыл бұрын
Might be ready for Sema in November 🔥
@wallybigwheels89933 ай бұрын
Awesome job!😎
@andrewgraham99772 жыл бұрын
Really nice; much respect for your mad skills.
@xysmommy9 ай бұрын
Great Video Brotha.
@jesusbakle29722 жыл бұрын
Super clean love your vids thank you for sharing
@rubica17 ай бұрын
10:36 Love when KZbinrs reveal their mistakes and show how they will go about fixing it.
@tashreeqdalvie74442 жыл бұрын
Love it, process is job well done 👌😎💯
@gabefernandez59152 жыл бұрын
Clean work as always! 👍🏻
@joesobaski19662 жыл бұрын
Yea that color scheme🔥💥🔥💥🔥
@fu438310 ай бұрын
thanks for telling me about that bolt in the timing cover.... i have a leak there and i didnt use sealant
@maddgoatee97082 жыл бұрын
That engine is art. Almost to good looking to use.
@mgolf2772 жыл бұрын
Looks great! Nice job
@charliebruceortega84472 жыл бұрын
Everything looking good, gonna have to do a nice paint job
@QuickAF Жыл бұрын
Easily the cleanest 22R I've seen 👍
@i_run_far11322 жыл бұрын
Looks incredible!
@austinniemela2 жыл бұрын
Thank you!
@OzBull2 жыл бұрын
Great work mate love it.
@donkov53222 жыл бұрын
Hell ya ,looks amazing as usual.
@2mo2time2 жыл бұрын
Man i really enjoyed this, sema truck!!!!!!
@BoogimanBoogiman2 жыл бұрын
Nice work bro
@lawrencemercieca2 жыл бұрын
easy problem fix for the gasket is take it to a gasket maker, they can just recut a new one larger You can also go to a sticker cutter, or sign writer and just bring them a paper gasket to cut Costas a bit more but gives a lot of peace of mind Also reccomend on paper gaskets is to coat with oil before you seal, not saturate it, but a quick light coat, means that if you need to go back in again you probably won't tear the gasket, I know you should always replace a gasket, but it has sure saved me on 50+ year old bikes that you can't just get a new gasket in a day or so
@richardbrowne36412 жыл бұрын
Did you ever have a problem blowing head gaskets on your Toyota 22R? I had my engine rebuilt twice because the head gaskets kept blowing out. Goto L.C. ENGINERING for gaskets and performance parts. They sell stroker kits with 94 m.m. pistons. They have 94 m.m. head gaskets.